In Line Welex Coextrusion PS Line with Illig RDM 50K POT4 Cup Forming Machine with Mechanical Plug, RS75B Skeletal Grinder, Illig Stacker, 125mm Max Draw (1996)90mm Welex Single Screw Extruder. 30D Vented. 75kw Dc Motor. Water Cooled Barrel. Hydraulic Lantern Slide Screen Changer 1996, Welex 56/56 Gear Pump, 50mm Welex Coextruder, 24D Fan Cooled, Mounted on Pedestal (1996), Welex ABA Square Type Feedblock with Replaceable Insert, 860mm Wide Welex R75 Flexlip Sheet Die. 0-1.9mm Die Gap, 890mm X 300mm 3 Roll Polishing Stack. DC Motors. 3 Zone Pump Group with Heaters and Heat Exchangers, 2 Roll 890mm Wide Haul Off (1996), 500 X 280mm Illig Model RDM 50K Pressure Forming Machine with Mechanical Plug, RS75B Skeletal Grinder, Illig Stacker, 125mm Max Draw (1996) 71mm with Insert, Various Cavity and Inserts for different Depths (Pots)

Please Note: This Lot is Located in Swindon and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.

In Line Welex Coextrusion PS Line with Illig RDM 50K POT1 Cup Forming Machine with Mechanical Plug, RS75B Skeletal Grinder, Illig Stacker, 125mm Max Draw (1988), 90mm Welex Single Screw Extruder, 30D Vented, 75kw Dc Motor, Water Colled Barrel, Hydraulic Lantern Slide Screen Changer (1988), Welex 56/56 Gear Pump, 50mm Welex Coextruder, 24D Fan Cooled, Mounted on Pedestal (1988), Welex ABA Square Type Feedblock with Replaceable Insert, 860mm Wide Welex R75 Flexlip Sheet Die, 0-1.9mm Die Gap, 1040mm X 450mm 3 Roll Polishing Stack, DC Motors, 3 Zone Pump Group with Heaters and Heat Exchangers, 2 Roll 890mm Wide Haul Off (1988), 500 X 280mm Illig Model RDM 50K Pressure Forming Machine with Mechanical Plug, RS75B Skeletal Grinder, Illig Stacker, 125mm Max Draw (1988) 4 Pack Multi Pack Tool, Similar to a 4 Pack Yoghurt Pot.

Please Note: This Lot is Located in Swindon and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.

580mm Wide Illig RDM 58/3 In Line Extrusion and Lid Forming, 90mm Welex Extruder, 50mm Coex, 890mm X 300mm Calender, RDM 58/3 Former, Grinder (1989), 90mm Welex Single Screw Extruder, Model 350-30D. Vented, 75kw Bull Dc Motor, Water Cooled Barrel, Electrically Heated, 148rpm, Vented with Vacuum Pump (1996), 13 Zone Panel for Main Extruder Complete with 5 Zone for Co-Extruder, 120mm Hydraulic Lantern Slide Screen Changer, Welex Gear Pump, 50mm Welex Coextruder, 24D Fan Cooled, Mounted on Pedestal (1996), Welex ABA Square Type Feedblock with Replaceable Insert, 765mm Wide Welex Flexlip Sheet Die, 0-1.9mm Die Gap, 890mm X 300mm Model 12-12-12 35LH, 3 Roll Polishing Stack, DC Motor Drive, Silent Chain, 3 Zone Pump Group with Heaters, Heat Exchangers and Proportional Valves, Facility for Anti Stat Bath 2 Roll 890mm Wide Haul Off (1997), 500 X 280mm Illig Model RDM 58/3 (1989), Pressure Lid Forming Machine with Mechanical Plug, Top and Bottom Ceramic Heaters, 550x315mm Forming Area, 580mm Max Sheet Width, 50 Cycles Per Minute Maximum, Total Connected Load 50.85kw, Depth of Draw Female/Male Max 30mm, 71mm Tooling for Lids.

Please Note: This Lot is Located in Swindon and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the purchaser.