2763 - CNC Bedmills, Lathes, General Workshop Equipment and Ancillaries no longer required by Torneria Meccanica Raimondi Pierangelo, Italy
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +39 0732 677 063 or email us at: info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 129
Lot 1: MTE BF-2700 CNC Bedmill
MTE BF-2700 CNC Bedmill, Model with Heidenhain ITNC 530 Control, Table Size 1000mm x 2685mm, 24-Station Tool Changer, Swarf Conveyor. S/No. 0524598 (2004)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1A: Qty CAT50 Tooling suitable for Fresatrice A Banco Fisso CNC Bedmill with Collets
Qty CAT50 Tooling suitable for Fresatrice A Banco Fisso CNC Bedmill with Collets
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1B: Quick Change Tapping Attachment Suitable for Fresatrice A Banco Fisso CNC Bedmill
Quick Change Tapping Attachment Suitable for Fresatrice A Banco Fisso CNC Bedmill
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 1, 1A & 1B
Combination of Lots 1, 1A & 1B
Fresatrice A Banco Fisso CNC Bedmill, Model MTE BF-2700 with Heidenhain ITNC 530 Control, Table Size 1000mm x 2685mm, 24-Station Tool Changer, Swarf Conveyor
Qty CAT50 Tooling suitable for Fresatrice A Banco Fisso CNC Bedmill with Collets
Quick Change Tapping Attachment Suitable for Fresatrice A Banco Fisso CNC Bedmill
Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 4: Awea Model AW4567/03 Vertical Machining Centre
Awea Model AW4567/03 Vertical Machining Centre with Fanuc Series 18i-MB Control, 24-Station Tool Changer, Table Size 1250mm x 610mm (2003)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 5: Supermax Twin Pallet Model YCM V85A Vertical Machining Centre
Supermax Twin Pallet Model YCM V85A Vertical Machining Centre with Mitsubishi Series 500 Control, 24-Station Tool Changer, Pallet Size 950mm x 400mm. S/No. 809844 (1998)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 5A: Qty of CAT40 Tooling and Collets
Qty of CAT40 Tooling and Collets (Suitable for Supermax VMC)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 5B: Cupboard with CAT40 Tooling
Cupboard with CAT40 Tooling and Cutters and Electrical Components
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 5C: Tapping Attachment
Tapping Attachment
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lot 5, 5A, 5B & 5C
Combination of Lot 5, 5A, 5B & 5C
Supermax Twin Pallet Model YCM V85A Vertical Machining Centre with Mitsubishi Series 500 Control, 24-Station Tool Changer, Pallet Size 950mm x 400mm. S/No. 809844 (1998)
Qty of CAT40 Tooling and Collets (Suitable for Supermax VMC)
Cupboard with CAT40 Tooling and Cutters and Electrical Components
Tapping Attachment
Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 5 | Supermax Twin Pallet Model YCM V85A Vertical Machining Centre |
| 5A | Qty of CAT40 Tooling and Collets |
| 5B | Cupboard with CAT40 Tooling |
| 5C | Tapping Attachment |