2716 - SNK Milling & Boring Machine, Machining & Turning Centres and Machine Tools no longer required by Kinetic Engineering Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 21-30 von 35
Los *: Combination of lots 105, 105A, 105B
Combination of lots 105, 105A, 105B
Lot 105 - Cincinnati Milicron Arrow 500 Vertical Machining Centre with Heidenhain 410 Control, 21 atc, Table size 700mm x 520mm. S/No. 7042-HOA-RA-1682
and
Lot 105A - Cat 40 Tooling
and
Lot 105B - Cat 40 Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
105 | Cincinnati Milacron Arrow 500 Vertical Machining Centre |
105A | Cat40 Tooling |
105B | Cat40 Tooling |
Los 106: Doosan S550L Lathe
Doosan S550L Lathe with Fanuc Series 21i-TB Control, 3 Jaw Chuck 380mm, 12 Station Turret, Tailstock, Tooleye, Swarf Conveyor. S/No. LNR-1055 (2005)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 107: Doosan S280 Lathe
Doosan S280 Lathe with Fanuc Series Oi-T Control, 3 Jaw Chuck 310mm, 10 Station Turret, Tailstock, Tooleye, Parts Catcher, Samsys Magazine Barfeed. S/No. LNG1141
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 108: Colchester Tornado 200 Lathe
Colchester Tornado 200 Lathe S/No. C20374/336 (1996) with GE Fanuc Series O-T Control, 3 Jaw Chuck 210mm, 12 Station Turret, Tailstock, Swarf Conveyor, Hydrafeed HY Barfeed with a selection of Liners. S/No. 9280
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 109: Okuma & Howa ACT 3 Lathe
Okuma & Howa ACT 3 Lathe with Fanuc Series O-T Control, 3 Jaw Chuck 210mm, Tooleye, Tailstock, 12 Station Turret. S/No. 09655
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 110: Okuma & Howa ACT 4 Lathe
Okuma & Howa ACT 4 Lathe with Fanuc Series 15-T Control, 3 Jaw Chuck 300mm, 12 Station Turret, Tooleye, Tailstock. S/No. 01641
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 111: Colchester Electronic Mastiff Lathe
Colchester Electronic Mastiff Lathe with GE Fanuc Series 20-T Control, 2200mm between Centres, Gap Bed 660mm Faceplate, 3 Jaw Chuck 380mm, 4 Jaw Chuck 400mm, 3 Pont Steady, Quick Change Tooling. S/No. EM0150 (1999)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 112: Colchester Mastiff 1400 Lathe
Colchester Mastiff 1400 Lathe, 3 Jaw Chuck 310mm, 1600mm between Centres, Gap Bed, Quick Change Tooling, Newhall Dro, 3 Point Steady. S/No. 8/0203/06486DD
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 113: Bridgeport Series 1 Milling Machine
Bridgeport Series 1 Milling Machine, Heidenhain Dro, Table size 1220mm x 230mm with Horizontal Head. S/No. 053120493
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 114: Moore Jig Grinder Model No. 2
Moore Jig Grinder Model No. 2, Table size 19” x 10”, Anilam 411 Wizard Dro. S/No. 7125
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.