2727 - SMF, Mag Plastic & AOKI Blow Moulding Machines & Ancillary Equipment previously used in the Manufacturing of Detergent & Soap Bottles by Pizzolotto Detersivi dal 1919 srl, Belluno, Italy, Phase 2
Miscellaneous
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer. Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 36
Lot 1: SMF HIGH SPEED 3000 PET Blow Moulding Machine
SMF HIGH SPEED 3000 PET Blow Moulding Machine. S/No. 672 (2011) with Mitsubishi GOT1000 Control Panel, Preform Loader, Bottle Capacity: 0.25L – 2.5L, Bottle Dimensions: D max – 110mm H max - 350mm
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €500
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 1A: Rack Containing Moulds for SMF HIGH SPEED 3000
Rack Containing Moulds for SMF HIGH SPEED 3000
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €30
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 1 & 1A
Combination of lots 1 & 1A
SMF HIGH SPEED 3000 PET Blow Moulding Machine. S/No. 672 (2011) with Mitsubishi GOT1000 Control Panel, Preform Loader, Bottle Capacity: 0.25L – 2.5L, Bottle Dimensions: D max – 110mm H max - 350mm
Please Note: Green Blowers have been removed and not included in this lot.
and
Rack Containing Moulds for SMF HIGH SPEED 3000
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €530
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
1 | SMF HIGH SPEED 3000 PET Blow Moulding Machine |
1A | Rack Containing Moulds for SMF HIGH SPEED 3000 |
Lot 4A: Moulds for MAGIC Blow Moulders Machines (6) Pallets
Moulds for MAGIC Blow Moulders Machines (6) Pallets
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €60
Lot 6: Mag Plastic SSB 20HP PET Injection Stretch Blow Moulding Machine
Mag Plastic SSB 20HP PET Stretch Blow Moulding Machine. S/No. 364 (1999) with Control Panel, Preform Loader, 2 Heads, Distance Between Heads 140mm, Clamping Force 140KN, 2200/2400 Pieces/Hour, Max Diameter - 115mm, Max H - 340mm, used to produce up to 1.25 Litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €650
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 6A: Rack Containing Moulds For Mag-Plastic Blow Molding Machine
Rack Containing Moulds For Mag-Plastic Blow Molding Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €70
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 6 & 6A
Combination of lots 6 & 6A
Mag Plastic SSB 20HP PET Stretch Blow Moulding Machine. S/No. 364 (1999) with Control Panel, Preform Loader, 2 Heads, Distance Between Heads 140mm, Clamping Force 140KN, 2200/2400 Pieces/Hour, Max Diameter - 115mm, Max H - 340mm, used to produce up to 1.25 Litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Rack Containing Moulds For Mag-Plastic Blow Molding Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €720
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
6 | Mag Plastic SSB 20HP PET Injection Stretch Blow Moulding Machine |
6A | Rack Containing Moulds For Mag-Plastic Blow Molding Machine |
Lot 7: AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine
AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. SDLL0231 (2003) with Control Panel, Injection Clamping Force 720.7KN, Blow Clamping Force 646.2KN, Mag-plastics Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3600
Lot 8: AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine
AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. 9350090 (1993) with Control Panel, Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3600
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 8A: Moulds for AOKI Machine
Moulds for AOKI Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €30