2814 - Doosan Puma, Daewoo, Leadwell Lathes and Machining Centres, Mills, Drills and Grinders no longer required by Omal Srl Italy
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Banzi PZ, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com or our Italian Office on: + 39 0732 677063 info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 107
Lot 103A: 7 Drawer Cabinet
7 Drawer Cabinet with Carbide Tips, Sleeves Suitable for Doosan Puma
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 103 & 103A
Combination of Lots 103 & 103A
103 Daewoo Puma 12L-B CNC Lathe with Fanuc Series O-T Control, 300mm 3 Jaw Chuck, 10 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PL121180 (04/1997)
103A 7 Drawer Cabinet with Carbide Tips, Sleeves Suitable for Doosan
Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
103 | Daewoo Puma 12L-B CNC Lathe |
103A | 7 Drawer Cabinet |
Lot 104: Daewoo Ace Series HM800 CNC Horizontal Machining Centre
Daewoo Ace Series HM800 CNC Horizontal Machining Centre with Fanuc Series 18i – M Control, Twin 800mm Pallet Size, Swarf Conveyor, 40 Station Tool Changer, B Axis, CAT 50 Tooling, Fixtures 360mm x 360mm. S/No. HM80047 (2002)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 104A: Mobile Tooling Trolley
Mobile Tooling Trolley with Qty CAT 50 Tooling
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 104B: 7 Drawer Cabinet
7 Drawer Cabinet with Drills, Carbide Tips, Cutters, Taps and Collets
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 104C: Cabinet with 3 Drawers
Cabinet with 3 Drawers including Tips and 12 ACT 50 Tooling
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 104, 104A, 104B & 104C
Combination of Lots 104, 104A, 104B & 104C
104 - Daewoo Ace Series HM800 CNC Horizontal Machining Centre with Fanuc Series 18i – M Control, Twin 800mm Pallet Size, Swarf Conveyor, 40 Station Tool Changer, B Axis, CAT 50 Tooling, Fixtures 360mm x 360mm. S/No. HM80047 (2002)
104A - Mobile Tooling Trolley with Qty CAT 50 Tooling
104B - 7 Drawer Cabinet with Drills, Carbide Tips, Cutters, Taps and Collets
104C - Cabinet with 3 Drawers including Tips and 12 ACT 50 Tooling
Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
104 | Daewoo Ace Series HM800 CNC Horizontal Machining Centre |
104A | Mobile Tooling Trolley |
104B | 7 Drawer Cabinet |
104C | Cabinet with 3 Drawers |
Lot 105: Doosan Mynx 650/50 CNC Vertical Machining Centre
Doosan Mynx 650/50 CNC Vertical Machining Centre with Fanuc Series 21i-MB Control, Swarf Conveyor, 30 Station Tool Changer, 140mm x 650mm Table Size. S/No. AV630891 (09/2006)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 105A: Qty of CAT 50 Tooling
Qty of CAT 50 Tooling
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 105 & 105A
Combination of Lots 105 & 105A
105 - Doosan Mynx 650/50 CNC Vertical Machining Centre with Fanuc Series 21i-MB Control, Swarf Conveyor, 30 Station Tool Changer, 140mm x 650mm Table Size. S/No. AV630891 (09/2006)
and
105A - Qty of CAT 50 Tooling
Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
105 | Doosan Mynx 650/50 CNC Vertical Machining Centre |
105A | Qty of CAT 50 Tooling |