2605 - High Quality CNC Machining Centres & Lathes plus other Toolroom Equipment previously used by Jordan Engineering Ltd, Phase 2
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at a cost of the purchaser.
Lot 2 & 2A Combination, 100 & 101 have the Buy Now facility - this will be removed on Sunday 20th August 2017 at 3.00pm. Please see individual lot for information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the
Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email
us at:
info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 87
Lot 1B: Fixture
Fixture
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 2: Doosan Mynx 7500/50 Vertical Machine Centre
Doosan Mynx 7500/50 Vertical Machining Centre with Fanuc Series i Control, Table Area: 1,600mm x 750mm, X = ,1520mm, Y = 760mm, Z = 610mm, Spindle Speeds: 6,000rpm, BT50 Spindle Nose, 40-Position Tool Changer, Main Motor: 25HP, Probe, Chiller & Swarf Conveyor. S/No. M75000041 (04/2010) (Excluding Vice & 4th Axis Unit)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2A: Nikken 4th Axis Unit with 400mm 3-Jaw Chuck
Nikken 4th Axis Unit with 400mm 3-Jaw Chuck
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 2 & 2A
Combination of lots 2 & 2A
Lot 2 - Doosan Mynx 7500/50 Vertical Machining Centre with Fanuc Series i Control, Table Area: 1,600mm x 750mm, X = 1520mm, Y = 760mm, Z = 610mm, Spindle Speeds: 6,000rpm, BT50 Spindle Nose, 40-Position Tool Changer, Nikken 4th Axis Unit with 400mm 3-Jaw Chuck, Main Motor: 25HP, Probe, Chiller & Swarf Conveyor. S/No. M75000041 (04/2010)
and
Lot 2A - Nikken 4th Axis Unit with 400mm 3-Jaw Chuck
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
This lot has the Buy Now facility - this will be removed on Sunday 20th August 2017 at 3.00pm.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 2 | Doosan Mynx 7500/50 Vertical Machine Centre |
| 2A | Nikken 4th Axis Unit with 400mm 3-Jaw Chuck |
Lot 5: Mazak E – Tower 5 Axis Multitasking Turning / Milling Machine
Mazak E – Tower 5-Axis Multitasking Turning/Milling Machine with Matrix Control, Twin Vertical Chucks: 600mm diameter, X = 1,100mm, Y = 800mm, Z = 900mm, B-Axis: 150 Degrees, C-Axis: 360 Degrees, Speeds: 12,000rpm, 80-Position Toolchanger, Jet Coolant, (1) 600mm 4-Jaw Chuck & Chiller. S/No. 190766 (02/2007)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 10A: Steady Suitable for Doosan 400
Steady Suitable for Doosan 400
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 14: Giewont Vertical FYA41M Milling Machine
Giewont Vertical FYA41M Milling Machine, Table Size 2m x 400mm, 50 International Tooling. S/No. 11/57, (1985)
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser
Lot 15: Pollard Multi Spindle Drill 31MX
Pollard Multi Spindle Drill 31MX, Table Size 33” x 29”. Ref/No.
30444A
Please Note: This Lot is in need of repair
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Lot 20: Makita Bench Grinder
Makita Bench Grinder. S/No. 17016E
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchase
Lot 21: Clarke Woodworker 6" Horizontal Belt Linisher
Clarke Woodworker 6" Horizontal Belt Linisher
Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser