2823 - Hurco Vertical Machining Centres, Sodick & Agie EDM'S, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Cannock
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 107A however is located in Birmingham.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 81
Lot 100: Hurco VMX 30 Vertical Machining Centre
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 100A: Qty of CAT40 Tool Holders
Qty of CAT40 Tool Holders and Collets and Bench
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 100 & 100A
Combination of Lots 100 & 100A
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
and
Qty of CAT40 Tool Holders, Collets and Bench
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
100 | Hurco VMX 30 Vertical Machining Centre |
100A | Qty of CAT40 Tool Holders |
Lot 101: Hurco VSX24 Vertical Machining Centre
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 101A: Qty of CAT40 Tool Holders and Collets
Qty of CAT40 Tool Holders and Collets
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 101 & 101A
Combination of Lots 101 & 101A
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
and
Qty of CAT40 Tool Holders and Collets
Please Note: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
101 | Hurco VSX24 Vertical Machining Centre |
101A | Qty of CAT40 Tool Holders and Collets |
Lot 102: Sodick AQ325L Wire Eroder
Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 1625
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 103: Sodick AQ325L Wire Eroder
Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0167
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 104: Sodick AQ325L Wire Eroder
Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0168
Please Note: For Spares and Repairs
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 105: Sodick AM3L Die Sink
Sodick AM3L Die Sink with Sodick LN1 Control, 4 Automatic Tool Changer, 3R Tooling, Table Size 600mm x 400mm. S/No. 0070 (2002)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.