2694 - A Large Range of Precision Plant Equipment available on the instruction of the new owners of Kilgour Aviation Ltd (In Administration) due to the closure of their Aviation Component Facility, Cleveleys, Lancashire
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: Majority of lots are located in Cleveleys. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lots 18 and 51 however are located in Birmingham. Please see individual lots for loading information.
The freehold property is also available for sale/lease and measures some 12000 sq.ft. The property has ample car parking and a large rear hard-standing area suitable for additional buildings or other external use. The whole site is freehold and is offered for sale with vacant possession and open to offers in excess of £400,000., or available leasehold on a 10 year lease with a 5 year revision and rent commencing at £48,000 per annum under full RICS terms. Please contact our office for further details: + 44 (0) 121 328 2424 or email: jenny.hobbins@cottandco.com
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only on 3rd & 4th September 2018. Possible subject to change. Please contact our Office on: +44 (0) 121 328 2424 and ask for Ari or email us at: info@cottandco.com ref Kilgour viewing.
Please Note upon viewings there will be no authorised operation of the machines.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 88
Lot 7A: (1) Small Steel Table and Tooling for Mazak Nexus QTN 200 MSY
(1) Small Steel Table with Wooden Top and Tooling for Mazak Nexus QTN 200 MSY
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 7 & 7A
Combination of Lots 7 & 7A
Mazak Nexus QTN 200 MSY 6 Axis Turning Centre with Mazatrol Nexus 640T Control System, Maximum Spindle Speeds Main 5000rpm, Sub Spindle 6000rpm, Milling Speed 4500rpm, Axis Travels X=260mm Y=140mm Z=475mm W= Tbc Main Spindle C=360 Degrees (0.001) Sub Spindle C=360 Degrees (0.001), 12 Station Turret, Tool Presetter, Parts Catcher, Multifeed MX1B Barfeed, Swarf Bin, S/No. 184741 (2006)
and
(1) x Small Steel Table with Wooden Top and Tooling for Mazak Nexus QTN 200 MSY
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 7 | Mazak Nexus QTN 200 MSY 6 Axis Turning Centre |
| 7A | (1) Small Steel Table and Tooling for Mazak Nexus QTN 200 MSY |
Lot 8: Deckel Maho DMU 70 Evolution 5 Axis Vertical Machining Centre
Deckel Maho DMU 70 Evolution 5 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=750mm Y=600mm Z=520mm C=360 Degrees (0.001) B=180 Degrees, HSK A 63 Spindle Taper, 60 Station ATC, Blum Tool Presetter, Swarf Conveyor, Coolant Filtration Unit, Swarf Bin, S/No. 15035710924 (2006)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 8A: Rack of HSK Tooling for DMU 70 Evolution
Rack of HSK Tooling for DMU 70 Evolution, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 8 & 8A
Combination of Lots 8 & 8A
Deckel Maho DMU 70 Evolution 5 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=750mm Y=600mm Z=520mm C=360 Degrees (0.001) B=180 Degrees, HSK A 63 Spindle Taper, 60 Station ATC, Blum Tool Presetter, Swarf Conveyor, Coolant Filtration Unit, Swarf Bin, S/No. 15035710924 (2006)
and
Rack of HSK Tooling for DMU 70 Evolution, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 8 | Deckel Maho DMU 70 Evolution 5 Axis Vertical Machining Centre |
| 8A | Rack of HSK Tooling for DMU 70 Evolution |
Lot 9: Deckel Maho DMU 50 Evolution 5 Axis Vertical Machining Centre
Deckel Maho DMU 50 Evolution 5 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=500mm Y =450mm Z=400mm C=360 Degrees (0.001) B=160 Degrees, HSK A 63 Spindle Taper, Coolant Filtration Unit, Swarf Conveyor, Through Spindle Coolant, S/No. 10915558924 (2007)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 9A: Rack of HSK Tooling for Deckel Maho DMU 50 Evolution
Rack of HSK Tooling for Deckel Maho DMU 50 Evolution, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 9 & 9A
Combination of Lots 9 & 9A
Deckel Maho DMU 50 Evolution 5 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 18000rpm, Axis Travels X=500mm Y =450mm Z=400mm C=360 Degrees (0.001) B=160 Degrees, HSK A 63 Spindle Taper, Coolant Filtration Unit, Swarf Conveyor, Through Spindle Coolant, S/No. 10915558924 (2007)
and
Rack of HSK Tooling for Deckel Maho DMU 50 Evolution, Rack Included
Please Note: These lots are located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 9 | Deckel Maho DMU 50 Evolution 5 Axis Vertical Machining Centre |
| 9A | Rack of HSK Tooling for Deckel Maho DMU 50 Evolution |
Lot 10: Deckel Maho DMU DMC 1035V 3 Axis Vertical Machining Centre
Deckel Maho DMU DMC 1035V 3 Axis Vertical Machining Centre with Heidenhain ITNC 530 Control System, Maximum Spindle Speed 10000rpm, Axis Travels X=1035mm Y=560mm Z=510mm, Din40 Spindle Taper, 30 Station ATC, Table Dimensions 1200 x 560mm, Swarf Conveyor, Coolant Filtration Unit, Through Spindle Coolant, 160mm Diameter 4th Axis, S/No. 15425023754 (2007)
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 10A: Rack of CAT 40 Tooling for Deckel Maho DMU DMC 1035V
Rack of CAT 40 Tooling for Deckel Maho DMU DMC 1035V, Rack Included
Please Note: This lot is located in Cleveleys. Unfortunately, there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.