2716 - SNK Milling & Boring Machine, Machining & Turning Centres and Machine Tools no longer required by Kinetic Engineering Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 35
Lot 100: SNK RB-2NM Bridge Type CNC Milling & Boring Machine
SNK RB-2NM Bridge Type CNC Milling & Boring Machine with Fanuc Control Series 18m, Vertical and Horizontal Heads, BT50 Tooling, 40atc, Table size 2.5m x 1.2m, Travel lengths X = 4350mm Y = 2000mm Z = 600mm W = 900mm. S/No. 99K1738 (1999)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 100A: BT50 Tooling
BT50 Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 100B: BT50 Tooling
BT50 Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 100C: BT50 Tooling
BT50 Tooling
Please Note: This lot is located in Worcester, unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 100D: BT50 Tooling
BT50 Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 100, 100A, 100B, 100C, 100D
Combination of Lots 100, 100A, 100B, 100C, 100D
Lot 100 - SNK RB-2NM Bridge Machine with Fanuc Control Series 18m, Vertical and Horizontal Heads, BT50 Tooling, 40atc, Table size 2.5m x 1.2m, Travel lengths X = 4350mm Y = 2000mm Z = 600mm W = 900mm. S/No. 99K1738 (1999)
and
Lot 100A - BT50 Tooling
and
Lot 100B - BT50 Tooling
and
Lot 100C - BT50 Tooling
and
Lot 100D - BT50 Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
100 | SNK RB-2NM Bridge Type CNC Milling & Boring Machine |
100A | BT50 Tooling |
100B | BT50 Tooling |
100C | BT50 Tooling |
100D | BT50 Tooling |
Lot 101: Auerbach FBE 1500 Milling Machine
Auerbach FBE 1500 Milling Machine with Heidenhain 407 Control, 4th Axis with 800mm Turntable, Table size 1.5m x 0.65m. S/No. 032 032 (1996)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 102: 72” Webster & Bennett CNC VTL Vertical Borer
72” Webster & Bennett CNC VTL Vertical Borer, Retro fitted CNC Fagor Control, 72” 4 Jaw Chuck . S/No. 602342 (1980)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 103: Cincinnati Arrow Series 2 1000 Machining Centre
Cincinnati Arrow Series 2 1000 Machining Centre with Heidenhain TNC 410ma Control, 21atc, Through Spindle Coolant. S/No. 7049-H00-KH1067
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 103A: Cincinnati Milacron CNC 15 4th Axis Unit
Cincinnati Milacron CNC 15 4th Axis Unit, 310mm Face Plate. S/No. 540
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.