Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of CAT40 Tool Holders and Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 100 & 100A

Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

and

Qty of CAT40 Tool Holders, Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of CAT40 Tool Holders and Collets

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 101 & 101A

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

and

Qty of CAT40 Tool Holders and Collets

Please Note: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hurco VM1 Machining Centre with Hurco Max Control, 16 ATC, Table Size 760mm x 350mm, 6” Machine Vice, Qty of BT 40 Tooling. S/No. H-V11662 (2006)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bridgeport VMC 800/22 Digital Machining Centre with Heidenhain 4266 Control, Table size 1000mm x 490mm, 6" Machine Vice, Qty of BT40 Tool Holders. S/No. 721748 (1998)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of BT40 Tool Holders & Collets

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 201 & 201A

Bridgeport VMC 800/22 Digital Machining Centre, with Heidenhain 4266 Control, Table size 1000mm x 490mm, 6" Machine Vice, Qty of BT40 Tool Holders. S/No. 721748 (1998)

and

Qty of BT40 Tool Holders & Collets

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bridgeport Series II Interact 4 CNC Mill with Heidenhain 370 Control, Table Size 960mm x 380mm, 6" Machine Vice, Qty of CAT40 Tool Holders. S/No. 618990895

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bridgeport Series II Interact 4 CNC Mill with Heidenhain TNC 2500 Control, Table Size 960mm x 380mm, 6" Machine Vice, Qty of CAT40 Tool Holders. S/No. 618540194

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of BT40 Tool Holders and Collets

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bridgeport Series II Interact 4 CNC Mill with Heidenhain TNC 2500 Control, Table Size 960mm x 380mm, 6" Machine Vice, Qty of CAT40 Tool Holders. S/No. 618540194

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

XYZ SLX Turn 425 x 1.25m Lathe with Proto Trax SLX Control, Gap Bed, 10" 3 Jaw Chuck, 3 Point Steady, 16" Face Plate, Max RPM 2500, Qty of Quick Change Tooling. S/No. 4537 (2012)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Quick Change Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of lots 204 & 204A XYZ SLX Turn 425 x 1.25m Lathe with Proto Trax SLX Control, Gap Bed, 10" 3 Jaw Chuck, 3 Point Steady, 16" Face Plate, Max RPM 2500, Qty of Quick Change Tooling. S/No. 4537 (2012) and Qty of Quick Change Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

ONA DB300 Spark Eroder with ONA Control, 8" Machine Vice, Table Size 650mm x 400mm, Tank Size 900mm x 600mm x 350mm Deep, Qty of System 3R Tooling. S/No. 11432 (2010)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of System 3R Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 205 & 205A 

ONA DB300 Spark Eroder with ONA Control, 8" Machine Vice, Table Size 650mm x 400mm, Tank Size 900mm x 600mm x 350mm Deep, Qty of System 3R Tooling. S/No. 11432 (2010)

and

Qty of System 3R Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

ONA DB300 Spark Eroder with ONA Control, Table Size 310mm x 150mm Magnetic Chuck, Table Size 650mm x 400mm, Tank Size 900mm x 600mm x 350mm Deep. S/No. 10871 (2004)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of System 3R Tooling and Cabinet

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 206 & 206A

ONA DB300 Spark Eroder with ONA Control, Table Size 310mm x 150mm Magnetic Chuck, Table Size 650mm x 400mm, Tank Size 900mm x 600mm x 350mm Deep. S/No. 10871 (2004)

and

Qty of System 3R Tooling and Cabinet

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Ceruti TNC 60 5ft Radial Drill, Box Table, 42" x 33" x 20". S/No. 10829

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Startrite H250M Horizontal Saw. S/No. 97551

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Millutensil Tri Out Press, Type BV 25/1, Bed Size 850mm x 530mm Depth 750mm. S/No. 408/2516

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydrovane Compressor Model 13PO. S/No. 14HV162113

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Makita 2414K Chop Saw, Blade Size 355mm. S/No. 4730E

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Clarke CSB20B Shot Blast Cabinet 450mm x 350mm x 250mm Work Area. S/No. 7640110

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

DC96-6420 Extractor Unit, M/C Reference EMB330/5-5RW. S/No. 4575

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Granite Surface Table 3ft x 3ft

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Granite Surface Block 18" x 18"

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of External and Internal Micrometers

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Depth Gauges, Clock Gauges and Stand

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jones & Shipman Rotary Table, 12" Model. S4012-012/1

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mecatecnica Rotary Table Model: PHVD250. S/No. P64113

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sine Table 260mm x 130mm

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sine Table 7" x 4"

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Eclipse Magnetic Chuck 10" x 5"

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Eclipse Magnetic Chuck 18" x 6"

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

8" Machine Vice

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

6" Machine Vice

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

4" Swivel Machine Vice

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

6" Machine Vice

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

6" Machine Vice

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Swivel Angle Plate 320mm x 260mm, Angle Plate 310mm x 230mm

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Drills and End Mills with Cupboard

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(2) x Metal Racks with Qty of Drills (Excluding all other contents)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Small Cupboard with Qty of Drills

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mobile Trolley

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(4) x Heavy Duty Metal Work Benches, (1) with a 5" Vice

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

7 Drawer Bott Cabinet with a Large Qty of Drills and Reamers

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Cupboard with a large Qty of 3R Stems

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

36 Drawer Cabinet with Qty of Drills, Taps and Reamers

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Cupboard and Cabinet with Contents

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Steel Table 3ft x 3ft

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sodick AP3 Model FS-SAP3 Spark Eroder with Fine Sodick Mark X EDM Control, Table Size: 600mm x 300mm, Tank Size: 700mm x 500mm x 320mm depth, Homemade Plate: 400mm x 250mm, 3R System. S/No. SAP3 207 (1991)

Please Note: This Machine is not in working order, sold as is for spares and repairs

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Medding Model DTB Bench Drill. S/No. 533789 with Bench.

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Coolie Tool Lift, SWL 500KG. S/No. 503515407

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tamsan Compressor TVK 1100TK, 8 Bar. S/No. 7022 (2015)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.