2685 - Bandera Plastic Extrusion, Clever Shrink Sleaving, Amut & Illig Thermoforming, OMSO & Van Dam Printing previously used in the production of Disposable Cups & Containers for Theca Srl Turate (Co) Italy
In Zusammenarbeit mit
Miscellaneous
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Turate, Italy. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 22.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer. Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 41-50 von 139
Los 132A: Quantity of Container Holders for Printing Machine
Quantity of Container Holders for Printing Machine
Please Note: This lot is located in Turate, Italy.
Unfortunately, there are no loading facilities available on site.
Dismantling and loading will be at the cost of the purchaser.
Los 133: Custom Built Stacker Delivery Unit
Custom Built Stacker Delivery Unit
Please Note: This lot is located in Turate, Italy.
Unfortunately, there are no loading facilities available on site.
Dismantling and loading will be at the cost of the purchaser.
Los 134: Custom Built Stacker Delivery Unit
Custom Built Stacker Delivery Unit
Please Note: This lot is located in Turate, Italy.
Unfortunately, there are no loading facilities available on site.
Dismantling and loading will be at the cost of the purchaser.
Los 135: Custom Built Semi-Automatic Stacker
Custom Built Semi-Automatic Stacker
Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.
Los 136: Custom Built Semi-Automatic Stacker
Custom Built Semi-Automatic Stacker
Please Note: This lot is located in Turate, Italy.
Unfortunately, there are no loading facilities available on site.
Dismantling and loading will be at the cost of the purchaser.
Los 137: Plastic Sheet Extrusion Line
Plastic Sheet Extrusion Line comprising: BANDERA diam. 120mm
Extruder S/No. 16537 (1993) with Hopper Loader, Bandera diam. 80mm
Extruder S/No. 16536 (1993) with Hopper Loader, Bandera diam. 60mm
Extruder S/No. 70373 (1993), 5 Cylinder Water Chilled Calendar with
R. SELLA & C. Chiller A3 S/No. 932021, Slitting Unit with set
of knives, 2 MECCANOPLASTICA 180 5LT 3L Granulator, Infeed 180mm,
BANDERA Rewind Stands, Main Control Panel
Please Note: This lot is located in Turate, Italy.
Unfortunately, there are no loading facilities available on site.
Dismantling and loading will be at the cost of the purchaser.
Los 138: Plastic Sheet Extrusion Line
Plastic Sheet Extrusion Line Comprising: Bandera Extruder (1983)
with Hopper Loader and Control Panel, Bandera Extruder with Hopper
Loader and Control Panel, AMUT BA 100 S/No. 06E3003M (2006) with
AMUT BA 100 - Extruder, Hopper Loader and Control
Panel, 5 Cylinder Water Chilled Calendar SELLA Chiller A3A S/No.
06E3003M (2006), Slitter Unit with Waste Trim and MECCANOPLASTICA
MBM 18 402 TR12 Granulator (2008), Rewind Stands
Please Note: This lot is located in Turate, Italy.
Unfortunately, there are no loading facilities available on site.
Dismantling and loading will be at the cost of the purchaser.
Los 139: Mixing Extruding and Re-granulating Line
Mixing Extruding and Re-granulating Line comprising: AMUT diam.
80 Extruder with Stainless Steel Water Trough and Granulator
Please Note: This lot is located in Turate, Italy.
Unfortunately, there are no loading facilities available on site.
Dismantling and loading will be at the cost of the purchaser.
Los 142: Extruding and Thermoforming Line
Extruding and Thermoforming Line Comprising: Bandera diam. 45mm
Extruder (1971) with Hopper Loader, Thermoformer with Cut off and
Granulator for Spares
Please Note: This lot is located in Turate, Italy.
Unfortunately, there are no loading facilities available on site.
Dismantling and loading will be at the cost of the purchaser.
Los 143: Extruding and Thermoforming Line
Extruding and Thermoforming Line Comprising: Bandera diam. 60mm
Extruder (1969) with Hopper Loader, Bandera diam. 45mm Extruder
(1961) with Hopper Loader, Thermoformer with Cut off and Granulator
Please Note: This lot is located in Turate, Italy.
Unfortunately, there are no loading facilities available on site.
Dismantling and loading will be at the cost of the purchaser.