2717 - CNC Machining Centres, Wire EDMs, Engineering Equipment previously used by Boxall & Edmiston in the Manufacture of Bespoke Shotguns
Engineering
Asta conclusa il
Tempo residuo
Descrizione asta
Location: These Lots are located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Premio dell'acquirente
Il premio dell'acquirente verrà addebitato a 16.00%.
IVA
IVA applicata pari al 20.00%.
Date ispezioni
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Nota Bene: - Qualsiasi traduzione uttilizzando ''Google Translate'' non è garantita come una traduzione accurata ed è solo a scopo di guida. La descrizione principale del lotto è in inglese ed e data a migliore conoscenza del banditore. Tuttavia, la precisione non è garantita e deve essere verificata dall'acquirente prima di fare offerte.
Avviso ai compratori
Termine ultimo pagamento
Termine ultimo ritiro
Spedizionieri
Squadre per il carico
Dettagli Esportazione/importazione dal UK
Lotti 21-30 di 61
Lotto 9: Semco Model LC-186VS CNC Turret Milling Machine
Semco Model LC-186VS CNC Turret Milling Machine with Anilam 3000m 3 Axis Control, 250mm x 1270mm Table Size, Powered Draw Bar. S/No. 85041498
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 10: Gate PBM-1000 Turret Milling Machine
Gate PBM-1000 Turret Milling Machine with Newall DP700 3 Axis DRO with 1.07m x 230mm Table Size, 60-4200rpm Spindle Speed, Powerfeed to X Axis. S/No. 201411011 (2014)
Please Note: The vice is not included with this
lot
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 11: Colchester Student 1800 Straight Bed Lathe
Colchester Student 1800 Straight Bed Lathe, 40’’ between Centres, Quick Change Tool Post, Dual Dials, Collet Attachment, 2 & 3 Point Steadies, Anilam Wizard 2 Axis DRO Ainjest Threading Unit. S/No. 4/0003/06041X
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 12: Jones & Shipman 540P Surface Grinder
Jones & Shipman 540P Surface Grinder with Power Rye and Fall, 18’’ x 6’’ Magnetic Chuck, Coolant Unit. S/No. 64643
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 13: Warco WMT 300/2 Multi-Purpose Lathe/Milling Machine
Warco WMT 300/2 Multi-Purpose Lathe/Milling Machine, 5’’ 3-Jaw Chuck, Tailstock approx. 500mm between centres x 90mm Centre Height, Vertical Milling Unit Mounted to Headstock. S/No. 02 11 (2004)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 14: SCR 10C Receiver Mounted Compressor
SCR 10C Receiver Mounted Compressor, 7.5kw. S/No. SA325577 (2015)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 15: Ecoair A7 Receiver Mounted Compressor
Ecoair A7 Receiver Mounted Compressor, 5.5kw. S/No. 2121636 (1999)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 16: Chester Model HV-128 Horizontal/Vertical Bandsaw
Chester Model HV-128 Horizontal/Vertical Bandsaw capacity 150mm diameter, Round Horizontal Mode. S/No. 11040663
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 18: Startrite 14RF Vertical Bandsaw
Startrite 14RF Vertical Bandsaw, 21’’ x 21’’ Tilting Table
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 19: Gate ECL 86OA CNC Lathe
Gate ECL 86OA CNC Lathe with Anilam H200T Control, 200mm 3 Jaw Chuck. S/No. 144090119718 (2009)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.