2814 - Doosan Puma, Daewoo, Leadwell Lathes and Machining Centres, Mills, Drills and Grinders no longer required by Omal Srl Italy
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Banzi PZ, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com or our Italian Office on: + 39 0732 677063 info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 107
Lot 106: Daewoo Mechatropia Ace-V600 CNC Vertical Machining Centre
Daewoo Mechatropia Ace-V600 CNC Vertical Machining Centre with Fanuc Series 18-M Control, Swarf Conveyor, 30 Station Tool Changer, 140mm x 700mm Table Size. S/No. AV650231 (2000)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 106A: Cabinet with CAT 50 Tooling
Cabinet with CAT 50 Tooling
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 106 & 106A
Combination of Lots 106 & 106A
106 - Daewoo Mechatropia Ace-V600 CNC Vertical Machining Centre with Fanuc Series 18-M Control, Swarf Conveyor, 30 Station Tool Changer, 140mm x 700mm Table Size. S/No. AV650231 (2000)
and
106A - Cabinet with CAT 50 Tooling
Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
106 | Daewoo Mechatropia Ace-V600 CNC Vertical Machining Centre |
106A | Cabinet with CAT 50 Tooling |
Lot 107: Leadwell MCV-760BP CNC Vertical Machining Centre
Leadwell MCV-760BP CNC Vertical Machining Centre with Fanuc Series O-M Control, 4th Axis Unit 270mm, Tailstock, 3 Jaw Chuck, 1000mm x 500mm Table Size. S/No. L1S1E 0830 (1995)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 108: Leadwell V-20 CNC Vertical Machining Centre
Leadwell V-20 CNC Vertical Machining Centre with Fanuc Series O-MD Control, 16 Station Tool Changer, 250mm 3 Jaw Chuck on Table, Table Size 600mm x 350mm, Qty of BT 40 Tooling. S/No. L2TJB0038 (06/2002)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 108A: Elbo PV2 Control Tool Setter
Elbo PV2 Control Tool Setter. S/No. 71122
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 108 & 108A
Combination of lots 108 & 108A
108 - Leadwell V-20 CNC Vertical Machining Centre with Fanuc Series O-MD Control, 16 Station Tool Changer, 250mm 3 Jaw Chuck on Table, Table Size 600mm x 350mm, QTY of BT 40 Tooling. S/No. L2TJB0038 (06/2002)
and
108A - Elbo PV2 Control Tool Setter. S/No. 71122
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
108 | Leadwell V-20 CNC Vertical Machining Centre |
108A | Elbo PV2 Control Tool Setter |
Lot 109: Tacchella Electra 1523-CNC Trade Grinder
Tacchella Electra 1523-CNC Trade Grinder with GE Fanuc Series 180-T Control 400mm Wheel Size, Tooling, 100mm 3 Jaw Steady, 150mm 3 Jaw Steady, 200mm 3 Jaw Steady, Filtration Unit. S/No. 6765 (2002)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 110: Grisetti Grinder
Grisetti Grinder, 160mm 3 Jaw Chuck, 200mm 3 Jaw Chuck Distance between Centres 1200mm, 320mm Wheel Size, Internal and External Grinding
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 111: Tur 630m Lathe
Tur 630m Lathe, 380mm 3 Jaw Chuck, Distance between Centres 2m, Quick Change Tooling, (2) 3 Point Steadies. S/No. 48982
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.