2716 - SNK Milling & Boring Machine, Machining & Turning Centres and Machine Tools no longer required by Kinetic Engineering Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 35
Los 100: SNK RB-2NM Bridge Type CNC Milling & Boring Machine
SNK RB-2NM Bridge Type CNC Milling & Boring Machine with Fanuc Control Series 18m, Vertical and Horizontal Heads, BT50 Tooling, 40atc, Table size 2.5m x 1.2m, Travel lengths X = 4350mm Y = 2000mm Z = 600mm W = 900mm. S/No. 99K1738 (1999)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 100A: BT50 Tooling
BT50 Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 100B: BT50 Tooling
BT50 Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 100C: BT50 Tooling
BT50 Tooling
Please Note: This lot is located in Worcester, unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 100D: BT50 Tooling
BT50 Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of lots 100, 100A, 100B, 100C, 100D
Combination of Lots 100, 100A, 100B, 100C, 100D
Lot 100 - SNK RB-2NM Bridge Machine with Fanuc Control Series 18m, Vertical and Horizontal Heads, BT50 Tooling, 40atc, Table size 2.5m x 1.2m, Travel lengths X = 4350mm Y = 2000mm Z = 600mm W = 900mm. S/No. 99K1738 (1999)
and
Lot 100A - BT50 Tooling
and
Lot 100B - BT50 Tooling
and
Lot 100C - BT50 Tooling
and
Lot 100D - BT50 Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
100 | SNK RB-2NM Bridge Type CNC Milling & Boring Machine |
100A | BT50 Tooling |
100B | BT50 Tooling |
100C | BT50 Tooling |
100D | BT50 Tooling |
Los 101: Auerbach FBE 1500 Milling Machine
Auerbach FBE 1500 Milling Machine with Heidenhain 407 Control, 4th Axis with 800mm Turntable, Table size 1.5m x 0.65m. S/No. 032 032 (1996)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 102: 72” Webster & Bennett CNC VTL Vertical Borer
72” Webster & Bennett CNC VTL Vertical Borer, Retro fitted CNC Fagor Control, 72” 4 Jaw Chuck . S/No. 602342 (1980)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 103: Cincinnati Arrow Series 2 1000 Machining Centre
Cincinnati Arrow Series 2 1000 Machining Centre with Heidenhain TNC 410ma Control, 21atc, Through Spindle Coolant. S/No. 7049-H00-KH1067
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 103A: Cincinnati Milacron CNC 15 4th Axis Unit
Cincinnati Milacron CNC 15 4th Axis Unit, 310mm Face Plate. S/No. 540
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.