2735 - CNC Machining & Turning Centres, Toolroom Machinery and Ancillaries surplus to the ongoing requirements of Freeman & Pardoe Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 78
Los 100: Nakamura Tome TMC 20 CNC Lathe
Nakamura Tome TMC 20 CNC Lathe with Nakamura Tome Fanuc Control, 200mm 3-Jaw Chuck, Tool-eye, 8-Station Turret, 110mm 3-Jaw Chuck on Sub Spindle, Parts Catcher. S/No. 11819 with Iemca Kid40 Short Magazine (1988)
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 101: Akebono CNC Lathe
Akebono 4AC-35 CNC Lathe with Fanuc Control, Collet Chuck and Twin Turret and 6-Station. S/No. 4000058 (1987)
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 102: Iemca D70 Model Kid 70 Short Magazine Barfeed
Iemca D70 Model Kid 70 Short Magazine Barfeed. S/No. 020638QA06 (2006)
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 103: Samsys Multi-3000 Type M3000 Short Magazine Barfeed
Samsys Multi-3000 Type M3000 Short Magazine Barfeed. S/No. 09/643 (2009)
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 105: Cincinnati Milacron Dart 500 Vertical Machining Centre
Cincinnati Milacron Dart 500 Vertical Machining Centre with Cincinnati Acramatic A2100 Control, Table Size 700mm x 510mm, 20-Station Tool Changer, BT40 Tooling. S/No. 7053 A0A-RM-0065 (1997) with 6-Tool Holders, Excluding Vices.
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 106: Elliot Sturdmill 1250 Vertical Milling Machine
Elliot Sturdmill 1250 Vertical Milling Machine, Table Size 50’’ x 10½‘’ S/No. BEC018296/182
Please Note: Excluding Vice
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 107: Harrison Horizontal Milling Machine
Harrison Horizontal Milling Machine, Table Size 30’’ x 8’’. S/No. 143582
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 108: Colchester Bantam Lathe
Colchester Bantam Lathe with 5’’ 3-Jaw Chuck, Quick Change Tooling, Distance between centres 20’’, Colchester Lathe Steady
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 109: Harrison M300 Lathe
Harrison M300 Lathe with 6’’ 3-Jaw Chuck, 4 Jaw Chuck, 2 x Steady Rests and a Tapper Turning Attachment, 26’’ Distance between Centres. S/No. 304985
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 110: Hardinge HC Model HC 2AT Chucking Lathe
Hardinge HC Model HC 2AT Chucking Lathe with Collet Chuck & Collets, 8-Station Turret
Please Note: This Lot is located in Alcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.