2328 - Machine Tools previously used in an Outstanding Ultra High Precision Machining Facility at Meister Benelux, Belgium
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Sprimont, Belgium
A sole contractor has been appointed to disconnect and load all of the machinery for these auctions - please see full details in the 'specific conditions' under the notice to purchasers section
Sole Contractor contact Information:
DDM Belgium N.V
Geleenlaan 24, B-3600 Genk, Belgium
Tel: + 32 89 32 00 32 Mobile: + 32 474 93 02 51 Fax: + 32 89 32 00 30
Email: joris.beens@ddm.eu Website: www.ddm.eu
Auction is held at 1pm (UK Time) - 2pm (CET Time)
Please Click here to view the English Version of the Meister Brochure
Please Click here to view the French Version of the Meister Brochure
VAT Reverse Charges apply to this auction
This Auction is being held in association with Hilco Industrial Acquisitions BV - Amsterdam whom the purchaser will receive an invoice from
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 0.00%.'
Temps de consultation
Viewing is available on the 1st and 2nd October 2014, by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Conditions spécifiques
Lots 11-20 de 92
Lot 9: Kummer K250A Speed CNC High Precision, High Production and Hard Turning Lathe with Siemens 840D-SL Control
Kummer K250A Speed CNC High Precision, High Production and Hard Turning Lathe with Siemens 840D-SL Control, Spindle Speeds 300-10,000 RPM, Linear X + Z Axis, Spindle has C-Axis, Bowl Feed & Schunk Loader. S/No. T4058 (2009)
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1835, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Lot 10: Schaublin 110-CNC Slant Bed CNC Lathe with Fanuc 18T Control
Schaublin 110-CNC Slant Bed CNC Lathe with Fanuc 18T Control, Tumac Bowl Feeder & Loader, Platern Tools. S/No. 337738 (1997)
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1195, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Lot 11: Index MS32G (3) 6-Spindle Multi Axis CNC Automatic Lathe with Sinumerik C200-4D Control
Index MS32G (3) 6-Spindle Multi Axis CNC Automatic Lathe with Sinumerik C200-4D Control & (6) Sub-spindles. S/No. 150043 Front End: (1) Turning/Back End Slide, (6) Turning Slides, (2) Cross Drilling Pick Up. Back End: (8) Turning Slides/Back End, Pick Up Unit & Parts Conveyor. Knoll 320S-1/250 Swarf Conveyor (1999), Knoll Maschinenbau VRF MT, Knoll VRF 500 Swarf Management System. S/No. KTS3248 (1999), Iemca Type SIRMS32/33/F Multi Magazine Barfeed (1999), Lufttechnik Mist Extractor
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1835, please note this price does not include packing or strapping - this is at the responsibility ...
Lot 12: Index MS32P 450033 6-Spindle Multi Axis CNC Lathe with Sinumerik C200-4D Control
Index MS32P 450033 6-Spindle Multi Axis CNC Lathe with Sinumerik C200-4D Control, (6) Spindles, (6) Slides, (3) Cross Drill/Driven Tools, (1) Sub-spindle, (7) Turning Slides, Pickup Unit & Parts Conveyor. S/No. MS32P150033 (1999), Knoll Maschinen Bau VRF MT High Pressure Coolant, Knoll S320 S-1/250 Swarf Conveyor (1997), Knoll VRF 500, Iemca SIR MS32/33F Magazine Barfeed. S/No. 0200125M02 (2001), Lufttechnik Mist Extractor
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €2075, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 13: Fanuc Robot M6iB Pick & Place Robot with Fanuc System R-J3iB Control
Fanuc Robot M6iB Pick & Place Robot with Fanuc System R-J3iB Control (2002)
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €450, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 13A: Microrex CNC Centreless Grinder with Mitsubishi Control
Microrex CNC Centreless Grinder with Mitsubishi Control, 1317, Reconstructed by Precision Machine Outils in 2003 with Coolant Paper Clarifier
Please Note: This Item is located in Sprimont, Belgium
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination Bid to Include Lots 12, 13 & 13A
Index MS32P 450033 6-Spindle Multi Axis CNC Lathe with Sinumerik C200-4D Control, (6) Spindles, (6) Slides, (3) Cross Drill/Driven Tools, (1) Sub-spindle, (7) Turning Slides, Pickup Unit & Parts Conveyor. S/No. MS32P150033 (1999), Knoll Maschinen Bau VRF MT High Pressure Coolant, Knoll S320 S-1/250 Swarf Conveyor (1997), Knoll VRF 500, Iemca SIR MS32/33F Magazine Barfeed. S/No. 0200125M02 (2001), Lufttechnik Mist Extractor
with
Fanuc Robot M6iB Pick & Place Robot with Fanuc System R-J3iB Control (2002)
and
Microrex CNC Centreless Grinder with Mitsubishi Control, 1317, Reconstructed by Precision Machine Outils in 2003 with Coolant Paper Clarifier
Please Note: These Items are located in Sprimont, Belgium
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 14: Polygon Turning Attachment – Indexing Machines
Polygon Turning Attachment – Indexing Machines
Please Note: These Items are located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €65, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Lot 15: Tornos Multi Deco 20/8b 8-Spindle Multi Axis CNC Lathe with Tornos Fanuc PNC Deco CNC Control
Tornos Multi Deco 20/8b 8-Spindle Multi Axis CNC Lathe with Tornos Fanuc PNC Deco CNC Control, NSK E3000C High Speed Spindle Controller, 20,909 running hours. S/No. 8079 with Iemca PRA 5233F MultiBar Magazine Barfeed. No. 020721PA01 (2007), High Pressure Coolant Hydracell Pump, Olaer (Schweiz) AG Stork Tronic Chiller (2006), Sermento Swarf Conveyor (2006)
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1835, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 16: Tornos Multi Deco 20/8b 8-Spindle Multi Axis CNC Lathe with Tornos Fanuc PNC Deco CNC Control
Tornos Multi Deco 20/8b 8-Spindle Multi Axis CNC Lathe with Tornos Fanuc PNC Deco CNC Control, NSK Astro E400 Model NE52 High Speed Spindle Controller, 35,638 running hours. S/No. 6313 with Tornos MSF-522 MultiBar Magazine Barfeed (2004), Sediltec High Pressure, Coolant/Filtration Hydra Chiller, Parts Conveyor, Vibra Tech Parts Turntable (2005) & Sermento Swarf Conveyor
Please Note: This Item is located in Sprimont, Belgium