Lot 2 & 2A Combination, 100 & 101 have the Buy Now facility - this will be removed on Sunday 20th August 2017 at 3.00pm. Please see individual lot for information.

Fixture

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Doosan Mynx 7500/50 Vertical Machining Centre with Fanuc Series i Control, Table Area: 1,600mm x 750mm, X = ,1520mm, Y = 760mm, Z = 610mm, Spindle Speeds: 6,000rpm, BT50 Spindle Nose, 40-Position Tool Changer, Main Motor: 25HP, Probe, Chiller & Swarf Conveyor.  S/No. M75000041 (04/2010) (Excluding Vice & 4th Axis Unit)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Nikken 4th Axis Unit with 400mm 3-Jaw Chuck

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Combination of lots 2 & 2A

Lot 2 - Doosan Mynx 7500/50 Vertical Machining Centre with Fanuc Series i Control, Table Area: 1,600mm x 750mm, X = 1520mm, Y = 760mm, Z = 610mm, Spindle Speeds: 6,000rpm, BT50 Spindle Nose, 40-Position Tool Changer, Nikken 4th Axis Unit with 400mm 3-Jaw Chuck, Main Motor: 25HP, Probe, Chiller & Swarf Conveyor. S/No. M75000041 (04/2010)

and

Lot 2A - Nikken 4th Axis Unit with 400mm 3-Jaw Chuck

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

This lot has the Buy Now facility - this will be removed on Sunday 20th August 2017 at 3.00pm.

Mazak E – Tower 5-Axis Multitasking Turning/Milling Machine with Matrix Control, Twin Vertical Chucks: 600mm diameter, X = 1,100mm, Y = 800mm, Z = 900mm, B-Axis: 150 Degrees, C-Axis: 360 Degrees, Speeds: 12,000rpm, 80-Position Toolchanger, Jet Coolant, (1) 600mm 4-Jaw Chuck & Chiller. S/No. 190766 (02/2007)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Steady Suitable for Doosan 400

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Giewont Vertical FYA41M Milling Machine, Table Size 2m x 400mm, 50 International Tooling. S/No. 11/57, (1985)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Pollard Multi Spindle Drill 31MX, Table Size 33” x 29”. Ref/No. 30444A

Please Note: This Lot is in need of repair

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Makita Bench Grinder. S/No. 17016E

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchase

Clarke Woodworker 6" Horizontal Belt Linisher

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Vanco 1" Vertical Belt Linisher

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Makita Bench Grinder

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

DEA Co-ordinated Measuring Machine, Table Size 650mm x 890mm. S/No. 00628

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mitutoyo FN905 Co-ordinated Measuring Machine, Table Size 1m x 750mm. S/No. 0706541

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty of Metric Micrometers & Verniers

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Set of Imperial Micrometers 0 – 1’ - 11 – 12’

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Set of Imperial Micrometers 0 – 1’ – 11 – 12’

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Set of Imperial Micrometers 0 – 1’ – 11 – 12’’

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty Imperial Micrometers
12 – 16’ x 3
30 – 30’ x 1

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Set of Metric Micrometers

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Depth Verniers & (2) Depth Micrometers

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Bench Center 32’’

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty of Horstmann Thread Gauges BSP, UNF, BSF, UNC & Metric

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

10-Drawer Cabinet with Plug Gauges

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty of Turning Tools, Carbide Tip Holders & Boring Bars

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

8-Drawer Cabinet with Drills Taps & Tips

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

(8) Boxes of Morse Taper Drills

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Large Qty Morse Taper Drills Reamers & Cutters

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Polstore 7-Drawer Cabinet with Drills & Taps

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

8’’ Machine Vice

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

8’’ Machine Vice

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

6’’ Swivel Machine Vice

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

6’’ Swivel Vice & Vice

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

4’’ Clamping Vice Vertical/Horizontal

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

6’’ Machine Vice

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

4’’ Clamping Vice Vertical/Horizontal

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

6’’ Table Vice

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

6’’ Machine Vice

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

T P S Hot Wire Cladding and Overlay – Inlay 160 HW Machine Face Plate 1000mm, Manual 3 Jaw chuck Mounted on Faceplate 36” diameter Capacity 160 HW, Auto Wire Feed, Arm Vertical Travel 1800mm, Arm Forward and Retraction Travel Estimate 1500mm

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

View photos for a copy of the original Purchase Invoice.

This lot has the Buy Now facility - this will be removed on Sunday 20th August 2017 at 3.00pm.

T P S Hot Wire Cladding and Overlay – Inlay 160 HW Machine Face Plate 1000mm, Capacity 160 HW, Auto Wire Feed, Arm Vertical Travel 1800mm, Arm Forward and Retraction Travel Estimate 1500mm

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

View photos for a copy of the original Purchase Invoice.

This lot has the Buy Now facility - this will be removed on Sunday 20th August 2017 at 3.00pm.

Mig 505 S/No. 94041166

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Parweld Water Recirculation System XTS902. S/No. 16010910123

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Nederman Extraction System FR452 N4A/3 RDO. S/No. 1352753

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

TT1000 Positioner, Table Size 13". S/No. TA111327594

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mitre Oven

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Electric Oven 100 Deg Celsius, Model G5 S/No. 90D132

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Steel Plate 4ft x 3ft

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Brady UK Jib Crane, Demag Hoise 250kg. 5m x 4m High Approx. S/No. B596

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

GBAT Jib Crane, Stahl Hoist Capacity 1000KG, 3m length x 3.5m High Approx. S/No. 055187001 (2007)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Norcrane Jib Crane, Demag Hoist SWL 250kg, 2.7m length x 3m high approx. S/No. T48177

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Jib Crane, Abus Hoist SWL 1 Ton, 3m length x 3.1m High Approx. S/No. 1270

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Python Jib Crane, GLS Hoist SWL 100kg, 4m length x 3m high approx. S/No. 1262

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Jib Crane, Donati Hoist 2000kg. 3.3m length x 3.5m high approx.

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Jib Arm, Demag Hoist SWL 125kg, 2.6m Length Approx. S/No. E768

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Jib Arm, Stahl Hoist SWL 125kg, 3m length Approx. S/No. 148175

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Jib Arm, Verlinde Manual Hoist SWL 500kg, 3.5m length Approx. S/No. T48176

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Eclipse Magnetic Lift, SWL 250kg. S/No. 32822.12

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Magnetic Lift. S/No. B2089.12

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Magnetic Lift, 125kg. S/No. A 130 2.12

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Clarke Strong Arm 10 Ton Fast Action Body Repair Kit

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser