2823A - Hurco and Bridgeport Machining Centres, Bridgeport CNC Mills, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Worcester
Engineering
Asta conclusa il
Tempo residuo
Descrizione asta
Location: These lots are located in Cannock and Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Premio dell'acquirente
Il premio dell'acquirente verrà addebitato a 16.00%.
IVA
IVA applicata pari al 20.00%.
Date ispezioni
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Nota Bene: - Qualsiasi traduzione uttilizzando ''Google Translate'' non è garantita come una traduzione accurata ed è solo a scopo di guida. La descrizione principale del lotto è in inglese ed e data a migliore conoscenza del banditore. Tuttavia, la precisione non è garantita e deve essere verificata dall'acquirente prima di fare offerte.
Avviso ai compratori
Termine ultimo pagamento
Termine ultimo ritiro
Spedizionieri
Squadre per il carico
Dettagli Esportazione/importazione dal UK
Lotti 1-10 di 92
Lotto 100: Hurco VMX 30 Vertical Machining Centre
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Attenzione, questo lotto è disponibile anche come combinazione.
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca quiLotto 100A: Qty of CAT40 Tool Holders
Qty of CAT40 Tool Holders and Collets and Bench
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Attenzione, questo lotto è disponibile anche come combinazione.
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca quiLotto *: Combination of Lots 100 & 100A
Combination of Lots 100 & 100A
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
and
Qty of CAT40 Tool Holders, Collets and Bench
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotti compresi in questa combinazione
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca quiLotto # | Descrizione |
---|---|
100 | Hurco VMX 30 Vertical Machining Centre |
100A | Qty of CAT40 Tool Holders |
Lotto 101: Hurco VSX24 Vertical Machining Centre
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Attenzione, questo lotto è disponibile anche come combinazione.
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca quiLotto 101A: Qty of CAT40 Tool Holders and Collets
Qty of CAT40 Tool Holders and Collets
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Attenzione, questo lotto è disponibile anche come combinazione.
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca quiLotto *: Combination of Lots 101 & 101A
Combination of Lots 101 & 101A
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
and
Qty of CAT40 Tool Holders and Collets
Please Note: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotti compresi in questa combinazione
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca quiLotto # | Descrizione |
---|---|
101 | Hurco VSX24 Vertical Machining Centre |
101A | Qty of CAT40 Tool Holders and Collets |
Lotto 200: Hurco VM1 Machining Centre
Hurco VM1 Machining Centre with Hurco Max Control, 16 ATC, Table Size 760mm x 350mm, 6” Machine Vice, Qty of BT 40 Tooling. S/No. H-V11662 (2006)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotto 201: Bridgeport VMC 800/22 Digital Machining Centre
Bridgeport VMC 800/22 Digital Machining Centre with Heidenhain 4266 Control, Table size 1000mm x 490mm, 6" Machine Vice, Qty of BT40 Tool Holders. S/No. 721748 (1998)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Attenzione, questo lotto è disponibile anche come combinazione.
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca quiLotto 201A: Qty of BT40 Tool Holders & Collets
Qty of BT40 Tool Holders & Collets
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Attenzione, questo lotto è disponibile anche come combinazione.
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca quiLotto *: Combination of Lots 201 & 201A
Combination of Lots 201 & 201A
Bridgeport VMC 800/22 Digital Machining Centre, with Heidenhain 4266 Control, Table size 1000mm x 490mm, 6" Machine Vice, Qty of BT40 Tool Holders. S/No. 721748 (1998)
and
Qty of BT40 Tool Holders & Collets
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lotti compresi in questa combinazione
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca quiLotto # | Descrizione |
---|---|
201 | Bridgeport VMC 800/22 Digital Machining Centre |
201A | Qty of BT40 Tool Holders & Collets |