Butler 550 Gap Bed Lathe, Swing over Bed: 550mm, Swing in Gap: 850mm, Swing over cross slide: 375mm, Distance Between Centres: 2400mm, Spindle Bore: 90mm, Spindle Speeds: up to 1000 RPM, 3-Jaw Chuck & 4-way Toolpost.

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Colchester Student 1800 Gap Bed Lathe, 25” (635mm) Distance Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds, 3-Jaw chuck, 4-Jaw chuck, Quick Change Toolpost, Digital Readout. S/No. 4/0008/09562

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Colchester Student 2500 Lathe, 1000mm Distance Between Centres, 330mm Swing over Bed, 40-2500 RPM Spindle Speeds, 3 Jaw chuck, Quick Change Toolpost

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Colchester Student 1800 Gap Bed lathe, 25” (635mm) Distance Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds, 3 Jaw chuck, 4 Jaw chuck, Quick Change Toolpost. S/No. 4/0008/00235

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Colchester Student 1800 Gap Bed Lathe, 25” (635mm) Distance Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds, 3 Jaw chuck, 4 Jaw chuck, Quick Change Toolpost, Digital Readout. S/No. 4/0008/00236

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Colchester Student 1800 Gap Bed Lathe, 25” (635mm) Distance Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds, 3 Jaw Chuck, 4 Jaw Chuck, Quick Change Toolpost. S/No. 4/0008/00233

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Colchester Student 1800 Gap Bed lathe, 25” (635mm) Distance Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds. 3 Jaw chuck, 4 Jaw chuck, Quick Change Toolpost. S/No. 4/0008/09537

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Colchester Student 1800 Gap Bed Lathe, 25” (635mm) Distance Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds, 3 Jaw chuck, 4 Jaw chuck, Quick Change Toolpost. S/No. 4/0008/00230

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

XYZ KR – V2000 (2 axis) CNC Turret Mill with Protrak MX2, 1270m x 254mm, R8 Spindle Taper, 60 – 4200 RPM (1997)

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Bridgeport Series 1 2HP BR2J Turret Mill, 1065 x 230mm Table Area, R8 Spindle Taper, 50 – 3750 Variable Spindle Speeds, Variable Feeds to Table, 2 Axis Digital Readout, Splash Guard, Coolant, Light, Table Guards.

Please Note: Machine vice not included

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Bridgeport Series 1 2HP BR2J Turret Mill, 1065mm x 230mm, R8 Spindle Taper, 50 – 3750 Variable Spindle Speeds, Variable Feeds to Table, 2 Axis Digital Readout, Splash Guard, Coolant, Light, Table Guards.

Please Note: Machine Vice not with machine.

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Bridgeport BR2J Vari Speed Turret Mill, 1065 x 230mm Table Area, R8 Spindle Taper, 50-3750 Variable Spindle Speeds, Variable Feeds To Table, 2 Axis Digital Readout, Splash Tray, Coolant, Light, Table Guards

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Bridgeport BRJ Turret Mill, 1065 x 230mm Table Area, 67 – 4600 Spindle Speeds, R8 Spindle Taper, Variable Feeds to Table, 2 Axis Digital Readout, Table Guards, Splash Tray, Coolant, Light

Please Note: Machine Vice not with machine.

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Ajax No. 1 Universal Milling Machine, 1100 x 240mm Table Area, 750mm Long Travel, 230mm Cross Travel, 400mm Vertical Travel, 40 ISO Spindle Taper, 48 – 150 RPM Spindle Speeds, 4HP Motor, Vertical Head, Arbour Support, Digital Readout, Machine Guards, Coolant, Light. S/No. 16704

Please Note: Vice not included

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Ajax No. 1 Universal Milling Machine, 1100 X 240mm Table Area, 750mm Long Travel, 230mm Cross Travel, 400mm Vertical Travel, 40 ISO Spindle Taper, 48 – 150 RPM, 4 HP Motor, Vertical Head, Arbour Support, Digital Readout, Machine Guards, Coolant, Light. S/No. 16712

Please Note: Vice not included

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Ajax No. 1 Universal Milling Machine, 1100 X 240mm Table Area, 750mm Long Travel, 230mm Cross Travel, 400mm Vertical Travel, 40 ISO Spindle Taper, 48 – 150 RPM, 4 HP Motor, Vertical Head, Arbour Support, Digital Readout, Machine Guards, Coolant, Light. S/No. 16829

Please Note: Vice not included

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Ajax No. 1 Universal Milling Machine, 1100 x 240mm Table Area, 750mm Long Travel, 230mm Cross Travel, 400mm Vertical Travel, 40 ISO Spindle Taper, 48 – 150 RPM, 4HP Motor, Vertical Head, Arbour Support, Digital Readout, Machine Guards, Coolant, Light. S/No. 16830

Please Note: Vice not included

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

CME Model F4 CM Heavy Duty Milling Machine with Full Pendant Control, 50 INT Spindle Taper, Table Area: 1700 x 600mm, Long Traverse 1200mm, Cross Traverse 780mm, Vertical Traverse 500mm, Spindle Speeds 40 – 1800 RPM, with Universal Head, 3 axis Digital Readout. (1988)

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Startrite Model H280 MV Horizontal Bandsaw, 280mm (11.2''), Quick Release Swivelling Vice, Coolant 

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Jones and Shipman 1300 Cylindrical Grinder, Swing: 200mm, Distance Between Centres: 500mm, Swing Round Internal, 3-Jaw Chuck

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Herbert No. 8 Pre Optive Turret Lathe with 500mm Swing Over Bed, 300mm Swing over top slide, 1250mm Max Turret to Chuck Face, 13 – 1000 RPM Spindle Speeds, 5/15 HP Motor, 450mm 4-Jaw Chuck, 4-Way Indexing Toolpost, 1 Turret Tool Holder, 1 Turret Facing Slide, Coolant and Pump Fittings.

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Herbert No.4 Pre Optive Monoslide Turret Lathe, 32-1500 RPM Spindle Speeds, 53mm Spindle Bore, 3-Jaw Chuck, Threading, Turret Tooling. 

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

LNS Eco load Bar Feed

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Morgan Rushworth 1250 x 75 Geared Hand Rolls, 75mm Roll Dia, BSRW Hand Operated, 1250 x 1.6mm Bending Capacity, Bottom Slip Initial pinch.

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Edwards 80 x 4 EGS Bending Rolls, 80 x 4 EGS, 2030mm (80’’) Bending Length, 100mm (4’’) Roll Diameter, 2mm Mild Steel Capacity. Machine has been fitted with electric motor to power roll if required can be removed back to manual.

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

TOS LEPD 100 Mechanical Press with 100 Ton Capacity, 100mm Stroke, 900 x 600mm Table Size, Guarding, Air Clutch, Foot Pedal. S/No. 311544/04/052 Fr

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Sunnen MBB – 1600 Speed Hone, 1.14 – 79.37mm Capacity, with Tooling. S/No. 41590

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Oerlikon Citoline 4500 Mig Welder with Feed Unit DV 4004 CTC, Water Circulation System XTS 902.

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Fronius Transtig 2600 DC Tig Welding Machine with Equipment

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Thermal Arc DC Inverter Plasma Welder with Equipment

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Brierley ZB32 Drill Grinding Machine, Capacity 1.5 – 32mm, with DCE DX7 extractor, Can drill guides, spare wheels.

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Brierley ZB 80 Drill Grinder, Capacity 12 – 80mm, with point finishing grinding attachment

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Jones and Shipman 1310 Cylindrical Grinder, Capacity: 8” x 18”, with rise and fall wheelhead, swing round internal, Digital Readout

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Dormer DG 55 Drill Grinder, Capacity 5 – 55mm

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Bridgeport BRJ Turret Mill, 1065 x 230mm Table Area, 67 – 4600 Spindle Speeds, R8 Spindle Taper, Variable Feeds to table, 2 axis Digital Readout, Table Guards, Splash Tray, Coolant, Light

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Bridgeport BRJ Turret Mill, 1065 x 230mm Table Area, 67 – 4600 Spindle Speeds, R8 Spindle Taper, Variable Feeds to table, 2 axis Digital Readout, Table Guards, Splash Tray, Coolant, Light

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

HPC Plus Air Screw Compressor, Volume 1000 litres at 12 bar, Tested to 17.1 bar, Main Motor: 55kw

Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.