2694 - A Large Range of Precision Plant Equipment available on the instruction of the new owners of Kilgour Aviation Ltd (In Administration) due to the closure of their Aviation Component Facility, Cleveleys, Lancashire
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: Majority of lots are located in Cleveleys. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lots 18 and 51 however are located in Birmingham. Please see individual lots for loading information.
The freehold property is also available for sale/lease and measures some 12000 sq.ft. The property has ample car parking and a large rear hard-standing area suitable for additional buildings or other external use. The whole site is freehold and is offered for sale with vacant possession and open to offers in excess of £400,000., or available leasehold on a 10 year lease with a 5 year revision and rent commencing at £48,000 per annum under full RICS terms. Please contact our office for further details: + 44 (0) 121 328 2424 or email: jenny.hobbins@cottandco.com
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only on 3rd & 4th September 2018. Possible subject to change. Please contact our Office on: +44 (0) 121 328 2424 and ask for Ari or email us at: info@cottandco.com ref Kilgour viewing.
Please Note upon viewings there will be no authorised operation of the machines.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 88
Lot 1: Mazak VTC 800/20SR 5 Axis Vertical Machining Centre
Mazak VTC 800/20SR 5 Axis Vertical Machining Centre with Mazatrol Matrix 2 CNC Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=2000mm Y=800mm Z=720mm B=222 Degrees (+ 111 To -111) C=360 Degrees (0.001) Din40 Spindle Taper, 48 Station ATC, Table Dimensions 2.5m x 820mm, C Axis 500mm Diameter, Through Spindle Coolant, Swarf Conveyor, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 247215 (2013)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1A: Mobile Trolley with Contents of CAT 40 Tooling
Mobile Trolley with Contents of CAT 40 Tooling
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1B: Aluminium Plate
Aluminium Plate suitable for Mazak VTC-800/20SR 2.1m x 840mm
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 1, 1A & 1B
Combination of Lots 1, 1A & 1B
Mazak VTC 800/20SR 5 Axis Machining Centre with Mazatrol Matrix 2 CNC Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=2000mm Y=800mm Z=720mm B=222 Degrees (+ 111 To -111) C=360 Degrees (0.001) Din40 Spindle Taper, 48 Station ATC, Table Dimensions 2500 x 800mm, C Axis 500mm Diameter, Through Spindle Coolant, Swarf Conveyor, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 247215 (2013)
and
Mobile Trolley with Contents of Machine Tooling
and
Aluminium Plate suitable for Mazak VTC-800/20SR 2.1m x 840mm
Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 1 | Mazak VTC 800/20SR 5 Axis Vertical Machining Centre |
| 1A | Mobile Trolley with Contents of CAT 40 Tooling |
| 1B | Aluminium Plate |
Lot 2: Mazak Variaxis 630-5X II 5 Axis Vertical Machining Center
Mazak Variaxis 630-5X II 5 Axis Vertical Machining Center with Mazatrol Matrix CNC Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=630mm Y=765mm Z=510mm A=150 Degrees (+30 to -120) C=360 Degrees (0.001) Din40 Spindle Taper, 40 Station ATC, Through Spindle Coolant, Swarf Conveyor, Renishaw Probe Interface, (Note No Probe) Swarf Bin, S/No. 188504 (06/2006)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2A: Rack of CAT 40 Tooling
Rack of CAT 40 Tooling, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 2 & 2A
Combination of Lots 2 & 2A
Mazak Variaxis 630-5X II 5 Axis Vertical Machining Center with Mazatrol Matrix CNC Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=630mm Y=765mm Z=510mm A=150 Degrees (+30 to -120) C=360 Degrees (0.001) Din40 Spindle Taper, 40 Station ATC, Through Spindle Coolant, Swarf Conveyor, Renishaw Probe Interface, (Note No Probe) Swarf Bin, S/No. 188504 (06/2006)
and
Rack of CAT 40 Tooling, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 2 | Mazak Variaxis 630-5X II 5 Axis Vertical Machining Center |
| 2A | Rack of CAT 40 Tooling |
Lot 3: Mazak Nexus VMC 510C 3 Axis Vertical Machining Centre
Mazak Nexus VMC 510C 3 Axis Vertical Machining Centre with Mazatrol 640m Nexus Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=1050mm Y=510mm Z=510mm 4th Axis 360 degrees, 4th Axis is a Kitagawa MR250RAE03 Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1300 x 550mm, Through Spindle Coolant, Swarf Conveyor, Tool Presetter, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 190152 (2006)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3A: Rack of CAT 40 Tooling
Rack of CAT 40 Tooling, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 3 & 3A
Combination of Lots 3 & 3A
Mazak Nexus VMC 510C 3 Axis Vertical Machining Center with Mazatrol 640m Nexus Control System, Maximum Spindle Speed 12000rpm, Axis Travels X=1050mm Y=510mm Z=510mm 4th Axis 360 degrees, 4th Axis is a Kitagawa MR250RAE03 Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1300 x 550mm, Through Spindle Coolant, Swarf Conveyor, Tool Presetter, Renishaw Probe Interface (Note No Probe) Swarf Bin, S/No. 190152 (2006)
And
Rack of CAT 40 Tooling, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 3 | Mazak Nexus VMC 510C 3 Axis Vertical Machining Centre |
| 3A | Rack of CAT 40 Tooling |