100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling, Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector, Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Operator Control Panel, Scraven 100-Ton Anvil Bumper with 13m Through-Feed Roller Table, Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener for up to 4” Square, 7” Flat, 4”Hex, Main Motor 224 KW, 460 Volt, 1130 RPM; Individual Vertical Motorized Adjustment; Roll Centers Adjustable; with 10M Bundler Accumulator Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Pangborn 4 Wheel 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Open Control Panel

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Scraven 100-Ton Anvil Bumper with 13m Through-Feed Roller Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener for up to 4” Square, 7” Flat, 4” Hex, Main Motor 224 KW, 460 Volt, 1130 RPM; Individual Vertical Motorized Adjustment; Roll Centers Adjustable; with 10M Bundler Accumulator Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

60 Ton Platt/Mair Bar Draw Bench, Single Chain, Single, Double & Triple Draw; Built-In Mair Push Pointer, Max. Length of Draw 9m; Main DC Motor 315 Kw, 500 Volt, 1460/1611RPM, Max Draw Diameter 4” Round, Spare Die Blocks, Spare Carriage-single and triple draw; Feed Table, Exit Transfer Conveyor, In-Line 4-Saw Mair Indexing Cut-to-Length System and accumulation table (1989), Tilghman Wheelabrator Through-Feed Shot Blast Chamber (1995), (4) Wheel 11kW Motors, Shot Blast Cabinet with Entry and Exit Skewed 48” Roller Conveyor for 2 bar handling, Dust Collector, Operator Control Panel, Infeed/Outfeed Transfer Tables, Bronx Model PBRV 6, 2 Roll/Twin Motor Bar Straightener (2 x Sets Spare Rolls), Capacity 4” Dia Round MS, 3” Dia Hexagonal SS, Rolls 18” Dia x 26” Length; (2) 59.7Kw Motors; Spare Roll; Entry& Exit Protective Heavy Duty Tables, Transfer Conveyors, Spare Carriages & Tooling

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tilghman Wheelabrator Through-Feed Shot Blast Chamber (1995), (4) Wheel 11kW Motors, Shot Blast Cabinet with Entry and Exit Skewed 48” Roller Conveyor for 2 bar handling, Dust Collector, Operator Control Panel, Infeed/Outfeed Transfer Tables

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

60 Ton Platt/Mair Bar Draw Bench, Single Chain, Single, Double & Triple Draw; Built-In Mair Push Pointer, Max. Length of Draw 9m; Main DC Motor 315 Kw, 500 Volt, 1460/1611RPM, Max Draw Diameter 4” Round, Spare Die Blocks, Spare Carriage-single and triple draw; Feed Table, Exit Transfer Conveyor, In-Line 4-Saw Mair Indexing Cut-to-Length System and accumulation table (1989)

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

4 x Mair Splitting Saws (1989), Operator Control Panel, Infeed/Outfeed Transfer Tables

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.