Hurco VM20 Vertical Machining Centre with Max Control, Spindle Speed 8,000rpm, Table Size 1170mm x 510mm, 20 Station ATC, CAT40 Tooling. S/No. H-V2E0089 (2009)

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

 

Sterling STC650 DGSA NC Twin Column Semi Automatic Bandsaw, 415V, Hydraulic Top Clamps, Powered Infeed Roller Track 8m, Powered Outfeed Roller Track 18m with NC Measuring System. S/No. 56000097 (2022)

 

Unfortunately there are no loading facilities on site.

 

 

 

Mazak Quick Turn Smart 200M with Mazatrol Smart Control, 215mm 2 Jaw Chuck, 12 Station ATC, Live Tooling, Powered Tail Stock, Travel X = 225mm, Z = 605mm, Swarf Conveyor. Serial No. 223306 (2011) 

 

Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Mori Seiki NTX2000/1500 2nd Gen Mill/Turn with Celos/F31iB5 Control, Max Swing of Workpiece 700mm, Max Swing over Cross-Slide 700mm, Max Distance Between Centres 1842mm, Max Turn Length 1538mm, Main Spindle Kitagawa 210mm dia Chuck @ 5,000rpm, Sub-Spindle Kitagawa 210mm dia Chuck @ 5,000rpm, Milling Spindle Capto C6 @ 12,000rpm, 76 Position ATC, 12 Station Turret, Hydrajet MS30-1000-70 Bar High Pressure Coolant, Machine Dimensions (LxWxH) 6205 x 2830 x 2750mm, Machine Weight 18,950kgs. S/No. NTX23200821 (2020)

 

Further Information

Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001). Country of Origin: Germany

 

Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.

 

Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.

https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

 

 

Filtermist Fx4002. S/No. A17335

 

Location: This lot is located in Birmingham, UK. A charge of £25 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

 

Hurco 4th Axis Unit suitable for Hurco VM20, Model H-200, Tailstock. S/No. P200-0375 (2011)

Combination of lot 1 & 1A

 

Lot 1 - Hurco VM20 Vertical Machining Centre with Max control, Spindle Speed 8,000rpm, Table Size 1170mm x 510mm, 20 Station ATC, CAT40 Tooling. S/No. H-V2E0089 (2009)

 

Lot 1A - Hurco 4th Axis Unit suitable for Hurco VM20, Model H-200, Tailstock. S/No. P200-0375 (2011)

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Combination of lots 1 & 1A

Lot 1 - Mazak Quick Turn Smart 200M with Mazatrol Smart Control, 215mm 2 Jaw Chuck, 12 Station ATC, Live Tooling, Powered Tail Stock, Travel X = 225mm, Z = 605mm, Swarf Conveyor. Serial No. 223306 (2011) 

 

Lot 1A - Filtermist Fx4002. S/No. A17335

 

Location: This lot is located in Birmingham, UK. A charge of £375 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Hurco VMX24S Vertical Machining Centre with Hurco Ultimax Control, table size 760mm x 510mm, 24 ATC, BT 40 Tooling, 8000rpm, travel X=610mm Y= 508mm Z= 610mm, Coolant Tank. S/No. H-2S061 (2004)

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Mori Seiki NTX2000/1500SZM Mill/Turn with F31iB5/Celos ERGOline Touch Control, Main Spindle Kitagawa 10”dia Chuck @ 4000rpm, Sub-Spindle Kitagawa 8”dia Chuck @ 5000rpm, 10 Station Turret, Milling Head Capto C6, 76 Position ATC, Hydrajet WP10-1000 High Pressure Coolant, Swarf Conveyor, Machine Weight 15,320kgs. S/No. NTX21180210 (2018)

 

Please Note: We have been made aware of a Tailstock Ballscrew repair needed. Please find attached 2024 quotation for supply and fitting and take this into consideration when bidding on this item.

Further Information

Hurco VMX30S Vertical Machining Center with Hurco Ultimax Control, Table size 1020mm x 510mm, 24 ATC, 8000rpm, Travels on X/Y/Z - 762 x 508 x 610mm, Coolant Tank, BT40 Tooling. S/No. H-3S019 (2005)

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Dahlih DCM 4225 Double Column Machining Centre with Fanuc Series Oi-MF, Table Size 4000 x 2200mm, Travel X/Y/Z= 4200/2000/800mm, Max Table Load 12,000kgs, 40 Tool ATC, Spindle Taper BT50, Max Spindle Speed 6000rpm, Main Motor 26kW (35HP), 20 Bar Through Spindle Coolant, 4th Axis Interface, 300mm Column Extension, Right-Angled Head, Renishaw RMP 60 Probe, Swarf Conveyor, Floor Space 5650 x 11120 x 4130mm, Machine Weight 40,000kgs. S/No. 3006030013 (2017)

Further Information

Mazak Integrex E-650H Multi-Tasking Lathe with Mazatrol PC-Fusion 640M Pro Control, 3000mm B/C, SMW-Autoblock KS-MSW 135-460mm Hydraulic Steady, Boring Bar Attachment, 120 ATC, Swarf Conveyor. S/No. 159927 (2002) Country of Origin: Japan

Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.

 

Please Note: This lot is located in Birmingham, UK. A charge of £4,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

UK Strategic Export Control Legislation (1st April 2024)

The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.

https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

 

 

Mori Seiki SL-253 Twin Spindle Lathe with Mori Seiki MSG-501 Control, 12 Station ATC, 3 Jaw Chuck 250mm, Swarf Conveyor, 170mm 3 Jaw Chuck, Live Tooling

 

Please Note: Tooling Cabinet is not included with this lot

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

 

Colchester CNC 500. S/No. M501599

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

 

Tacchi HD-1450 CNC 725 x 4000 Heavy Duty Centre Lathe. S/No. 6954 (2002) with Siemens Sinumerik 828D, 1000mm Diameter 4 Jaw Double Chuck, Chuck Bore Diameter 515mm, Barrufaldi Ban 400/4 4 Way indexing Tool Post (2) x 3 Point Steadies, Tailstock, Swarf Conveyor, Centre Height 725mm, Max Swing 1450mm Distance beween Centres 4000mm, Main Motor 60kw, Max Workpiece Weight 15,000kg. Country of Origin: Italy

 

Dahlih DMX500 (4+1) Machining Centre with Fanuc Oi-MF Plus Control, Table Size 500mm (dia), Travel X/Y/Z=600/900/560mm, Max Spindle Speed 15000rpm, 40 Position ATC, 20 bar Through Spindle Coolant. S/No. 301302003 (2023)

Further Information

Mazak Integrex E-410H Multi-Tasking Lathe with Mazatrol 640M Pro Control, Serial No. 164385 (2003). Country of Origin: Japan

Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.

 

Please Note: This lot is located in Birmingham, UK. A charge of £4,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

 

 

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.

https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

 

H. Schubert SRP/120/18 Heated Bakerlite Press, Platen Size 600mm x 460mm, Size Between Column 710mm. S/No. 0641 (YOM: TBC). Note: Tooling Not Included. Country of Origin: United Kingdom

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

 

Dahlih MCH630 Horizontal Twin Pallet Machining Centre with Fanuc Series Oi-MF, Pallet Size 630 x 630mm, Travel (X/Y/Z) = 1000/850/800mm, B Axis = 1 deg Positioning, 6000rpm Spindle, Spindle Taper BT50, 60 Position ATC, max Table Load 1200kgs, Floor Space 4500 x 6230 x 3380mm, Machine Weight 18,000kgs. S/No. 3003020094 (2019)

Mazak Variaxis 500-5Xi II Twin Pallet 5 Axis CNC Machining Centre. Serial No. 193582 (2007) with Mazatrol Matrix CNC Control (2024), Pallet Size Capacity 500mm Work Diameter, 405mm Work Height, 300kg Work Mass, 40 Spindle Taper, 12,000rpm Max Spindle Speed, 40 Tool ATC, FSE 1100 Litre Coolant System with Swarf Conveyor, Flow Rate 220 LPM Machine Weight 11500kgs, Manuals

 

Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Mori Seiki NTX2000/1500SZM 5-Axis Mill/Turn with F31iB5 Control, Main Spindle Kitagawa 10”dia Chuck @ 4,000rpm, Sub-Spindle Kitagawa 10”dia Chuck, 76 Position ATC, 10 Station Indexing Turret, Spindle Taper Capto C6, SMW SLU 3.2 Hydraulic Steady, High Pressure Coolant, Swarf Conveyor. S/No. NTX20130611 (2013)

Further Information

Leadwell Vertical Machining Centre Model V-30. S/No. L2TJD0216 (2004) with Fanuc Series Oi-MB Control, 24 Station ATC, Table Size 890mm x 400mm, X Travel 760mm, Y Travel 410mm, Z Travel 410mm, BT 40 Tooling

 

Location: This lot is located in Birmingham, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

MSO Cincinnati Cylindrical Grinder Type R53, Distance Between Centre 300mm, Swing Over Bed 170mm Diameter, Extractor Unit. S/No. 25868 (YOM: TBC). Country of Origin: U.S.A.

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

 

Mori Seiki NTX2000/1500SZ 5-Axis Mill/Turn with MAPPS/F31iB5 Control, Max Workpiece Swing Diameter 660mm, Max Swing Over Cross Slide 660mm, Max Turning Diameter 610mm, Max Turning Length 1540mm, Bar Work Capacity 65mm, Travel X/Y/Z/X2/Z2 = 495/250/1560/160/1402mm, Main Spindle Kitagawa 8”dia Chuck @ 5,000rpm, Sub-Spindle Kitagawa 8”dia Chuck @ 5000rpm, 76 Position ATC, Spindle Taper Capto C6 @ 12,000rpm, High-Pressure Coolant, 10 Station Indexing Turret, Swarf Conveyor, Machine Weight 15,000kgs, Floor Space (LxWxH) 4076 x 2890 x 2626mm. S/No. NTX20111202 (2012)

Further Information

Bridgeport VMC1000/22 Vertical Machining Centre with Heidenhain TNC426/430 PB Control, Table size 1150mm x 490mm, 22 Station ATC, Swarf Conveyor, Spindle Speeds 8,000rpm, X Axis = 1,000mm, Y Axis = 500mm, Z Axis = 500mm. S/No. 821410 (12/1998)

 

Location: This lot is located in Birmingham, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser

Mori Seiki NLX2500SY/700 Turning Centre with MAPPS IV/M730BM Control, Swing Over Bed 920mm, Max Swing Over Cross Slide 742mm, Max Turning Length 705mm, Main Spindle Kitagawa 10”dia Chuck @ 4000rpm, Sub-Spindle Kitagawa 6”dia Chuck @ 6000rpm, 12 Station Turret, High Pressure Coolant, Bar Feed Interface, Swarf Conveyor, Machine Weight 6,360kgs, Floor Space (LxWxH). S/No. NL254130936 (2013)

Further Information

Dean Smith & Grace Manual Lathe, 12" 3 Jaw Chuck, 16" 4 Jaw Chuck, Quick Change Tooling, 1250rpm, 1m Distance Between Centres, Swing 400mm, Guarding. S/No. 38721-3-71

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Mori Seiki NLX2500SY/700 Turning Centre with MAPPS IV/M730BM Control, Swing Over Bed 920mm, Max Swing Over Cross Slide 742mm, Max Turning Length 705mm, Main Spindle Kitagawa 10”dia Chuck @ 4000rpm, Sub-Spindle Kitagawa 6”dia Chuck @ 6000rpm, 12 Station Turret, High Pressure Coolant, Bar Feed Interface, Swarf Conveyor, Machine Weight 6,360kgs, Floor Space (LxWxH). S/No. NL254120730 (2012)

Further Information

Colchester Student 1800 Gap Bed Centre Lathe, Serial No. 4/0010/08420 Tailstock, QCTP, 2 x 3-Jaw Chucks, 2 x 4-Jaw Chucks. Country of Origin: United Kingdom

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

 

Dahlih DMX320 4+1 Machining Centre with Fanuc Series Oi-MF, Table Size 320mm dia, Travel (X/Y/Z)=600/550/500mm, 15000rpm Spindle, 40 Position ATC, 20 Bar Through Spindle Coolant. S/No. 3013010024 (2021)

Further Information

Mori Seiki NVX5100-II/40 Vertical Machining Centre with  MAPPS IV/M730BM Control, Travel X/Y/Z = 1050/530/510mm, Table Size 1350 x 600mm x 1200kgs, Spindle Taper BT40, 30 Position ATC, Max Spindle Speed 13,000rpm, High-Pressure Through Spindle Coolant, Swarf Conveyor, Machine Weight 7,000kgs, Floor Space (LxWxH) 3084 x 2851 x 2597mm. S/No. NV502130614 (2013)

Further Information

AEW Viceroy Horizon Milling Machine, Table Size 860mm x 200mm, 3 Tee Slots, Swivel Milling Head, Spindle Speeds 80 - 3105rpm, Power Feed X Axis, ISO 30 Spindle Taper. S/No. 492/V2UM/71. Country of Origin: United Kingdom

 

Please Note: This lot is located in Burton-on-Trent, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Mori Seiki NMV5000 DCG 5-Axis Machining Centre with F31iA5 Control, Spindle Taper BT40, Max Spindle Speed 12,000rpm (22/18.5kW), 61 Position ATC, Hydrajet WP10-1000 High Pressure Through Spindle Coolant. S/No. NM501JK0592 (2011)

Further Information

XYZ Edge 2000 Turret Mill with Table Size 1230mm x 255mm, Prototrak Edge Dro, Spindle Speeds Max 4200RPM, R8 Spindle Taper. S/No. 10195. Country of Origin: Taiwan

 

Location: This lot is located in Birmingham, UK. A charge of £125 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Kitamura Mycentre HX400G Horizontal Twin Pallet Machining Centre with Arumatik-Mi CNC Control, Table Size 400 x 400mm, Max Pallet Load 350kgs, Travel X/Y/Z=610/610/610mm, 50 Tool ATC, Spindle Taper NST No.40, Spindle Speed 15000rpm, Full B-Axis @ 0.001 deg, Max Workpiece Size 630 x 745mm, 15bar Through Spindle Coolant, Coolant Tank, Swarf Conveyor, Machine Weight 13,800kgs, Dimensions (LxWxH) 4000 x 3100 x 2700mm. S/No. 44140 (2013)

Further Information

Bridgeport Interact 1 Milling Machine with Heidenhain TNC155 Control, Table size 850mm x 310mm, Qty R8 Tooling. S/No. 664131089C. Country of Origin: United Kingdom

 

Location: This lot is located in Birmingham, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Kitamura Mycentre M-4XD Vertical Machining Centre with Fanuc 0i-MD Control, Table Size 1270 x 640mm, Max Table Load 1200kgs, Travel X/Y/Z = 1100/610/610mm, 30 Tool ATC, Spindle Taper NST No.40, Spindle Speed 10,000rpm, Coolant Tank, Swarf Conveyor, Machine Weight 7300kgs, Machine Height 2950mm, Floor Space 3040 (W) x 2250mm (D). S/No. 35018 (2014)

Further Information

Chen Ho CH-V1600S NC Turret Head Milling Machine with Anilam Series 1100 Control, Table Size 1270mm x 255mm, Power Feeds to 3 Axis (Quill not knee), Acro-grip Power Draw Bar (R8 Taper), Vari Speed Spindle Head. S/No. 96037 (1996) Country of Origin: Taiwan

 

Location: This lot is located in Birmingham, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Suga Automotive YV-600A CNC Vertical Lathe with Fanuc Series 0-T CNC Control, 1020mm Dia Magnetic Chuck, 6 Position Tool Turret, Machine Weight 13000kg. S/No. 97V6A0172 (1998)

Emco Turn 342 CNC Lathe with Fanuc OT Control, 2 Axis, 125mm Collet Chuck, 8 Tool Turret. S/No. RSG E2ES 002 S, Run Time 3241 Hours, Sameca Bar Feed Type SAM65. S/No. M062103 (1992) includes Autoblok Chuck, Selection of Tooling & Collets. 

 

Location: This lot is located in Birmingham, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

HME OP20 Power Press, Bed Size 560mm x 400mm, Spare T-slot Bed Plate. S/No. 8477. Country of Origin: United Kingdom

 

Please Note: This lot is located in Burton-on-Trent, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Hordern, Mason & Edwards (HME) LM 12 Power Press, Bed Size 500 x 300mm. S/No. 9473. Country of Origin: United Kingdom

 

Please Note: This lot is located in Burton-on-Trent, UK. A charge of £30 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

DEA Scirocca 201310 Co-ordinate Measuring Machine, Granite Bed Area 2900mm x 1250mm between Columns, Hexagon PC-DMIS CAD ++ Software, Renishaw PH10T Probe Head, Joystick Control. S/No. 00157 (1998

Baty R14XL2 Profile Projector with Heidenhain Quadra-Chek 2 Axis DRO, Digital Angle Finder, Surface Illumination x 10 Lens. S/No. 202774

Jones & Shipman 540 Surface Grinder

 

Location: This lot is located in Birmingham, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Colchester Bantam Centre Lathe, Distance between Centres 470mm, Swing Over Bed 280mm Dia, Spindle Speeds 36-1600rpm, Taper Turning Attachment, 3, 4 Jaw and Face Plate, QCTP and Tool Holders, Steady. Country of Origin: United Kingdom

 

Please Note: This lot is located in Burton-on-Trent, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

No. 6 Manual Fly Press. Country of Origin: United Kingdom

 

Location: This lot is located in Burton on Trent UK. A charge of £10 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Taylor Hobson Model K, Pantograph Engraving Machine. S/No. 110.921.422. Country of Origin: United Kingdom

 

Please Note: This lot is located in Burton-on-Trent, UK. A charge of £25 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Turbex 800 Washing machine

 

Please Note: This Item is located in Burton on Trent, UK. A charge of £25 for electrical disconnection, Purging of Coolant, Blocking of Axis, loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Further dismantling/loading to containers is not included. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

MACC TE250 Pull Down Cut off Saw. S/No. 33076 (1996). Country of Origin: Italy

 

Please Note: This lot is located in Burton-on-Trent, UK. A charge of £25 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Jones & Shipman 540 Surface Grinder with Motorised Crossfeed, Table Size 660mm x 150mm. S/No. D1662. Country of Origin: United Kingdom

 

Location: This lot is located in Birmingham, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. 

Jones & Shipman 540 Surface Grinder, Imperial Dials, Extractor Unit, Light. S/No. BO 93844

 

Location: This lot is located in Birmingham, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Jones & Shipman 540P Surface Grinder, 450mm x 150mm Magnetic Chuck. S/No. BO96354

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Jones & Shipman 310T Tool & Cutter Grinder, Bed Size 750mm x 105mm with Dust Extraction. S/No. BO98054

 

Location: This lot is located in Burton-on-Trent, UK. A charge of £20 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Nassebro Mekaniska Verkstad (Luna) CNC Bending Rolls, Type 8835 18/05 with MyLoc 100 Control Panel, Capacity 1890 x 0.5mm, Machine Weight 900kg. S/No. 1052 (1999). Country of Origin Sweden

 

Location: This lot is located in Birmingham, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

 

Vixen Twin-Arm Blast Cabinet

 

Location: This lot is located in Birmingham, UK. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Technica HMS-5500 Carbide Tool Grinding Machine with Diamond Grinding Wheel Spindles Collets and Wheel Arbors. S/No. 3413

 

Location: This lot is located in Birmingham, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

DMC 365V Deckel Maho with DMG Heidenhain TNC 530 Control. S/No. 1540501589A (2006)

 

Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.