2727 - SMF, Mag Plastic & AOKI Blow Moulding Machines & Ancillary Equipment previously used in the Manufacturing of Detergent & Soap Bottles by Pizzolotto Detersivi dal 1919 srl, Belluno, Italy, Phase 2

En collaboration avec

2727 - Pizzolotto

Miscellaneous

'L''enchère se termine le'

mardi 20 nov. 2018 at 03:00PM (GMT)
Ajouter au calendrier

Temps restant

Temps écoulé

'Description de l''enchère'

Please Note: These lots are located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Buyer's premium

'La prime d''acheteur sera fixée à 16%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 22%.'

Temps de consultation

Viewing is available by appointment only with the Auctioneer. Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* 'Remarque: l''exactitude de toute traduction effectuée à l''aide de Google Translate n''est pas garantie. Une telle traduction n''est fournie qu''à titre indicatif. La description du lot en anglais est celle qui prévaut et repose sur les meilleures connaissances du commissaire des ventes. Toutefois, son exactitude n''est pas garantie et doit être vérifiée par l''acheteur avant l''enchère.'

Avis aux acheteurs

Date limite de paiement

22 nov. 2018 at 17:00 (GMT)

'Date limite d''apurement'

6 déc. 2018 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Lots 1-10 de 36

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Fin:
20 nov. 2018 15:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
18
'Prime d''acheteur:'
16%
Taux de TVA:
22%

Lot 1: SMF HIGH SPEED 3000 PET Blow Moulding Machine

SMF HIGH SPEED 3000 PET Blow Moulding Machine. S/No. 672 (2011) with Mitsubishi GOT1000 Control Panel, Preform Loader, Bottle Capacity: 0.25L – 2.5L, Bottle Dimensions: D max – 110mm H max - 350mm

Please Note: Green Blowers have been removed and not included in this lot.

Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.

The cost for Dismantling and Loading this item to a suitable vehicle is €500

 

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 1 & 1A

Preview image
Fin:
20 nov. 2018 15:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€250
Enchères:
3
'Prime d''acheteur:'
16%
Taux de TVA:
22%

Lot 1A: Rack Containing Moulds for SMF HIGH SPEED 3000

Rack Containing Moulds for SMF HIGH SPEED 3000

Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.

The cost for Dismantling and Loading this item to a suitable vehicle is €30

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 1 & 1A

Preview image
Fin:
20 nov. 2018 15:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
35
'Prime d''acheteur:'
16%
Taux de TVA:
22%

Lot *: Combination of lots 1 & 1A

Combination of lots 1 & 1A

SMF HIGH SPEED 3000 PET Blow Moulding Machine. S/No. 672 (2011) with Mitsubishi GOT1000 Control Panel, Preform Loader, Bottle Capacity: 0.25L – 2.5L, Bottle Dimensions: D max – 110mm H max - 350mm

Please Note: Green Blowers have been removed and not included in this lot.

and

Rack Containing Moulds for SMF HIGH SPEED 3000

Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.

The cost for Dismantling and Loading this item to a suitable vehicle is €530

Preview image
Fin:
20 nov. 2018 15:40:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€100
Enchères:
5
'Prime d''acheteur:'
16%
Taux de TVA:
22%

Lot 4A: Moulds for MAGIC Blow Moulders Machines (6) Pallets

Moulds for MAGIC Blow Moulders Machines (6) Pallets

Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.

The cost for Dismantling and Loading this item to a suitable vehicle is €60

Preview image
Fin:
20 nov. 2018 15:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
15
'Prime d''acheteur:'
16%
Taux de TVA:
22%

Lot 6: Mag Plastic SSB 20HP PET Injection Stretch Blow Moulding Machine

Mag Plastic SSB 20HP PET Stretch Blow Moulding Machine. S/No. 364 (1999) with Control Panel, Preform Loader, 2 Heads, Distance Between Heads 140mm, Clamping Force 140KN, 2200/2400 Pieces/Hour, Max Diameter - 115mm, Max H - 340mm, used to produce up to 1.25 Litre Bottles

Please Note: Green Blowers have been removed and not included in this lot.

Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.

The cost for Dismantling and Loading this item to a suitable vehicle is €650

 

 

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 6 & 6A

Preview image
Fin:
20 nov. 2018 15:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€250
Enchères:
3
'Prime d''acheteur:'
16%
Taux de TVA:
22%

Lot 6A: Rack Containing Moulds For Mag-Plastic Blow Molding Machine

Rack Containing Moulds For Mag-Plastic Blow Molding Machine

Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.

The cost for Dismantling and Loading this item to a suitable vehicle is €70

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 6 & 6A

Preview image
Fin:
20 nov. 2018 15:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
17
'Prime d''acheteur:'
16%
Taux de TVA:
22%

Lot *: Combination of lots 6 & 6A

Combination of lots 6 & 6A

Mag Plastic SSB 20HP PET Stretch Blow Moulding Machine. S/No. 364 (1999) with Control Panel, Preform Loader, 2 Heads, Distance Between Heads 140mm, Clamping Force 140KN, 2200/2400 Pieces/Hour, Max Diameter - 115mm, Max H - 340mm, used to produce up to 1.25 Litre Bottles

Please Note: Green Blowers have been removed and not included in this lot.

and

Rack Containing Moulds For Mag-Plastic Blow Molding Machine

Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.

The cost for Dismantling and Loading this item to a suitable vehicle is €720

Preview image
Fin:
20 nov. 2018 15:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
32
'Prime d''acheteur:'
16%
Taux de TVA:
22%

Lot 7: AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine

AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. SDLL0231 (2003) with Control Panel, Injection Clamping Force 720.7KN, Blow Clamping Force 646.2KN, Mag-plastics Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles

Please Note: Green Blowers have been removed and not included in this lot.

Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.

The cost for Dismantling and Loading this item to a suitable vehicle is €3600

 

Preview image
Fin:
20 nov. 2018 15:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€500
Enchères:
3
'Prime d''acheteur:'
16%
Taux de TVA:
22%

Lot 8: AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine

AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. 9350090 (1993) with Control Panel, Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles

Please Note: Green Blowers have been removed and not included in this lot.

Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.

The cost for Dismantling and Loading this item to a suitable vehicle is €3600

 

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 8 & 8A

Preview image
Fin:
20 nov. 2018 15:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€250
Enchères:
6
'Prime d''acheteur:'
16%
Taux de TVA:
22%

Lot 8A: Moulds for AOKI Machine

Moulds for AOKI Machine

Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.

The cost for Dismantling and Loading this item to a suitable vehicle is €30

 

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 8 & 8A

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Catégories