DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Multifeed 3 - 80N Barfeeder. S/No. 4661 (2002), Hours 40691& 16285. S/No. 938204 (2002)

Please Note: Filtermist shown not included in this lot, can be purchased separately.

Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Filtermist FX3000 Oil Mist Filter suitable for DMG Gildemeister CTX310 CNC Lathe

Combination of lot 1 & 1A Lot 1 - DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Multifeed 3 - 80N Barfeeder. S/No. 4661 (2002), Hours 40691& 16285. S/No. 938204 (2002)

Location: This lot is located in Burton-on-Trent. A charge of ?350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Lot 1A - Filtermist FX3000 Oil Mist Filter suitable for DMG Gildemeister CTX310 CNC Lathe

DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Barfeed. S/No. 4662 (2002) Hours 39693 & 14215. S/No. 938205 (2002)

Please Note: Filtermist shown not included in this lot, can be purchased separately.

Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Filtermist FX3000 Oil Mist Filter suitable for DMG Gildemeister CTX310 CNC Lathe

Combination of lot 2 & 2A

Lot 2 - DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Barfeed. S/No. 4662 (2002) Hours 39693 & 14215. S/No. 938205 (2002) 

Location: This lot is located in Burton-on-Trent. A charge of ?350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Lot 2A - Filtermist FX3000 Oil Mist Filter suitable for DMG Gildemeister CTX310 CNC Lathe

Citizen Cincom C16 VT Sliding Head CNC Lathe with Mitsubishi Meldas 635 CNC Control, Machining Size 16mm Max, Machining Length 200mm Max, Spindle Though Hole Diameter 20mm, Main Spindle Speed 2- = 10,000rpm, Iemca Genius 118 Type 37LL Barfeeder. S/No. 020425BA02 (2004), Filtermist MX10 Oil Mist Filter Extractor. S/No. E5516 (2004)

Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. E01804

Please Note: Filtermist shown not included in this lot, can be purchased separately.

Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Filtermist F7 Oil Mist Filter Extractor suitable for Nakamura - Tome TMC - 15 CNC Lathe

Combination of lot 4 & 4A

Lot 4 - Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. E01804

Location: This lot is located in Burton-on-Trent. A charge of ?350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Lot 4A - Filtermist F7 Oil Mist Filter Extractor suitable for Nakamura - Tome TMC - 15 CNC Lathe

Hardinge Conquest GT Super Precision CNC Platten Lathe with GE Fanuc 18TB CNC Control, Hours 37637. S/No. GTA - 959 - B

Please Note: Filtermist shown not included in this lot, can be purchased separately.

Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Filtermist F7 Oil Mist Filter Extractor suitable for Hardinge Conquest GT Super Precision CNC Platten Lathe

Combination of lot 5 & 5A

Lot 5 - Hardinge Conquest GT Super Precision CNC Platten Lathe with GE Fanuc 18TB CNC Control, Hours 37637. S/No. GTA - 959 - B 

Location: This lot is located in Burton-on-Trent. A charge of ?300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Lot 5A - Filtermist F7 Oil Mist Filter Extractor suitable for Hardinge Conquest GT Super Precision CNC Platten Lathe

Feeler Series II High Accuracy Lathe, Model FTL - 618E1 with Anilam Wizard Lathe Series 2 Axis DRO. S/No. 7M171 (1987)

Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Selection of 5C Collets for Hardinge Lathe incl. Racks

Combination of lot 6 & 6A

Lot 6 - Feeler Series II High Accuracy Lathe, Model FTL - 618E1 with Anilam Wizard Lathe Series 2 Axis DRO. S/No. 7M171 (1987)

Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Lot 6A - Selection of 5C Collets for Hardinge Lathe incl. Racks

Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. 01908

Please Note: Filtermist shown not included in this lot, can be purchased separately.

Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Filtermist Oil Mist Filter Extractor suitable for Nakamura - Tome TMC - 15 CNC Lathe

Combination of lot 8 & 8A

Lot 8 - Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. 01908

Location: This lot is located in Burton-on-Trent. A charge of ?300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Lot 8A - Filtermist Oil Mist Filter Extractor suitable for Nakamura - Tome TMC - 15 CNC Lathe

Bridgeport VMC 600 XP Vertical Machining Centre with GE Fanuc Series 18i - M CNC Control, Table Size 835mm x 415mm, Travels X Axis 600mm, Y Axis 410mm, Z Axis 520mm, BT40 Spindle Taper, Spindle Speed Max 6000rpm, 22 Tool ATC, Machine Weight 2500kg, S.No. 723218 (2002)

Please Note: Filtermist shown not included in this lot, can be purchased separately.

Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

LNS Fox WS2 1000 Oil Mist Filter suitable for Bridgeport VMC 600 XP Vertical Machining Centre. Serial No. 17120005110 (2022)

Combination of lots 9 & 9A

Lot 9 - Bridgeport VMC 600 XP Vertical Machining Centre with GE Fanuc Series 18i - M CNC Control, Table Size 835mm x 415mm, Travels X Axis 600mm, Y Axis 410mm, Z Axis 520mm, BT40 Spindle Taper, Spindle Speed Max 6000rpm, 22 Tool ATC, Machine Weight 2500kg, S.No. 723218 (2002)

Location: This lot is located in Burton-on-Trent. A charge of ?350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Lot 9A - LNS Fox WS2 1000 Oil Mist Filter suitable for Bridgeport VMC 600 XP Vertical Machining Centre. Serial No. 17120005110 (2022)

Bridgeport VMC 600 XP Vertical Machining Centre with GE Fanuc Series 18i - M CNC Control, Table Size 835mm x 415mm, Travels X Axis 600mm, Y Axis 410mm, Z Axis 520mm, BT40 Spindle Taper, Spindle Speed Max 6000rpm, 22 Tool ATC, Machine Weight 2500kg. S/No. 723217 (2002)

Please Note: Filtermist shown not included in this lot, can be purchased separately.

Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

LNS Fox WS2 1000 Oil Mist Filter suitable for Bridgeport VMC 600 XP Vertical Machining Centre. Serial No. 17120005719 (2023)

BT40 Spindle Tooling in Mobile Storage Trolley

Combination of Lots 10 & 10A

Lot 10 - Bridgeport VMC 600 XP Vertical Machining Centre with GE Fanuc Series 18i - M CNC Control, Table Size 835mm x 415mm, Travels X Axis 600mm, Y Axis 410mm, Z Axis 520mm, BT40 Spindle Taper, Spindle Speed Max 6000rpm, 22 Tool ATC, LNS Fox WS2 1000 Oil Mist Filter, Machine Weight 2500kg. S/No. 723217 (2002)

Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Lot 10A - BT40 Spindle Tooling in Mobile Storage Trolley. Serial No. 17120005719 (2023)

Bridgeport Interact 1 CNC Knee Type Milling Machine with Heidenhain TNC 151 CNC Control, Table Travels X Axis 357mm, Y Axis 305mm, Z Axis Quill 127mm, Z Axis Knee 365mm, No. 30 Quick Change Spindle Taper, Spindle Speeds 40 - 4000rpm. S/No. 6484110887C

Location: This lot is located in Burton-on-Trent. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Jones & Shipman 540 Surface Grinder, Cap 6" x 18", 450mm x 150mm Magnetic Vice, Coolant Tank, Imperial Dials. S/No. 73671 - 1870/116

Location: This lot is located in Burton-on-Trent. A charge of £75 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Jones & Shipman 1070M Cylindrical Grinder, Coolant Tank. S/No. BO 14150

Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Jones & Shipman 1070 Cylindrical Grinder, Coolant Tank. S/No. BO 13884

Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

HPC Ask 27T Rotary Screw Air Compressor, Working Pressure 8.0 Bar, Motor Power 15.0kW, Option K1 - T2, Hours 47249 - 10751 - 865 at time of Catalogue. S/No. 1797 (2005)

Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Avelair ADQ 38 Compressed Air Dryer. S/No. 230008910 (2023)

Location: This lot is located in Burton-on-Trent. A charge of £25 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Selection of ER32 - ER20, DA180 & DA200 Collets

Selection of B42 & F58 Collets on Mobile Storage Trolley

Selection of 16DS & 16C Collets Suitable for Hardinge Lathe

Selection of Collet Chucks incl. Crawford CDC42, DEL UK SC AS

Selection of HSS Drills & Taps in Multi Drawer Cabinets

Selection of HSS Milling Cutters, Lathe Tooling & Tips in Top Drawer Multi Drawer Cabinets

Steel 27 Drawer Cabinet

Wooden Top Work Bench Single Door Cabinet 1370 x 510 x 870

Wooden Top Work Bench 5 Drawer Cabinet 1370 x 510 x 870

Wooden Top Work Bench 5 Drawer Cabinet 1370 x 510 x 870