2692 - Conventional and Toolroom Equipment no longer required by Scottish Training Colleges & Others removed for Convenience of Sale
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 38
Los 1: Butler 550 Gap Bed Lathe
Butler 550 Gap Bed Lathe, Swing over Bed: 550mm, Swing in Gap: 850mm, Swing over cross slide: 375mm, Distance Between Centres: 2400mm, Spindle Bore: 90mm, Spindle Speeds: up to 1000 RPM, 3-Jaw Chuck & 4-way Toolpost.
Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 2: Colchester Student 1800 Gap Bed Lathe
Colchester Student 1800 Gap Bed Lathe, 25” (635mm) Distance Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds, 3-Jaw chuck, 4-Jaw chuck, Quick Change Toolpost, Digital Readout. S/No. 4/0008/09562
Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 3: Colchester Student 2500 Lathe
Colchester Student 2500 Lathe, 1000mm Distance Between Centres,
330mm Swing over Bed, 40-2500 RPM Spindle Speeds, 3 Jaw chuck,
Quick Change Toolpost
Please Note: This lot is located in North Lanarkshire and
will be loaded free of charge to a suitable vehicle. Blocking and
securing will be at the cost of the purchaser.
Los 4: Colchester Student 1800 Gap Bed lathe
Colchester Student 1800 Gap Bed lathe, 25” (635mm) Distance Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds, 3 Jaw chuck, 4 Jaw chuck, Quick Change Toolpost. S/No. 4/0008/00235
Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 5: Colchester Student 1800 Gap Bed Lathe
Colchester Student 1800 Gap Bed Lathe, 25” (635mm) Distance Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds, 3 Jaw chuck, 4 Jaw chuck, Quick Change Toolpost, Digital Readout. S/No. 4/0008/00236
Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 6: Colchester Student 1800 Gap Bed Lathe
Colchester Student 1800 Gap Bed Lathe, 25” (635mm) Distance Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds, 3 Jaw Chuck, 4 Jaw Chuck, Quick Change Toolpost. S/No. 4/0008/00233
Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 7: Colchester Student 1800 Gap Bed Lathe
Colchester Student 1800 Gap Bed lathe, 25” (635mm) Distance Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds. 3 Jaw chuck, 4 Jaw chuck, Quick Change Toolpost. S/No. 4/0008/09537
Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 8: Colchester Student 1800 Gap Bed Lathe
Colchester Student 1800 Gap Bed Lathe, 25” (635mm) Distance
Between Centres, 13 ¼” (335mm) Swing over Bed, 8 ¼” (210mm) Swing
over Cross Slide, 19” (480mm) Swing in Gap, 4” D1 Camlock Spindle
Nose, 1 5/8” (40mm) Spindle Bore, 22 – 1800 RPM Spindle Speeds, 3
Jaw chuck, 4 Jaw chuck, Quick Change Toolpost. S/No. 4/0008/00230
Please Note: This lot is located in North Lanarkshire and
will be loaded free of charge to a suitable vehicle. Blocking and
securing will be at the cost of the purchaser.
Los 9: XYZ KR – V2000 (2 axis) CNC Turret Mill
XYZ KR – V2000 (2 axis) CNC Turret Mill with Protrak MX2, 1270m x 254mm, R8 Spindle Taper, 60 – 4200 RPM (1997)
Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 10: Bridgeport Series 1 2HP BR2J Turret Mill
Bridgeport Series 1 2HP BR2J Turret Mill, 1065 x 230mm Table
Area, R8 Spindle Taper, 50 – 3750 Variable Spindle Speeds, Variable
Feeds to Table, 2 Axis Digital Readout, Splash Guard, Coolant,
Light, Table Guards.
Please Note: Machine vice not included
Please Note: This lot is located in North Lanarkshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.