2624 - Welex Coextrusion PS Lines
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Swindon and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the
Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or
email: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-3 von 3
Los 1: In Line Welex Coextrusion PS Line with Illig RDM 50K POT4 Cup Forming Machine with Mechanical Plug, RS75B Skeletal Grinder, Illig Stacker, 125mm Max Draw (1996)
In Line Welex Coextrusion PS Line with Illig RDM 50K POT4 Cup Forming Machine with Mechanical Plug, RS75B Skeletal Grinder, Illig Stacker, 125mm Max Draw (1996)90mm Welex Single Screw Extruder. 30D Vented. 75kw Dc Motor. Water Cooled Barrel. Hydraulic Lantern Slide Screen Changer 1996, Welex 56/56 Gear Pump, 50mm Welex Coextruder, 24D Fan Cooled, Mounted on Pedestal (1996), Welex ABA Square Type Feedblock with Replaceable Insert, 860mm Wide Welex R75 Flexlip Sheet Die. 0-1.9mm Die Gap, 890mm X 300mm 3 Roll Polishing Stack. DC Motors. 3 Zone Pump Group with Heaters and Heat Exchangers, 2 Roll 890mm Wide Haul Off (1996), 500 X 280mm Illig Model RDM 50K Pressure Forming Machine with Mechanical Plug, RS75B Skeletal Grinder, ...
Los 2: In Line Welex Coextrusion PS Line with Illig RDM 50K POT1 Cup Forming Machine with Mechanical Plug, RS75B Skeletal Grinder, Illig Stacker, 125mm Max Draw (1988)
In Line Welex Coextrusion PS Line with Illig RDM 50K POT1 Cup Forming Machine with Mechanical Plug, RS75B Skeletal Grinder, Illig Stacker, 125mm Max Draw (1988), 90mm Welex Single Screw Extruder, 30D Vented, 75kw Dc Motor, Water Colled Barrel, Hydraulic Lantern Slide Screen Changer (1988), Welex 56/56 Gear Pump, 50mm Welex Coextruder, 24D Fan Cooled, Mounted on Pedestal (1988), Welex ABA Square Type Feedblock with Replaceable Insert, 860mm Wide Welex R75 Flexlip Sheet Die, 0-1.9mm Die Gap, 1040mm X 450mm 3 Roll Polishing Stack, DC Motors, 3 Zone Pump Group with Heaters and Heat Exchangers, 2 Roll 890mm Wide Haul Off (1988), 500 X 280mm Illig Model RDM 50K Pressure Forming Machine with Mechanical Plug, RS75B Skeletal ...
Los 3: 580mm Wide Illig RDM 58/3 In Line Extrusion and Lid Forming, 90mm Welex Extruder, 50mm Coex, 890mm X 300mm Calender, RDM 58/3 Former, Grinder (1989)
580mm Wide Illig RDM 58/3 In Line Extrusion and Lid Forming, 90mm Welex Extruder, 50mm Coex, 890mm X 300mm Calender, RDM 58/3 Former, Grinder (1989), 90mm Welex Single Screw Extruder, Model 350-30D. Vented, 75kw Bull Dc Motor, Water Cooled Barrel, Electrically Heated, 148rpm, Vented with Vacuum Pump (1996), 13 Zone Panel for Main Extruder Complete with 5 Zone for Co-Extruder, 120mm Hydraulic Lantern Slide Screen Changer, Welex Gear Pump, 50mm Welex Coextruder, 24D Fan Cooled, Mounted on Pedestal (1996), Welex ABA Square Type Feedblock with Replaceable Insert, 765mm Wide Welex Flexlip Sheet Die, 0-1.9mm Die Gap, 890mm X 300mm Model 12-12-12 35LH, 3 Roll Polishing Stack, DC Motor Drive, Silent Chain, 3 Zone Pump Group ...