Please Note: These lots are located in Turate, Italy. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.

Clever Sleeving Line comprising: Vertical Cups Loader, 2 Portable Double Sleeve Reel Storage Units, Clever GSD 422 Sleeve Applicator S/No. 0008 with PLC Display, Clever STJ3 1 Air Steam Shrinking Tunnel S/No. 0005 with PLC Display Clever IMP 300, Stacking Cup unloader S/No. 0004 Line Built 2011

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

AMUT AMP 850 2F High Speed Fully Automatic Thermoforming Machine. S/No. V2344 AA (2006) with Siemens SIMATIC Touch Panel, Mould with 45 Cavities, Stacker, Piece Counter and Delivery Conveyor, Theoretical Capacity 60000 pz/h with 45 Prints Mould (Includes Spare Moulds)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

TRIA Traino/DP-SL Granulator S/No. 33207624 (2006) 900mm Opening

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Combination of lots 101 & 102

AMUT AMP 850 2F High Speed Fully Automatic Thermoforming Machine S/No: V2344 AA, (2006) with Siemens SIMATIC Touch Panel, Mould with 45 Cavities, Stacker, Piece Counter and Delivery Conveyor, Theoretical capacity 60000 pz/h with 45 Prints Mould

and

TRIA Traino/DP-SL Granulator S/No: 33207624 (2006) working width 900mm

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

ILLIG RDM 70k Automatic Pressure Forming Machine S/No. 139 (1988) with ELM 40 Ultrasound Welder, Forming Area 680 x 300mm, Control Panel, Reel Feed (Includes Spare Moulds)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

MECCANOPLASTICA 900T Granulator. S/No: 14298 (1998) 900mm Opening

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

OMSO HERGO 8 Colour Dry Offset Cup Printing Machine, S/No. 208 0103 01 8 (2002) with UV Dryer, Siemens SIMATIC Touch Panel, Infeed Elevator and Restacking System (Includes Spare Moulds)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser

Combination of lots 103, 104, & 105

ILLIG Type RDM 70k Automatic Pressure Forming Machine S/No: 139 (1988) with ELM 40 Ultrasound Welder, Forming Area 680 x 280mm, Control Panel, Reel Feed

and

MECCANOPLASTICA 900T Granulator, S/No: 14298 (1998), 900mm Opening

and

OMSO HERGO Colour Dry Offset Cup Printing Machine S/No. 208 0103 01, 8 (2002) with UV Dryer, Siemens SIMATIC Touch Panel, Infeed Elevator and Restacking System

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

ILLIG RDM 70K Automatic Pressure Forming Machine S/No. 188 (1991) forming area 680mm x 300mm and Control Panel with  VHW/72 Preheater. S/No. 322 (1991), Reel Feed

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

TRIA 900/TR-NS Granulator S/No. 33 517691, 900mm Opening

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Product Elevator with Overhead Delivery System

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

VAN DAM 565 MTO/UV 6 Color Dry Offset Cup Printing Machine. S/No. S16428-5 (1999)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Custom Built Stacker Delivery Unit

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

VAN DAM 565 MTO/UV 6 Colour Dry Offset Cup Printing Machine. S/No. S164428-6 (1999)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

VAN DAM Stacker Delivery Unit

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Combination of lots 106, 107, 108,109, 110, 111, 112

ILLIG RDM 70K Automatic Pressure Forming Machine. S/No: 188 (1991) with Preheater VHW/72 S/No: 322 (1991), Reel Feed

and

TRIA type 900/TR-NS Granulator. S/No: 33 517691, 900mm Opening

and

Product Elevator with Overhead Delivery System

and

VAN DAM 565 MTO/UV, 6 Color Dry Offset Cup Printing Machine. S/No: S16428-5 (1999)

and

Custom Built Stacker Delivery Unit

and

VAN DAM type 565 MTO/UV 6 Colour Dry Offset Cup Printing Machine. S/No: S164428-6 (1999)

and

VAN DAM Stacker Delivery Unit

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Tool Setter for VAN DAM Printers

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

ILLIG RDM 70K Automatic Pressure Forming Machine S/No. 154 (1988) Forming Area 680mm x 300mm and Control Panel, Reel Feed (Includes Spare Moulds)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

TRIA 900 TR-NS Granulator S/No. 133.2006.89, 900mm opening

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

BRENNER Product Elevator with Overhead Delivery System

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

VAN DAM 560UV 6 Colour Dry Offset Cup Printing Machine. S/No. S 34.4.436-6

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Quantity of Container Holders for Printing Machine

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

VAN DAM Stacker Delivery Unit

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

VAN DAM 560UV 6 Colour Dry Offset Cup Printing Machine S/No: S 03.03.7-6

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Custom Built Stacker Delivery Unit

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Combination of lots 113, 114, 115, 116, 116A, 117, 118 & 119

ILLIG RDM 70K Automatic Pressure Forming Machine S/No.: 154 (1988), Reel Feed

and

TRIA 900 TR-NS Granulator S/No: 133.2006.89, 900mm opening

and

BRENNER Product Elevator with Overhead Delivery System

and

VAN DAM 560UV, 6 Colour Dry Offset Cup Printing Machine S/No: S 34.4.436-6

and

Quantity of Container Holders for Printing Machine

and

VAN DAM Stacker Delivery Unit

and

VAN DAM 560UV 6 Colour Dry Offset Cup Printing Machine S/No: S 03.03.7-6

and

Custom Built Stacker Delivery Unit

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

DPM TERMOFORMATRICE Thermoforming Machine S/No. 001383 (1996)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

MECCANOPLASTICA 900 T Granulator S/No. 13496 (1996) 900mm opening 

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Combination of lots 120 & 121 

DPM TERMOFORMATRICE Thermoforming Machine S/No: 001383 (1996)

and

MECCANOPLASTICA 900 T Granulator S/No: 13496 (1996)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

ILLIG RDM 63/10 Thermoforming Machine S/No. 494 (1978) Forming Area 650mm x 300mm, Refurbished in 1998 by ASSIMPLAST

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

MECANOPLASTICA 900 T Granulator S/No. 14398 (1998) 900mm Opening 

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Combination of lots 122 & 123

ILLIG RDM 63/10 Thermoforming Machine S/No: 494 (1978) Refurbished in 1998 by ASSIMPLAST

and

MECANOPLASTICA 900 T Granulator S/No: 14398 (1998)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

ILLIG - ASSIMPLAST Thermoforming Machine

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

MECCANOPLASTICA 900 T Granulator (1998) 900mm Opening (Refurbished) 

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Combination of lots 124 & 125

ILLIG - ASSIMPLAST Thermoforming Machine

and

MECCANOPLASTICA 900 T Granulator (1998) Refurbished

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

ILLIG RDM 63/10B Thermoforming Machine S/No. 112 (1976) Forming Area 650 x 300mm

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

MECCANOPLASTICA 900 T Granulator S/No. 14498 (1998) 900mm Opening 

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Combination of lots 126 & 127

ILLIG RDM 63/10B Thermoforming Machine S/No: 112 (1976)

and

MECCANOPLASTICA 900 T Granulator S/No: 14498 (1998)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

OMSO DM55/5UV, 6 Colour Dry Offset Printing Machine S/No: F212 (1989) with UV Dryer, Integrated Delivery Stacker Unit

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

OMSO DM55, 6 Colour Dry Offset Printing Machine with Drying Tunnel and Delivery Conveyors

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Quantity of Container Holders for Printing Machine

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Custom Built Stacker Delivery Unit

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Custom Built Stacker Delivery Unit

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Custom Built Semi-Automatic Stacker

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Custom Built Semi-Automatic Stacker

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Plastic Sheet Extrusion Line comprising: BANDERA diam. 120mm Extruder S/No. 16537 (1993) with Hopper Loader, Bandera diam. 80mm Extruder S/No. 16536 (1993) with Hopper Loader, Bandera diam. 60mm Extruder S/No. 70373 (1993), 5 Cylinder Water Chilled Calendar with R. SELLA & C. Chiller A3 S/No. 932021, Slitting Unit with set of knives, 2 MECCANOPLASTICA 180 5LT 3L Granulator, Infeed 180mm, BANDERA Rewind Stands, Main Control Panel

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Plastic Sheet Extrusion Line Comprising: Bandera Extruder (1983) with Hopper Loader and Control Panel, Bandera Extruder with Hopper Loader and Control Panel, AMUT BA 100 S/No. 06E3003M (2006) with AMUT BA 100 - Extruder,   Hopper Loader and Control Panel, 5 Cylinder Water Chilled Calendar SELLA Chiller A3A S/No. 06E3003M (2006), Slitter Unit with Waste Trim and MECCANOPLASTICA MBM 18 402 TR12 Granulator (2008), Rewind Stands

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Mixing Extruding and Re-granulating Line comprising: AMUT diam. 80 Extruder with Stainless Steel Water Trough and Granulator

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Extruding and Thermoforming Line Comprising: Bandera diam. 45mm Extruder (1971) with Hopper Loader, Thermoformer with Cut off and Granulator for Spares

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Extruding and Thermoforming Line Comprising: Bandera diam. 60mm Extruder (1969) with Hopper Loader, Bandera diam. 45mm Extruder (1961) with Hopper Loader, Thermoformer with Cut off and Granulator

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Extruding Line Comprising: Bandera Extruder (1966) with Hopper Loader, AMUT EA 86 S/No. V2821 Extruder (2007) with Hopper Loader, TECNOVA ES35N-22D S/No. 047-96 (1996) with Hopper Loader

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Extruding and Thermoforming Line Comprising: Bandera Extruder (1973) with Hopper Loader, TECNOVA ES30N/25D Extruder S/No. 95/87 with Hopper Loader, Thermoformer with Cut Off and Granulator

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

ERG SM8 Dual Carton Tape and Cut Machine. S/No. 9044 (1989) with Flexible Infeed Conveyor and GRANDUS Welder

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

ERG SM8 Carton Tape and Cut Machine. S/No. 17261 (1991)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

ERG SM8 Carton Tape and Cut Machine S/No. 17260 (1991)

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Mobile Winder Units

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Mobile Winder Units

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

Mobile Winder Units

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

(4) Mobile Winder Units

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.

(4) Mobile Winder Units

Please Note: This lot is located in Turate, Italy. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser.