2814 - Doosan Puma, Daewoo, Leadwell Lathes and Machining Centres, Mills, Drills and Grinders no longer required by Omal Srl Italy
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Banzi PZ, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com or our Italian Office on: + 39 0732 677063 info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 41-50 de 107
Lot 121A: Qty of Saw Blades
Qty of Saw Blades
Please Note: This lot is located in Italy. Unfortunately,
there are no loading facilities on-site, dismantling and loading
will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 121 & 121A
Combination of Lots 121 & 121A
121- IMET Vertical Bandsaw with 45 Degree Angle. S/No. 022880001 (2002)
and
121A - Qty of Saw Blades
Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 121 | IMET Vertical Bandsaw |
| 121A | Qty of Saw Blades |
Lot 122: Friggi Vertical Bandsaw
Friggi Vertical Bandsaw with 45 Degree Angle
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 123: Opus 350 Vertical Wood Bandsaw
Opus 350 Vertical Wood Bandsaw, Table Size 760mm x 600mm, Throat Size 550mm, Hydraulic Table. S/No. 348 (1999)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 124: Selco WU230 Mig Welder
Selco WU230 Mig Welder, Burning Torch with Trolley for Asesalene. S/No. 010040000036
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 125: OMCN 150 Ton Beam Hydraulic Press
OMCN 150 Ton Beam Hydraulic Press, Table Size 700mm x 570mm, Piston Size 135mm, Pressure 400 Bar. S/No. 07 (2000)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 126: Marpol 120mm Horizontal Belt Linisher
Marpol 120mm Horizontal Belt Linisher. S/No. 1237 (2007)
Please Note: This lot is located in Italy. Unfortunately,
there are no loading facilities on-site, dismantling and loading
will be at the cost of the purchaser.
Lot 127: Femi 150mm Double Ended Grinder
Femi 150mm Double Ended Grinder. S/No. 8148431 and Femi 150mm
Double Ended Grinder with Bench. S/No. 8116431
Please Note: This lot is located in Italy. Unfortunately,
there are no loading facilities on-site, dismantling and loading
will be at the cost of the purchaser.
Lot 128: Box of Carbide Tips
Box of Carbide Tips
Please Note: This lot is located in Italy. Unfortunately,
there are no loading facilities on-site, dismantling and loading
will be at the cost of the purchaser.
Lot 129: Qty of U Drills
Qty of U Drills
Please Note: This lot is located in Italy. Unfortunately,
there are no loading facilities on-site, dismantling and loading
will be at the cost of the purchaser.