Nakamura Tome TMC 20 CNC Lathe with Nakamura Tome Fanuc Control, 200mm 3-Jaw Chuck, Tool-eye, 8-Station Turret, 110mm 3-Jaw Chuck on Sub Spindle, Parts Catcher. S/No. 11819 with Iemca Kid40 Short Magazine (1988)

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Akebono 4AC-35 CNC Lathe with Fanuc Control, Collet Chuck and Twin Turret and 6-Station. S/No. 4000058 (1987)

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Iemca D70 Model Kid 70 Short Magazine Barfeed. S/No. 020638QA06 (2006)

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Samsys Multi-3000 Type M3000 Short Magazine Barfeed. S/No. 09/643 (2009)

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cincinnati Milacron Dart 500 Vertical Machining Centre with Cincinnati Acramatic A2100 Control, Table Size 700mm x 510mm, 20-Station Tool Changer, BT40 Tooling. S/No. 7053 A0A-RM-0065 (1997) with 6-Tool Holders, Excluding Vices.

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Elliot Sturdmill 1250 Vertical Milling Machine, Table Size 50’’ x 10½‘’ S/No. BEC018296/182

Please Note: Excluding Vice

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Harrison Horizontal Milling Machine, Table Size 30’’ x 8’’. S/No. 143582

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Colchester Bantam Lathe with 5’’ 3-Jaw Chuck, Quick Change Tooling, Distance between centres 20’’, Colchester Lathe Steady

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Harrison M300 Lathe with 6’’ 3-Jaw Chuck, 4 Jaw Chuck, 2 x Steady Rests and a Tapper Turning Attachment, 26’’ Distance between Centres. S/No. 304985

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge HC Model HC 2AT Chucking Lathe with Collet Chuck & Collets, 8-Station Turret

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Engraver/Router

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

The Hutton Bench Punch Press with Tooling

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Rusch HBSA 250 Bandsaw. S/No. 42143

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Ajax Type B-16L Precision Drill. S/No. 3422

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Buck & Hickman Drill. S/No.3-1191

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

(5) Meddings Drills

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Conemaster Bar Coner. S/No. 4972

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Vixen Rotary Parts Washer, Basket 32’’ x 12’’

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Malmkrist Parts Washer, 2ft x 8’’ Basket Size

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

A4 Vertical Belt Linisher, 4’’

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Large Qty of Collets 2047 with Collet Chuck

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty Collets Kitagawa BT 208 2-Jaw Hydraulic Chuck, Collet Chuck CDC 42 and Qty VD1 Tooling

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Kitagawa 3-Jaw Chuck 208mm

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Kitagawa 3-Jaw Chuck 208mm

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Autoblock 210BB 3-Jaw Chuck

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Crawford Collets

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser

Qty VD1 40 Tooling

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty VD1 40 Tooling and (1) Live Tool

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of VD1 40 Tooling

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of VD1 30 Tooling

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Collets

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Centres and Sleeves

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Taper Writer & Qty of Manuals

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Fanuc Motors

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Fanuc Motors

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Electronical Equipment

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Box of Carbide Tip Holders

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

ISO 40 Boring Bar & Rigibore BT40 Tools

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

5-Inch 3-Jaw Chuck

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

(3) Boxes of Drills & Box of Reamers

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collect Spin Index Type PF70-5C Chuck Fixtures

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Rotary Table

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

125mm 2-Jaw Chuck and (2) V Blocks

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Mobile Bench with Bott Cabinet, 2m x 700mm x 930mm high (excluding contents)
Bench with 3-Draws 1120mm x 860mm x 780mm high (excluding contents)
Bench 1520mm x 760mm x 780mm high (excluding contents)

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Slotted Metal Box Table, 320mm x 280mm x 310mm high & (2) Stands

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Wooden Cabinet including Drills Cutters, Reamers and Taps

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Steel Table 1.5m x 610mm x 760mm high with vice (excluding contents)

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

(195) Tote Tins

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of Dismantled Heavy Duty Racking

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hauser Type 215 Shadowgraph with Sony DRO. S/No.222

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

(2) Lockers

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

(2) x  Unused Grundfos Coolant Pumps

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

(2) Light Guards

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Allen West & Co Surface Grinder with Eclipse Magnetic Chuck

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

10 Drawer cabinet with various Drills, Reamers, Taps and Milling Cutters

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Various Letter and Number Stamps and Holders

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Autolock for Milling Machine

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Autolock and Various Tool Holders for Milling Machine

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Wavy Parallels, Speed Test Indicator, Moore & Wright Gauge

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Eclipse Magnetic Chuck

Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.