2328 - Machine Tools previously used in an Outstanding Ultra High Precision Machining Facility at Meister Benelux, Belgium
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Sprimont, Belgium
A sole contractor has been appointed to disconnect and load all of the machinery for these auctions - please see full details in the 'specific conditions' under the notice to purchasers section
Sole Contractor contact Information:
DDM Belgium N.V
Geleenlaan 24, B-3600 Genk, Belgium
Tel: + 32 89 32 00 32 Mobile: + 32 474 93 02 51 Fax: + 32 89 32 00 30
Email: joris.beens@ddm.eu Website: www.ddm.eu
Auction is held at 1pm (UK Time) - 2pm (CET Time)
Please Click here to view the English Version of the Meister Brochure
Please Click here to view the French Version of the Meister Brochure
VAT Reverse Charges apply to this auction
This Auction is being held in association with Hilco Industrial Acquisitions BV - Amsterdam whom the purchaser will receive an invoice from
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 0.00%.'
Temps de consultation
Viewing is available on the 1st and 2nd October 2014, by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Conditions spécifiques
Lots 21-30 de 92
Lot *: Combination to Include Lots 15 & 16
Tornos Multi Deco 20/8b 8-Spindle Multi Axis CNC Lathe with Tornos Fanuc PNC Deco CNC Control, NSK E3000C High Speed Spindle Controller, 20,909 running hours. S/No. 8079 with Iemca PRA 5233F MultiBar Magazine Barfeed. No. 020721PA01 (2007), High Pressure Coolant Hydracell Pump, Olaer (Schweiz) AG Stork Tronic Chiller (2006), Sermento Swarf Conveyor (2006)
and
Tornos Multi Deco 20/8b 8-Spindle Multi Axis CNC Lathe with Tornos Fanuc PNC Deco CNC Control, NSK Astro E400 Model NE52 High Speed Spindle Controller, 35,638 running hours. S/No. 6313 with Tornos MSF-522 MultiBar Magazine Barfeed (2004), Sediltec High Pressure, Coolant/Filtration Hydra Chiller, Parts Conveyor, Vibra Tech Parts Turntable (2005) & Sermento Swarf Conveyor ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 17: Tool Setter for Tornos Multi S810 – BR010 Machine
Tool Setter for Tornos Multi S810 – BR010 Machine, Banc de Reglage
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €100, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Lot 18: Tornos Deco 2000/26 Multi Axis CNC Lathe with Fanuc PNC Deco Control
Tornos Deco 2000/26 Multi Axis CNC Lathe with Fanuc PNC Deco Control, Parts Conveyor, 15,801 Running Hours. S/No. T.63313 (1999), Boss S42 CNC/32R Magazine Barfeed (1999) & Lufftechnik Mist Extraction
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1835, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Lot 19: Tool Setter for Deco S810 BR030 Banc De Reglage
Tool Setter for Deco S810 BR030 Banc De Reglage
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €130, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Lot 20: Citizen Cincom M-16 CNC Sliding Head Lathe with Mitsubishi Meldas Control
Citizen Cincom M-16 CNC Sliding Head Lathe with Mitsubishi Meldas Control, 10-Station Turret, Sub-Spindle, (4) Turning, (3) Cross Milling/Drilling, (3) Rear Toolpost, Parts Catcher, Parts Conveyor, (7) Driven Tools, (10) Static Tools, Collets, Tool Kit, Manuals. S/No. P10154 (2000), Iemca Boss 432/32 Magazine Barfeed. S/No. 0200036N21 (2000), Lufftechnik Mist Extractor
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €1835, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Lot 21: Citizen Tool Setter
Citizen Tool Setter
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €130, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Lot 22: Hardinge Conquest Twin Turn 65 7-axis Turning Centre with Fanuc 18iT Control
Hardinge Conquest Twin Turn 65 7-axis Turning Centre with Fanuc 18iT Control, Twin Spindle (4000rpm), Twin Turrets (12-Station) with Driven Tools (8000rpm), Maximum swing 494mm, Turning Length 450mm, 65mm bar capacity, 28,411 Running Hours. S/No. TT118 (1998 - USA Built), Tool Prestter, High Pressure Coolant, Turbo Swarf Conveyor, Parts Catcher, Parts Conveyor, Promatec Mist Extraction. Iemca Tal Auto 65/32 Magazine Barfeed. S/No. 199949D03 (1999)
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €2225, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 23: Tooling for Hardinge
Tooling for Hardinge
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €85, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination Bid to Include Lots 22 & 23
Hardinge Conquest Twin Turn 65 7-axis Turning Centre with Fanuc 18iT Control. Twin Spindle (4000rpm), Twin Turrets (12-Station) with Driven Tools (8000rpm), Maximum swing 494mm, Turning Length 450mm, 65mm bar capacity, 28,411 Running Hours. S/No. TT118 (1998 - USA Built), Tool Prestter, High Pressure Coolant, Turbo Swarf Conveyor, Parts Catcher, Parts Conveyor, Promatec Mist Extraction. Iemca Tal Auto 65/32 Magazine Barfeed. S/No. 199949D03 (1999)
and
Tooling for Hardinge Machine
Please Note: These Items are located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €2475, please note this price does not include packing or strapping - this is at the responsibility ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
22 | Hardinge Conquest Twin Turn 65 7-axis Turning Centre with Fanuc 18iT Control |
23 | Tooling for Hardinge |
Lot 24: Index V100 Vertical Turning Centre with C200-4D Control with Renishaw LP2 Probe
Index V100 Vertical Turning Centre with C200-4D Control with Renishaw LP2 Probe, S/No. 000123 (2007) (Plant No. V100-6), GMN Grinding Spindle (2006), Rexroth RD500, Roundtrack System as Schnaithmann Through Feed, Bowlfeed, Buchel Mist Extractor
Please Note: This Item is located in Sprimont, Belgium