2814 - Doosan Puma, Daewoo, Leadwell Lathes and Machining Centres, Mills, Drills and Grinders no longer required by Omal Srl Italy

Engineering

'L''enchère se termine le'

mercredi 25 sept. 2019 at 03:00PM (BST)
Ajouter au calendrier

Temps restant

Temps écoulé

'Description de l''enchère'

Location: These lots are located in Banzi PZ, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Buyer's premium

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 22%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com or our Italian Office on: + 39 0732 677063 info@cottandco.it

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* 'Remarque: l''exactitude de toute traduction effectuée à l''aide de Google Translate n''est pas garantie. Une telle traduction n''est fournie qu''à titre indicatif. La description du lot en anglais est celle qui prévaut et repose sur les meilleures connaissances du commissaire des ventes. Toutefois, son exactitude n''est pas garantie et doit être vérifiée par l''acheteur avant l''enchère.'

Avis aux acheteurs

Date limite de paiement

27 sept. 2019 at 17:00 (BST)

'Date limite d''apurement'

10 oct. 2019 at 17:00 (BST)

'Agents d''expédition'

Sous-traitants pour le stockage

Lots 1-10 de 107

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Fin:
25 sept. 2019 16:20:00 BST
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
10
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 100: Doosan Puma 500 CNC Lathe

Doosan Puma 500 CNC Lathe with Fanuc Series 21i – TB Control, 630mm 4 Jaw Chuck, 12 Station Turret, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooling, Qty of Jaws. S/No. PM450518 (05/2008)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of Lots 100 & 100A

Preview image
Fin:
25 sept. 2019 16:20:00 BST
Temps restant:
Enchère terminée
Augmentation:
€25
Enchères:
7
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 100A: 7 Drawer Cabinet

7 Drawer Cabinet with Qty of Carbide Tips, Boring Bars and Sleeves Suitable for Doosan Puma 

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of Lots 100 & 100A

Preview image
Fin:
25 sept. 2019 16:20:00 BST
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
67
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot *: Combination of Lots 100 & 100A

Combination of Lots 100 & 100A

100 - Doosan Puma 500 CNC Lathe with Fanuc Series 21i – TB Control, 630mm 4 Jaw Chuck, 12 Station Turret, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooling, Qty of Jaws. S/No. PM450518 (05/2008)

and

7 Drawer Cabinet with Qty of Carbide Tips, Boring Bars and Sleeves Suitable for Doosan Puma 

Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Lots de cette offre combinée

N° de lot Description
Preview image
Fin:
25 sept. 2019 16:40:00 BST
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
5
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 101: Puma 500 CNC Lathe

Puma 500 CNC Lathe with Fanuc Series 18i – T Control, 450mm 3 Jaw Chuck, Hydraulic Steady, 12 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PM450329 (03/2001)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 101 & 101A

Preview image
Fin:
25 sept. 2019 16:40:00 BST
Temps restant:
Enchère terminée
Augmentation:
€25
Enchères:
2
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 101A: 2 Door Cabinet with Boring Bars

2 Door Cabinet with Boring Bars, Carbide Tip Holders, Cutters, Centre Drills and Sleeves suitable for Puma 500 CNC Lathe

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 101 & 101A

Preview image
Fin:
25 sept. 2019 16:40:00 BST
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
47
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot *: Combination of lots 101 & 101A

Combination of Lots 101 & 101A

101 - Puma 500 CNC Lathe with Fanuc Series 18i – T Control, 450mm 3 Jaw Chuck, Hydraulic Steady, 12 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PM450329 (03/2001)

and

101A - 2 Door Cabinet with Boring Bars, Carbide Tip Holders, Cutters, Centre Drills and Sleeves suitable for Puma 500 CNC Lathe

Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Lots de cette offre combinée

N° de lot Description
Preview image
Fin:
25 sept. 2019 16:30:00 BST
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
6
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 102: Puma 450 CNC Lathe

Puma 450 CNC Lathe with Fanuc Series 18 – T Control, 450mm 3 Jaw Chuck, 12 Station Turret with Tooling, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooleye, Tooling. S/No. PM450282 (11/1999)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of Lots 102 & 102A

Preview image
Fin:
25 sept. 2019 16:30:00 BST
Temps restant:
Enchère terminée
Augmentation:
€25
Enchères:
3
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 102A: 8 Drawer Cabinet

8 Drawer Cabinet with Carbide Tips, Sleeves, Taps, Cutters and Jaws for Doosan Puma

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of Lots 102 & 102A

Preview image
Fin:
25 sept. 2019 16:30:00 BST
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
34
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot *: Combination of Lots 102 & 102A

Combination of Lots 102 & 102A

102 - Puma 450 CNC Lathe with Fanuc Series 18 – T Control, 450mm 3 Jaw Chuck, 12 Station Turret with Tooling, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooleye, Tooling. S/No. PM450282 (11/1999)

102A - 8 Drawer Cabinet with Carbide Tips, Sleeves for Doosan, Taps, Cutters, Jaws

Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Lots de cette offre combinée

N° de lot Description
Preview image
Fin:
25 sept. 2019 16:50:00 BST
Temps restant:
Enchère terminée
Augmentation:
€250
Enchères:
6
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 103: Daewoo Puma 12L-B CNC Lathe

Daewoo Puma 12L-B CNC Lathe with Fanuc Series O-T Control, 300mm 3 Jaw Chuck, 10 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PL121180 (04/1997)

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of Lots 103 & 103A

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Catégories