Please click here to view a brochure for this equipment

Combination of Lots 1A - 1L

Schumag Drawing Machine with Annealing Line, Standard Version KZP-1B, Pulling Force 3 Tons, Pulling Speed 120 metres per minute, Minimum Exit DIA 6mm, Minimum Tube Length 3m, Maximum Tube Length 6m 

(2) De-coilers

(3) Dancers - 2 - Schlak Type TZ02 Dancers. S/No. 24.371, 1 – Schlak Type HOT 500 Dancer. S/No.24.374

Danieli Straightening Machine by FMI SPA. S/No. 001 with Marking Device

Dual Induction/Annealing Unit with Cooling Section Extraction - DCS System Lauer Control Console

Paul Troester Pulling Unit

Schlak Type LTA 200 Tensioner S/No. 24.374

Friedr Krollman Type HRA4-65 Crimper/Pointing Machine with Hydraulics

Schumag Type K2-P-1B/3 / Drawing Machine with Chiller Unit Control and Electrical Cabinets

Sea Type G00 3VPS Flying Cut Off with Siemens Multi Panel Touch Screen Control and Electrical Cabinets

Product Stacker with Guiding Rolls, Logomatic 804 Labeller with OP7 Simatic Siemens Control, Swarf Take off. S/NO. 2020184

LHR Filter Type DFV2 1-1.012 Dust Extraction System S/No. 845 900 with Siemens Control

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

(2) De-coilers

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

(3) Dancers - 2 - Schlak Type TZ02 Dancers. S/No. 24.371, 1 – Schlak Type HOT 500 Dancer. S/No. 24.374

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Danieli Straightening Machine by FMI SPA. S/No. 001 with Marking Device

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Dual Induction/Annealing Unit with Cooling Section Extraction - DCS System Lauer Control Console

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Paul Troester Pulling Unit. S/No. 253045 (1992)

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Schlak Type LTA 200 Tensioner. S/No. 24.374

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Friedr Krollman Type HRA4-65 Crimper/Pointing Machine with Hydraulics

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Schumag Type K2-P-1B/3 / Drawing Machine with Chiller Unit, Control and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Sea Type G00 3VPS Flying Cut Off with Siemens Multi Panel Touch Screen Control and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Product Stacker with Guiding Rolls, Logomatic 804 Labeller with OP7 Simatic Siemens Control, Swarf Tak off. S/No. 2020184

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

LHR Filter Type DFV2 1-1.012 Dust Extraction System S/No. 845 900 with Siemens Control

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Combination Lots of 2 & 2A

Firbimatic Degreasing Unit – Working Degreasing Chamber, Reserve Heating, Steam Generator and Refrigerating Plant, Max Coil Weight 2.5t, Max Coil Diameter 750mm, Min Pipe Diameter 12mm, Max Pipe Diameter 54mm, Min Pipe Length 3m, Max Pipe Length 7.5m, Cycle Time approx. 30 min, Operating Voltage 400(V), Connected Load 180kw 185 A, Amount of Solvent 13,000 litres (2005)

and

Spares for Degreasing Unit

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Firbimatic Degreasing Unit – Working Degreasing Chamber, Reserve Heating, Steam Generator and Refrigerating Plant, Max Coil Weight 2.5t, Max Coil Diameter 750mm, Min Pipe Diameter 12mm, Max Pipe Diameter 54mm, Min Pipe Length 3m, Max Pipe Length 7.5m, Cycle Time approx. 30 min, Operating Voltage 400(V), Connected Load 180kw 185 A, Amount of Solvent 13,000 litres (2005)

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Spares for Degreasing Unit

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Combination of Lots 3A - 3J

Innse Rotary Piercing Mill with

Innse Continuous Billet Feeding System with Bridge Crane, Brocker Straightening Unit, Controls and Electrical Cabinets
Ludwig OFAG Indugas Gas Heated Charging & Discharging Billet Furnace, Heat Exchanger

Siemens Main Electric Motor, Gearbox and Transmission System, Innse Billet Pusher, Milling, Water Cooling, Filtration and Treatment, Controls and Electrical Cabinets.

Chain Take off Unit with Roll Away Device, Controls and Electrical Cabinets, Schlak Type SRT-OST Cut off Saw. S/No. 32600 (2012), Schlak Type SRT-EST Cut Off Saw and Siemens Multipanel Touch Screen.

Tooling for Pierching Mill

Arbus 1 Ton Jib Crane with Demag Hoist

Please Note: These Items are located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Innse Continuous Billet Feeding System with Bridge Crane, Brocker Straightening Unit, Controls and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Ludwig OFAG Indugas Gas Heated Charging & Discharging Billet Furnace, Heat Exchanger

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Innse Rotary Piercing Mill with Siemens Main Electric Motor, Gearbox and Transmission System, Innse Billet Pusher, Milling, Water Cooling, Filtration and Treatment, Controls and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Chain Take off Unit with Roll Away Device, Controls and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

and

Schlak Type SRT-OST Cut off Saw. S/No. 32600 (2012)

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Please click here to view a specification sheet for this equipment

Schlak Type SRT-EST Cut Off Saw.

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

and

Siemens Multipanel Touch Screen

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Please click here to view a specification sheet for this equipment

Please Note: This Lot consists of Lots 3D to 3G

Tooling for Pierching Mill

Please Note: This Item is located in Germany, unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Arbus 1 Ton Jib Crane with Demag Hoist

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Spares for LOI Billet Furnace

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Spares for Piercing Mill

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Combination of Lots 6, 6A, 6B & 6C

Lot 6 - SMS/MEER/ Cold Pilger Rolling Mill, (3) x 115 VMR, number of Billets (3), Continuous Chain, Shell Transportation System with Feeding Table, Strokes 90 maximum – 85 per minute actual, Feed Rate 15.8 / 14.1mm Stroke, Shell Length 14,000mm Max, 8000 Minimum, Shell Dia Outer 115m Inner 89mm, Shell Weight 500KG, Exit Material: Tube Dia Outer 58mm Inner 53.2mm, Max Tube Eccentricity: % + - 2, Main Electric DC Motor 950KW 800 RPM with Controls, Reserve Main Clutch, Kind & Co/ Century Calibrating Roller 610mm dia x 220mm width, Tools Calibrating Roller Material. No. TQ1/1.2344, Calibrating Roller Hardness (HRc), Chrome Plate Mandrels – Material 1.2363, Thickness 0.003mm Hardness (HRc) 54-56 Pushing Device, Push Rods x 4, Noise Protection Hood with Controls, Chain Shell Transport System, Emulsion System with Controls, Tube Guilding System – Pilger Tunnel, Turning Device for Pilger Tools, Mandrel Support, Delimon Central Lubricating System, Controls and Electrical Cabinets

Lot 6A - Tooling for Pilger Rolling Mill

Lot 6B - Spares

Lot 6C - Die Polishing Machines

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

SMS/MEER/ Cold Pilger Rolling Mill, (3) x 115 VMR, number of Billets (3), Continuous Chain, Shell Transportation System with Feeding Table, Strokes 90 maximum – 85 per minute actual, Feed Rate 15.8 / 14.1mm Stroke, Shell Length 14,000mm Max, 8000 Minimum, Shell Dia Outer 115m Inner 89mm, Shell Weight 500KG, Exit Material: Tube Dia Outer 58mm Inner 53.2mm, Max Tube Eccentricity: % + - 2, Main Electric DC Motor 950KW 800 RPM with Controls, Reserve Main Clutch, Kind & Co/ Century Calibrating Roller 610mm dia x 220mm width, Tools Calibrating Roller Material. No. TQ1/1.2344, Calibrating Roller Hardness (HRc), Chrome Plate Mandrels – Material 1.2363, Thickness 0.003mm Hardness (HRc) 54-56 Pushing Device, Push Rods x 4, Noise Protection Hood with Controls, Chain Shell Transport System, Emulsion System with Controls, Tube Guilding System – Pilger Tunnel, Turning Device for Pilger Tools, Mandrel Support, Delimon Central Lubricating System, Controls and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Tooling for Pilger Rolling Mill

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Spares

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Die Polishing Machines

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Marshall Richard Pre-Draw Spinner Block MR 1, Circular Sawing Unit from Pilger Tubes Transportation and Storage Area, Direction of Rotation - Right Clockwise, Block Dia 2134, Maximum Tube Inlet Dia 58mm, Maximum Wall Thickness 2.4mm, Minimum Tube Oulet Dia 6mm x 1mm Wall Thickness, Maximum Carriage Force 12 Ton, Pulling Speed 750 m/min, Basket Circulation System with Dual Basket Lifting Devices, (4) - Tube Transport Baskets, Dancers, Crimping/Machine Pointing, Pre-Straightner Control, Spinner Block, Discharge Table 1500kg Capacity, Electrical Control, Lubrication System and Transformer (1978) (Modifications 1998 Controls, 2003 Drum)

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Circular Sawing Unit for Tubes from Pilger Mill with Pre Straightener, Out-feed Conveyor, Controls and Electrical Cabinets

Please Note: This item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Overhead Tube Transportation System from Pilger Mill with Storage Bays - Approx. 120 metres in length, Siemens Simatic OP 17 Control and Electrical Cabinets

Please Note: This item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Counter Balanced Crimper/Pointing Machine with Pre-straightner, Jib Crane Rexforth Hydraulics, Siemens Simatic Panel Touch Screen and Electrical Cabinets

Please Note: This item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Rotary Crane System with 2 Tube Transport Basket Lifting Devices with Controls and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Marshall Richard Spinner Block with Basket Circulating System, Infeed Roller Table, Siemens Simatic OP37 Control, Electrical Cabinets and Transformer

Please Note: This item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Marshall Richard Pre-Draw Spinner Block MR 2, Direction of Rotation - Right Clockwise, Block Dia 2134, Maximum Tube Inlet Dia 58mm, Maximum Wall Thickness 2.4mm, Minimum Tube Oulet Dia 6mm x 1mm Wall Thickness, Maximum Carriage Force 10.9 Ton, Pulling Speed 1000m/min, Basket Circulation System with Basket Lifting Devices, (4) - Tube Transport Baskets, Dancers, Crimping/Machine Pointing, Pre-Straightner Control, Spinner Block, Discharge Table 1500kg Capacity, Electrical Control, Lubrication System and Transformer (1974/1979) (Modifications 1998)

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Rotary Crane System with 2 Tube Transport Basket Lifting Devices, Siemens Simatic Panel Touch Screen Control and Electrical Cabinets

Please Note: This lot is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Friedr. Krollman HRA 4/65KVH Counter Balanced Crimper/Pointing Machine with Pre-straightner, Jib Crane Rexforth Hydraulics, Control and Electrical Cabinets. S/No. 11093 (1992)

Please Note: This item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Marshall Richard Spinner Block with Basket Circulating System, Infeed Roller Table, Siemens Simatic OP37 Control, Electrical Cabinets and Transformer

Please Note: This item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Marshall Richard Pre-Draw Spinner Block MR 3, Direction of Rotation - Right Clockwise, Block Dia 2134, Maximum Tube Inlet Dia 29mm, Maximum Wall Thickness 1.45mm, Minimum Tube Oulet Dia 6mm x 1mm Wall Thickness, Maximum Carriage Force 7.9 Ton, Pulling Speed 1120 MPH min, Basket Circulation System with Basket Lifting Devices, (4) - Tube Transport Baskets, Dancers, Crimping/Machine Pointing, Pre-Straightner Control, Spinner Block, Discharge Table 1000kg Capacity, Electrical Control, Lubrication System and Transformer (1979) (Modifications 1998)

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Rotary Crane System with 5 Tube Transport Basket Lifting Devices, Controls and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Friedr. Krollmann Counter Balanced Crimper/Pointing Machine HRA 4/65-4 KVH-h with Pre-straightner, Jib Crane Hydraulics, Control and Electrical Cabinets. S/No. 2009-13269 (2009)

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Marshall Richard Spinner Block with Basket Circulating System, Infeed Roller Table, Siemens Controls, Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Marshall Richard Pre-Draw Spinner Block MR 4, Direction of Rotation - Right Clockwise, Block Dia 2134mm, Maximum Tube Inlet Dia 45mm, Maximum Wall Thickness 2.1mm, Minimum Tube Oulet Dia 6mm x 1mm Wall Thickness, Maximum Pulling Carriage Force 8.1 Ton, Pulling Speed 900 m/min (meters per min), Basket Circulation System with Basket Lifting Devices, (4) - Tube Transport Baskets, Dancers, Crimping/Machine Pointing, Pre-Straightner Control, Spinner Block, Discharge Table 1500kg Capacity, Electrical Control, Lubrication System (1986) (Modifications 1990)

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Rotary Crane System with 2 Tube Transport Basket Lifting Devices, Controls and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

AMAG Counter Balanced Crimper/Pointing Machine with Pre-straightner, Jib Crane, Hydraulics, Control and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Marshall Richard Spinner Block Serial/No. M853311/13P with Basket Circulating System, Infeed Roller Table, Siemens Controls, Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

(3) x Schlak 3 Metre Powered Infeed Roller Tables with Two Pneumatic Coil Lamps

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

(3) Powered Roller Conveyor Systems

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Spares for Spinner Blocks

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

(16) 10ft x 2ft Tube Transport Baskets

Please Note: These are sample photographs

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

(16) 10ft x 2ft Tube Transport Baskets

Please Note: These are sample photographs

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

(16) 10ft x 2ft Tube Transport Baskets

Please Note: These are sample photographs

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

(16) 10ft x 2ft Tube Transport Baskets

Please Note: These are sample photographs

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

(16) 10ft  x 2ft Tube Transport Baskets

Please Note: These are sample photographs

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

(16) 10ft x 2ft Tube Transport Baskets

Please Note: These are sample photographs

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

(16) 10ft x 2ft Tube Transport Baskets

Please Note: These are sample photographs

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

(16) 10ft x 2ft Tube Transport Baskets

Please Note: These are sample photographs

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

(16) 10ft x 2ft Tube Transport Baskets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

(16) 10ft x 2ft Tube Transport Baskets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.