2823 - Hurco Vertical Machining Centres, Sodick & Agie EDM'S, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Cannock

Engineering

Auktion endet am

Mittwoch 16 Okt 2019 at 03:00PM (BST)
Zum Kalender hinzufügen

Verbleibende Zeit

Gebotsfristverlängerung

Artikelbeschreibung

Location: These lots are located in Cannock.  Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lot 107A however is located in Birmingham.

Buyer's premium

Es gilt ein Aufgeld von 16 %.

Mehrwertsteuer

Zzgl. Mehrwertsteuer in Höhe von 20 %.

Seitenaufrufe

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Bitte markieren Sie das nachfolgende Kästchen und klicken Sie auf ”Bestätigen“.


* Bitte beachten Sie: Die Genauigkeit der per Google Translate erstellten Übersetzungen kann nicht garantiert werden. Diese Übersetzungen dienen nur zu Informationszwecken. Die englische Beschreibung der Lose hat Vorrang und wurde nach bestem Wissen des Versteigerers erstellt. Für deren Richtigkeit kann jedoch keine Garantie übernommen. Es obliegt dem Käufer, die Richtigkeit der Beschreibung vor Gebotsabgabe zu überprüften.

Hinweis für die Käufer

Datum der letzten Zahlung

18 Okt 2019 at 17:00 (BST)

Endgültiges Freigabedatum

31 Okt 2019 at 17:00 (GMT)

Versandunternehmen

Lagerfirma

Lose 1-10 von 81

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Endet:
16 Okt 2019 16:20:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£250
Gebote:
4
Aufgeld:
16%
MwSt-Satz:
20%

Los 100: Hurco VMX 30 Vertical Machining Centre

Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of Lots 100 & 100A

Preview image
Endet:
16 Okt 2019 16:20:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£25
Gebote:
2
Aufgeld:
16%
MwSt-Satz:
20%

Los 100A: Qty of CAT40 Tool Holders

Qty of CAT40 Tool Holders and Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of Lots 100 & 100A

Preview image
Endet:
16 Okt 2019 16:20:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£250
Gebote:
15
Aufgeld:
16%
MwSt-Satz:
20%

Los *: Combination of Lots 100 & 100A

Combination of Lots 100 & 100A

Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

and

Qty of CAT40 Tool Holders, Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lose in dieser Kombination

Losnummer Beschreibung
Preview image
Endet:
16 Okt 2019 16:30:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£250
Gebote:
9
Aufgeld:
16%
MwSt-Satz:
20%

Los 101: Hurco VSX24 Vertical Machining Centre

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of Lots 101 & 101A

Preview image
Endet:
16 Okt 2019 16:30:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£25
Gebote:
2
Aufgeld:
16%
MwSt-Satz:
20%

Los 101A: Qty of CAT40 Tool Holders and Collets

Qty of CAT40 Tool Holders and Collets

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird

*: Combination of Lots 101 & 101A

Preview image
Endet:
16 Okt 2019 16:30:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£250
Gebote:
12
Aufgeld:
16%
MwSt-Satz:
20%

Los *: Combination of Lots 101 & 101A

Combination of Lots 101 & 101A

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

and

Qty of CAT40 Tool Holders and Collets

Please Note: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Endet:
16 Okt 2019 15:30:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£500
Gebote:
30
Aufgeld:
16%
MwSt-Satz:
20%

Los 102: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 1625

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Endet:
16 Okt 2019 15:30:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£500
Gebote:
30
Aufgeld:
16%
MwSt-Satz:
20%

Los 103: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0167

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Endet:
16 Okt 2019 15:50:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£500
Gebote:
20
Aufgeld:
16%
MwSt-Satz:
20%

Los 104: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0168

Please Note: For Spares and Repairs

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Endet:
16 Okt 2019 16:00:00 BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung:
£500
Gebote:
24
Aufgeld:
16%
MwSt-Satz:
20%

Los 105: Sodick AM3L Die Sink

Sodick AM3L Die Sink with Sodick LN1 Control, 4 Automatic Tool Changer, 3R Tooling, Table Size 600mm x 400mm. S/No. 0070 (2002)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Kategorien