MTE BF-2700 CNC Bedmill, Model with Heidenhain ITNC 530 Control, Table Size 1000mm x 2685mm, 24-Station Tool Changer, Swarf Conveyor. S/No. 0524598 (2004)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty CAT50 Tooling suitable for Fresatrice A Banco Fisso CNC Bedmill with Collets

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tapping Attachment Suitable for Fresatrice A Banco Fisso CNC Bedmill

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 1, 1A & 1B

Fresatrice A Banco Fisso CNC Bedmill, Model MTE BF-2700 with Heidenhain ITNC 530 Control, Table Size 1000mm x 2685mm, 24-Station Tool Changer, Swarf Conveyor

Qty CAT50 Tooling suitable for Fresatrice A Banco Fisso CNC Bedmill with Collets

Quick Change Tapping Attachment Suitable for Fresatrice A Banco Fisso CNC Bedmill

Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Awea Model AW4567/03 Vertical Machining Centre with Fanuc Series 18i-MB Control, 24-Station Tool Changer, Table Size 1250mm x 610mm (2003)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Supermax Twin Pallet Model YCM V85A Vertical Machining Centre with Mitsubishi Series 500 Control, 24-Station Tool Changer, Pallet Size 950mm x 400mm. S/No. 809844 (1998)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of CAT40 Tooling and Collets (Suitable for Supermax VMC)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cupboard with CAT40 Tooling and Cutters and Electrical Components

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Tapping Attachment

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lot 5, 5A, 5B & 5C

Supermax Twin Pallet Model YCM V85A Vertical Machining Centre with Mitsubishi Series 500 Control, 24-Station Tool Changer, Pallet Size 950mm x 400mm. S/No. 809844 (1998)

Qty of CAT40 Tooling and Collets (Suitable for Supermax VMC)

Cupboard with CAT40 Tooling and Cutters and Electrical Components

Tapping Attachment

Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Gualdoni Vertical Machining Centre with Selca Control, 40-Station Tool Changer, Table Size 1300mm x 450mm. S/No. 549 C8G/01 (1993)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Haas SL-40 CNC Lathe with Haas Control, Tailstock, Tooleye, 12-Station Turret, 3-Jaw Chuck 530mm, Live Tooling and Swarf Conveyor. S/No. 3082769 (2008)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Su-Matic AH42 Live Tooling suitable for Haas Lathe

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

(2) Live VDI 40 Tooling, (1) Straight and (1) Angled and (5) Pieces of VDI 40 Tooling

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

(1) Live Angled VDI 40 Tool and (6) Pieces of VDI 40 Tooling

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

(1) Live Angled VDI 40 Tool and (6) Pieces of VDI 40 Tooling

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 7, 7A, 7B, 7C and 7D

Haas SL-40 CNC Lathe with Haas Control, Tailstock, Tooleye, 12-Station Turret, 3-Jaw Chuck 530mm, Live Tooling and Swarf Conveyor. S/No. 3082769 (2008)

and

Su-Matic AH42 Live Tooling for suitable for Haas Lathe

and

(2) Live VDI 40 Tooling, (1) Straight and (1) Angled and (5) Pieces of VDI 40 Tooling

and

(1) Live Angled VDI 40 Tool and (6) Pieces of VDI 40 Tooling

and

(1) Live Angled VDI 40 Tool and (6) Pieces of VDI 40 Tooling

Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Supermax YCM-TC-36W CNC Lathe with Fanuc Series OT Control, 12-Station Turret, 3-Jaw Chuck, Tooling and Tailstock. S/No. 204033 (2002)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Supermax YCM-TC-15 CNC Lathe with Mitsubishi Control, 12-Station Turret, 3-Jaw Chuck 210mm, Tail Stock, Tooling, Fume Extractor, Swarf Conveyor. S/No. 703389 (1997)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Parallel EST TICIMO 510 Lathe, 3-Jaw Chuck, Distance between Centres 1400mm, Chuck Dia 800mm, 4-Jaw Chuck 1m, 3-Point Steady, Bore Size 130mm, Quick Change Tooling. S/No. 00834

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

PBR T-400 Parallel Lathe, 3-Jaw Chuck diameter 430mm, Distance between Centres 1600mm, Bore Size 130mm, 3-Jaw Chuck 350mm with Gapbed.

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Momac Tormio Parallel Lathe with 2100mm distance between Centres, 3-Jaw Chuck Diameter 310mm, 3-Point Steady, 2-Point Steady, Gap Bed and Quick-Change Tooling. S/No. 43445 (2002)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling for Momac Tormio Parallel Lathe

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 12 & 12A

Momac Tormio Parallel Lathe with 2100mm distance between Centres, 3-Jaw Chuck Diameter 310mm, 3-Point Steady, 2-Point Steady, Gap Bed and Quick-Change Tooling. S/No. 43445 (2002)

and

Quick Change Tooling for Momac Tormio Parallel Lathe

Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Tiger FU120 Milling Machine with Table Size 1300mm x 300mm and Tooling Bench

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Tiger FU3L-2-71 Milling Machine with Table Size 1600mm x 310mm with Vertical Head and Viking Automation DRO

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cams 250 SAC Shaper with Table Size 560mm x 340mm. S/No. 12537 (1988)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Azimut 2m Radial Drill, Type 1600 X50 with Box Table 630mm x 500mm x 500mm. S/No. 1528A (2002)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Sasso Torimo TRL 1300 1.6m Radial Drill with Box Table 500mm x 630mm x 500mm. S/No. 1390 (1965)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bimak Model 25CR Drill

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bimak Model 22FO Drill

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Famup TC40-TR-PUDA Pedestal Drill. S/No. 2970 09 86

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cuoghi APE60 Tool Sharpener. S/No. 602258 (2002)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Aceti Model 17 Machine Belt Sander. S/No. 0817 (2001), Belt width 120mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Belt Sander, Belt width 120mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Tommasi & Bonetti Type TO45 Double Head Grinder. S/No. 66103 (2003)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Tommasi & Bonetti Type T05 Double Ended Grinder

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Leonardo Type 250 Bandsaw

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Leonard Automatic Bandsaw

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Tecnecoforni Expansion Oven, Model ES12-90 with Internal Dimension 1970mm x 1900mm, Height 1240mm, Removable Trolley, Extraction Unit. S/No. 2009277 (2009)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Electric ME320 Oven. S/No. 6535

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Lampugna Model LC Sabbiatrici Sand Blaster, Max Pressure 8 Bar, Door Opening Size 500mm x 600mm (1996)

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Weldtromic Thyricontrol 450 Welder

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Extractor

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Welding Bench with Vice

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Weldtromic Thyricontrol 450 Welder

Extractor

and

Welding Bench with Vice

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Tool Sharpener

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

EM TRS222.PB 4th Axis Unit 210mm. S/No. 8959

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

195mm Machine Vice, Length 590mm with Extension 300mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

195mm Machine Vice, Length 590mm with Extension 300mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

195mm Machine Vice, Length 590mm with Extension 300mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

195mm Machine Vice, Length 590mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

170mm Machine Vice, Length 540mm and Extension 900mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

170mm Machine Vice, Length 540mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

180mm Machine Vice, Length 490mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

170mm Machine Vice, Length 640mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

150mm Machine Vice, Length 420mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

170mm Machine Vice, Length 540mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

150mm Machine Vice, Length 500mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

150mm Machine Vice, Length 500mm

Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.