2717 - CNC Machining Centres, Wire EDMs, Engineering Equipment previously used by Boxall & Edmiston in the Manufacture of Bespoke Shotguns

Combination of Lots 4 & 4A

Sodick AQ327L Premium Wire EDM with Sodick LP 33W CNC Premium Control, A.W.F, 650mm x 850mm Tank Size, Taper Cutting (U & V Axis) X = 750mm Y = 500mm Z = 400mm, Linear Motors (XYU Axis), Linear Glass Scale (XYU Axis). S/No. 1190 (2007)

Please Note: Any 3R Tool Holders or Fixtures that may be shown are not included in this lot

and

3R Tooling System

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Sodick AQ35L Ram Type EDM with Sodick LQ1G Touch Screen Control, 4 Axis X = 355mm Y = 254mm Z = 254mm Movements, C Axis to Ram, 4 Station ATC, 400mm x 600mm Table Size, Fire Extinquisher. S/No. 2289 (2007)

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge CHNCI Flatbed CNC Lathe with Fanuc OT Control, 8-Station Cross Slide Turret, Collet Nose, Part off Slide, Filtermist Unit, 5000rpm Spindle, Hardinge Inbuilt Barfeed Attachment. S/No. CN-4371-T

Please Note: Any cutting tools that may be shown are not included with this lot.

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge Tooling Collets

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Hardinge Tooling Collets

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 6, 6A & 6B

Hardinge CHNCI Flatbed CNC Lathe with Fanuc OT Control, 8-Station Horizontal Turret, Collet Nose, Part Off Slide, Filtermist Unit, 5000 RPM Spindle, Hardinge Inbuilt Barfeed Attachment. S/No. CN-4371-T

and

Hardinge Tooling Collets

and

Hardinge Tooling Collets

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Datron CAT 3D-MXL High Speed Router, 1.1m x 3m Table Size, 10-Station Tool Hire, Rotary 4th Axis Unit, Broken Tool Reflection, Spindle Mounted Probe, 60,000rpm Spindle, 3D Servo System, Windows Based XP. S/No. 50840 (2003)

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ Pro 3000 CNC Turret Milling Machine with Proto Trak AGE3 3 Axis Control, 300mm x 1450mm Table, Powered Draw Bar, 70 to 3600rpm Spindle Speed, PTG 4th Axis Unit. S/No. 9497 (2001)

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of International Tooling

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Combination of lots 8 & 8A

XYZ Pro 3000 CNC Turret Milling Machine with Proto Trak AGE3 3 Axis Control, 300mm x 1450mm Table, Powered Draw Bar, 70 to 3600rpm Spindle Speed, PTG 4th Axis Unit. S/No. 9497 (2001)

and

Qty of International Tooling

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.