2280 - Stretch Forming, Chemical Etching, Alocrom & Anodising Lines, Heat Treatment and Paint Plants previously used by Aeroform Industries Ltd (previously known as BHW Components Ltd) in the Manufacture of Aerostructures & Aerospace Components

Loire 4m Stretch Former S/No. 88509 (1985) with:-
3m Pit Mount Unit
2-3 axis End Stations/Carriage
1 Axis Centre Form Unit
Bebr Travelling Crane
Loire Fekd 200-400 Hydraulic Push Down Unit (100 Ton)
Control Bench with Sinumerik 840D PLC (2000) S/No. 99106
Advised Capacity 350 Ton (1.2m x 4m 5mm)
All Controls, Associated Services, Change Parts and Tooling

Please Note: These Items are located in Wigan

Sheridan TC1000 Ton Stretch Former S/No. 01110 (2002) with:-
7m Pit Mounted Unit
2-4.3m 2 Axis End Stations/Carriages
1- Single Axis Form Station (4.3m)
Control Panel with Siemens Sinumerik 840D Control
Specification: Die Table Stroke: 2.1m, Max Jaw Distance: 6m, Swing: 15-90 Degrees.
All Controls, Associated Services, Change Parts and Tooling.

Please Note: These Items are located in Wigan

TW & CB Sheridan Stretch Forming Machine S/No. 64 with:-
Floor Mounted Unit
2-3 Axis End Stations/Carriage (1.6m)
1 Single Form Station (2m)
Max Thickness 5mm
All Controls, Associated Services, Change Parts and Tooling

Please Note: This Item is located in Wigan

Erco Stretch Form Machine with:-

500mm Pit Mounted Unit
2-3 Axis End Stations/Carriage (2.5m)
1 Single Axis Form Station (2.5m)
Control Bench, All Controls, Associated Services, Change Parts and Tooling

Please Note: This Item is located in Wigan

John Shaw & Sons 8000-Ton Capacity 6 Column Vertical Rubber Press , Ref Num 189 with Twin Shuttle Tables (Approx. 3.5’ x 8’), Control Systems, Berry Electrical Control Panel, Hydraulic Systems & Staging

Please Note: This Item is located in Wigan

Hydrapower Alocrom Plant Including:-

Approx. 3m x 750mm Single Tank x Approx 1.6m
Overhead Travelling Gantry
Tank No 1 – Alkali Clean
Tank No 2 – Rinse
Tank No 3 – Rinse
Tank No 4 – Deoxidiser
Tank No 5 – Rinse
Tank No 6 – Rinse
Tank No 7 – Alocrom
Tank No 8 – Rinse
Tank No 9 – Rinse
Gas Fired Oven
All Controls, Quantity of Trolleys

Please Note: These Items are located in Wigan

Hydrapower Etch Plant Including:-

Approx. 3m x 600mm single tank x approx. 1.6m

Overhead Travelling Gantry
Tank No 1 – Etch
Tank No 2 – Rinse
Tank No 3 – Rinse
Tank No 4 - Alkali Clean
Tank No 5 – Rinse
Tank No 6 – Rinse
Tank No 7 – Deoxidiser
Tank No 8 – Rinse
Tank No 9 – Rinse
Gas Fired Oven
All Controls, Quantity of Trolleys

Please Note: These Items are located in Wigan

Effluent Plant Serving Lots 113 and 114 Including:-

Treatment and Settlement Tanks
Pipework
Valves
Pumps
Control System

Please Note:- These Items are located in Wigan

Chemical Etching Line with RSJ supporting Steel Work with 4 Chain Blocks and Controls, Approx. 5m x 1.5m x 2.2m

Tank No 1 – Sodium Hydroxide
Tank No 2 – Rinse
Tank No 3 – TriAcid
Tank No 4 – Rinse
Tank No 5 – Rinse
Tank No 6 – Hot Etch
Tank No 7 – Tri Acid Deoxidiser
Tank No 8 – Water Rinse
Tank No 9 – Turco (50’)

Please Note: This Item is located in Wigan

Freestanding Spray Booth with Graco Spray Equipment Extraction & Controls, Approx. 4m x 3.5m

Please Note: This Item is located in Wigan