2727 - SMF, Mag Plastic & AOKI Blow Moulding Machines & Ancillary Equipment previously used in the Manufacturing of Detergent & Soap Bottles by Pizzolotto Detersivi dal 1919 srl, Belluno, Italy, Phase 2
En collaboration avec
Miscellaneous
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer. Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 36
Lot *: Combination of lots 8 & 8A
Combination of lots 8 & 8A
AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. 9350090 (1993) with Control Panel, Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for AOKI Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3630
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 8 | AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine |
| 8A | Moulds for AOKI Machine |
Lot 16: Spare Clamp suitable for TECHNE 15000S Blow Moulding Machines
Spare Clamp suitable for TECHNE 15000S Blow Moulding Machines
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €30
Lot 17: AUTOMA FLUS PACK 850/2V Blow Moulding Machine
AUTOMA FLUS PACK 850/2V Blow Moulding Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €430
Lot 18: MAGIC MG-L2ND Blow Moulding Machine
MAGIC MG-L2ND Blow Moulding Machine. S/No. 3-85 (1985)
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €430
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 18A: Various Tooling for AUTOMA and MAGIC MAX 3
Various Tooling for AUTOMA and MAGIC MAX 3
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €50
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 18 & 18A
Combination of lots 18 & 18A
MAGIC MG-L2ND Blow Moulding Machine. S/No. 3-85 (1985)
and
Various Tooling for AUTOMA and MAGIC MAX 3
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €480
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 18 | MAGIC MG-L2ND Blow Moulding Machine |
| 18A | Various Tooling for AUTOMA and MAGIC MAX 3 |
Lot 27: (3) Galvanised Containers
(3) Galvanised Containers dim. 110 X 110 X 160
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €30
Lot 65: 6 Section Bottle Storage and Delivery System
6 Section Bottle Storage and Delivery System with Vibrator and Control Panel
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site. Dismantling and Loading will be at the cost of the purchaser.
Lot 66: 7 Section Bottle Storage and Delivery System
7 Section Bottle Storage and Delivery System with Vibrator and Control Panel
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site. Dismantling and Loading will be at the cost of the purchaser.
Lot 67: 7 Section Bottle Storage and Delivery System
7 Section Bottle Storage and Delivery System with Conveyors and Control Panel
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site. Dismantling and Loading will be at the cost of the purchaser.