2694 - A Large Range of Precision Plant Equipment available on the instruction of the new owners of Kilgour Aviation Ltd (In Administration) due to the closure of their Aviation Component Facility, Cleveleys, Lancashire
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: Majority of lots are located in Cleveleys. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lots 18 and 51 however are located in Birmingham. Please see individual lots for loading information.
The freehold property is also available for sale/lease and measures some 12000 sq.ft. The property has ample car parking and a large rear hard-standing area suitable for additional buildings or other external use. The whole site is freehold and is offered for sale with vacant possession and open to offers in excess of £400,000., or available leasehold on a 10 year lease with a 5 year revision and rent commencing at £48,000 per annum under full RICS terms. Please contact our office for further details: + 44 (0) 121 328 2424 or email: jenny.hobbins@cottandco.com
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only on 3rd & 4th September 2018. Possible subject to change. Please contact our Office on: +44 (0) 121 328 2424 and ask for Ari or email us at: info@cottandco.com ref Kilgour viewing.
Please Note upon viewings there will be no authorised operation of the machines.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 51-60 de 88
Lot *: Combination of Lots 19 & 19A
Combination of Lots 19 & 19A
Leadwell LT20SM 5 Axis CNC Lathe with Fanuc 18T CNC Control System, Maximum Main Spindle Speed 5000rpm, Maximum Sub Spindle Speed 5000rpm, 12 Station Turret, 6 Driven Stations on Turret, Axis Travels X=230mm Z=560mm Sub Spindle=515mm, Tool Presetter, S/No. C2S1H0693 (1998)
and
Chuck and Machine Part on Pallet for Leadwell LT20SM
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 19 | Leadwell LT20SM 5 Axis CNC Lathe |
| 19A | Chuck and Machine Part on Pallet for Leadwell LT20SM |
Lot 20: Gildemeister DMG Sprint 32 Linear 8 Axis Sliding Head Lathe
Gildemeister DMG Sprint 32 Linear 8 Axis Sliding Head Lathe 8 Axis Sliding Head Lathe with Ge Fanuc 160i-B Control System, Maximum Spindle Speeds Main 8000rpm Sub 5000rpm Driven Tool Speed 5000rpm, Axis Travels X1= 50mm Y1=350mm Z1=120mm X2=265mm Y2=235mm Z2=320 C1=360 degrees C2=360 degrees, Maximum Turning Diameter 32mm, Parts Conveyor, Swarf Conveyor, Iemca Boss 54 Barfeed, Swarf Bin. S/No. 2301-0142 (2003)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Lot 21: Eguro Nuclet 10GL CNC 3 Axis Platten Lathe
Eguro Nuclet 10GL CNC 3 Axis Platten Lathe with Fanuc OT CNC Control System, Maximum Spindle Speed 5000rpm, Axis Travels X-260mm Z=250mm, 3-Jaw Chuck, Collet Chuck, Table Size 700 x 180mm, Parts Conveyor, S/No. 0003E (1996)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 21A: IEMCA VIP 52/15 Barfeed
IEMCA VIP 52/15 Barfeed (1997)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 21B: Grinding Attachment for Eguro Nuclet 10GL CNC 3 Axis Platten Lathe
Grinding Attachment for Eguro Nuclet 10GL CNC 3 Axis Platten Lathe
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 21, 21A & 21B
Combination of lots 21, 21A & 21B
Eguro Nuclet 10GL CNC 3 Axis Platten Lathe with Fanuc OT CNC Control System, Maximum Spindle Speed 5000rpm, Axis Travels X-260mm Z=250mm, Table Size 700 x 180mm, Parts Conveyor, S/No. 0003E (1996)
and
Iemca VIP 52/15 Barfeed (1997)
and
Grinding Attachment for Eguro Nuclet 10GL CNC 3 Axis Platten Lathe
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 21 | Eguro Nuclet 10GL CNC 3 Axis Platten Lathe |
| 21A | IEMCA VIP 52/15 Barfeed |
| 21B | Grinding Attachment for Eguro Nuclet 10GL CNC 3 Axis Platten Lathe |
Lot 22: XYZ Protam/Kingrich L425/KR-L480 CNC Lathe
XYZ Protam/Kingrich L425/KR-L480 CNC Lathe with Prototrak VL DRO, 1.1m Distance Between Centres, Quick Change Tooling. S/No. L173 (2002)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 22A: Quick Change Tooling
Quick Change Tooling for XYZ Protam/Kingrich L425/KR-L480 CNC Lathe
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 22 & 22A
Combination of lots 22 & 22A
XYZ Protam/Kingrich L425/KR-L480 CNC Lathe with Prototrak VL DRO, 1.1m Distance Between Centres, Quick Change Tooling. S/No. L173 (2002)
and
Quick Change Tooling for XYZ PROTAM/KINGRICH L425/KR-L480 CNC Lathe
Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 22 | XYZ Protam/Kingrich L425/KR-L480 CNC Lathe |
| 22A | Quick Change Tooling |
Lot 23: Swift 12.SV.5 Lathe
Swift 12.SV.5 Lathe with Acu-Rite DRO, 3ft 4-Jaw Chuck. S/No. 13094
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.