Mazak Integrex E – Tower 1060VII CNC Turning/Milling Machine with Mazatrol Matrix Voice Control, Tooleye, 5-Axis Head, X,Y, Z, B, C Axes, Twin Pallet each with 1m Chuck, Renishaw Probe, Swarf Conveyor, 120 Station Tool Changer, Tipping Skip, S/No. 198592 (10/2007)

Tooling included with the sale of this machine; 15 x Capto Tools

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Hankook VTC160E Vertical Turning Centre with Fanuc 3Li Control, A, X, Z, U, W, Axes, 1600mm Chuck, Auto Clamp, 2m Swing, 1.4m Height, ATC 24 Tools, Tooleye, Swarf Conveyor, S/No. 42009215 (2011)

Tooling included with the sale of this machine; 9 x Turning Tools & 10 x BT50 Tools

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Axe & Status Massa VL 1200 ATG - 0 Vertical Lathe with Fanuc 18i TB Control, 1200mm Chuck, X, Y, C Axes, ATC 24, 6 Tools, S/No. 2540 (03/2008)

Tooling included with the sale of this machine; 6 x pieces of Rigid Tooling & 4 x Auto Clamps

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan VTS 1620M Vertical CNC Lathe with Fanuc i Control, Chuck Size 1.6m, 24-ATC Tool Changer, 17 Tools, Swarf Conveyor, Tipping Skip, S/No. VT160M0022 (08/2011)

Tooling included with the sale of this machine; 15 x Pieces of Rigid Tooling, 1 x 4 Jaws & 1 x 3 Jaws

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time) specifically lots 500 to 509B

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan VTS 1620M Vertical CNC Lathe with Fanuc i Series Control, X, Y, C Axes, Chuck Size 1.6m, 24-Station Tool Changer, Swarf Conveyor, Tipping Skip, S/No. MT0038000032 (01/2012)

Tooling included with the sale of this machine; 10 x Pieces of Rigid Tooling, 1 x 4 Jaws, 1 x 3 Jaws

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time) specifically lots 500 to 509B

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan Puma VTS1620M Vertical Turning Centre with Fanuc i Series Control, X, Z, A, C Axes, Probe, 2m Table, 24 Station ATC, FSE Swarf Management, Chuck Size 1.6m, Swarf Conveyor, Tipping Skip, S/No. MT0038-000060 (05/2013)

Run Time: 4761 hours, 32 mins. Cutting Time: 3400 hours, 18 mins

Tooling included with the sale of this lot; 16 pieces of Rigid Tooling, 1 x 4 Jaws & 1 x 3 Jaws

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time) specifically lots 500 to 509B

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan Puma VTS1620M Vertical Turning Centre with Fanuc i Series Control, X, Z, A, C Axes, Tool Sensor, FSE Management System, Chuck Size 1.6m, 24 Station ATC, S/No. MT0038-000081 (03/2014)

Tooling included with the sale of this machine; Qty 11 x Standard Tooling, 1 x 4 Jaws & 1 x 3 Jaws

Run Time: 1382 hours, 3 mins. Cutting Time: 1104 hours, 40 mins

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time) specifically lots 500 to 509B

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan Puma VTS1620M Vertical Turning Centre with Fanuc i Series Control, X, Z, A, C Axes, Tool Sensor, FSE Management System, Chuck Size 1.6m, 24 Station ATC, S/No. MT0038-000084 (07/2014)

Tooling included with the sale of this machine; Qty 10 x Standard Tooling, 1 x 4 Jaws, 1 x 3 Jaws

Run Time: 1600 hours, 3 mins. Cutting Time: 964 hours, 2 mins

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time) specifically lots 500 to 509B

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan VT900 2SP Vertical Turning Centre with Fanuc 3Li Control, Swarf Conveyor, Filtermist, X & Y Axes, (2) 32" Chucks, (2) 12 Station Turrets, Tooleye, Tipping Skip, S/No. MT0030-001051 (03/2014),

Tooling included with the sale of this machine; Qty of Standard Tooling and Qty of Jaws

Run Time: 273 hours, 17 mins. Cutting Time: 230 hours, 29 mins

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan Puma 700 XLM CNC Turning Centre, 5m between Centres, X, Z Axes, 32" Chuck, 800mm 4-Jaw Chuck, Tooleye, Swarf Conveyor. S/No. ML0167-000051 (12/2013)

Tooling included with the sale of this machine; 1 x K5-MSW Hydraulic Steady - Range; 80 - 390. S/No. 0633, 1 x K5-MSW Hydraulic Steady - Range; 80 - 390. S/No. 0647, 1 x Telbrook T-12063 Steady - Range; 390 - 700, 2 x Live Tooling, Qty Standard Tooling & 2 x Sets of Jaws

Run Time: 129 hours, 44 mins. Cutting Time: 3109 hours, 56 mins

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time) specifically lots 510 to 515

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan Puma 700LY X3M CNC Turning Centre with Fanuc 32iB Control, 3.2m between Centres, X, Y, Z, C Axes, 32" CNC Turning Centre Chuck, 12 Station Turret, Tooleye, Swarf Conveyor, Tipping Skip, S/No. ML0235-000051 (09/2013)

Tooling included with the sale of this machine; 1 x K5-MSW Hydraulic Steady, Range 80-390. S/No. 0637 & 1 x Telbrook T12063 Steady, Range; 390 - 700, 3 x Live Tooling, Qty Standard Tooling, 2 x Sets of Jaws, Spare 4-Jaw Chuck - 800mm diameter. S/No. 12527

Run Time: 566 hours, 40 mins. Cutting Time: 3778 hours, 52 mins

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time) specifically lots 510 to 515

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan Puma 700LM CNC Turning Centre with Fanuc 32i Control, 3.2m between Centres, 32" Chuck, Swarf Conveyor, X, C Axes, 12 Station Turret, Tooleye, Tipping Skip, S/No. ML0161-001159 (01/2013)

Tooling included in the sale of this machine; 1 x K5-MSW Hydraulic Steady - Range; 80 - 390. S/No. 0575 & 1 x Telbrook T-12065 Steady, Range; 390 - 700, 2 x Live Tooling, Qty Standard Tooling, Spare 4-Jaw Chuck - 800mm diameter. S/No. 10485

Run Time: 465 hours, 35 mins. Cutting Time: 5495 hours, 20 mins.

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time) specifically lots 510 to 515

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan Puma 480L CNC Turning Centre with Fanuc 32i Control, Hydraulic Steady, 10 Station Turret, 21” 3 Jaw Chuck, Tooleye, Swarf Conveyor, Tipping Skip. S/No. ML0146-000499 (07/2014)

Tooling included in the sale of this machine; Telbrook T-13087 Steady & Qty Standard Tooling

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan Puma 2600 SY Turning Centre with Fanuc i Series Control, Main Spindle: 8" Chuck, Sub-spindle: 7" Chuck, X, Y, Z, C, B Axes, 24 Station Turret, Swarf Conveyor, Tipping Skip, Tooleye. S/No. ML0106-000563 (05/2015)

Tooling included with the sale of this machine; Qty 3 x Live Tooling & Qty Standard Tooling

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan Puma 2600 SY Turning Centre with Fanuc i Series Control, Main Spindle: 8" Chuck, Sub-spindle: 7" Chuck, X, Y, Z, C, B Axes, 24 Station Turret, Tooleye, Swarf Conveyor, Tipping Skip. S/No. L0106-000528 (12/2014)

Tooling included with the sale of this machine; Qty x 3 Live Tooling & Qty Standard Tooling

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan 2600LM Turning Centre with Fanuc i Series Control, Tooleye, Parts Catcher, Swarf Conveyor, 10” 3 Jaw Chuck, X, Z, C Axes, 24 Station Turret, Tipping Skip, S/No. P260LM0059 (06/2010)

Tooling included with the sale of this machine; Qty 2 x Live Tooling

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan Puma 2600 Lathe with Fanuc Series i Control, Tooleye, Parts Catcher, Swarf Conveyor, 10” 3 Jaw Chuck, 12 Station Turret, Tipping Skip, S/No P26000047

Tooling included with the sale of this machine; Qty Standard Tooling

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan Lynx 220 Turning Centre with Fanuc i Series Control, Tooleye, Swarf Conveyor, Collet Chuck, Parts Catcher, 12 Station Turret, Tipping Skip. S/No. ML0014-005382 (2012)

Tooling included with the sale of this machine; Large Qty of Collets & Tooling as shown in the Turret on the photographs

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Hydrafeed Multifeed MX-1B Barfeed

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Doosan VC630/5AX Machining Centre with Heidenhain iTNC 530 Control, Swarf Conveyor, 60 Station Tool Changer, Through Spindle Coolant, Table Size 600mm x 600mm, Renishaw Probe & Tool Sensor. S/No. MV0043000265 (2014)

Tooling included with the sale of this machine; Qty of BT40 Tooling

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Doosan VC630/5AX Machining Centre with Heidenhain iTNC 530 Control, Swarf Conveyor, 60 Station Tool Changer, Through Spindle Coolant, Table Size 600mm x 600mm, Renishaw Probe & Tool Sensor. S/No. MV0043000343 (11/2014)

Tooling included with the sale of this machine; Qty of BT40 Tooling

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

HAAS VF11 50/CE Vertical Machining Centre with HAAS Control, X, Y, Z Axes, Renishaw Probe, Tool Sensor, 30 Station ATC, S/No. 1065888 (04/2008)

Tooling included with the sale of this machine; Qty of BT50 Tools

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

5 Axis Table

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Combination of Lots 222 & 222A

HAAS VF11 50/CE Vertical Machining Centre with HAAS Control, X, Y, Z Axes, Renishaw Probe, Tool Sensor, 30 Station ATC, S/No. 1065888 (04/2008)

Tooling included with the sale of this machine; 10 x BT50 Tools

and;

Lot 222A - 5 Axis Table

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

HAAS Large 4th Axis Unit

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mazak FH 6800 Horizontal Machining Centre with Fusion 640 Control, 120-Station ATC, Pallet Size 630mm x 630mm, Swarf Conveyor, Tipping Skip, S/No. 147197 (02/2000)

Tooling included with the sale of this machine; Qty of CAT 50 Tooling shown in the Magazine on the machine

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Mazak FH 6800 Horizontal Machining Centre with Fusion 640 Control, 120-ATC, Pallet Size 630mm x 630mm, Swarf Conveyor, Tipping Skip, S/No. 148399 (2000)

Tooling included with the sale of this machine; Qty of CAT50 Tooling shown in the Magazine on the machine

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Mazak FH 5800 Twin Pallet Horizontal Machining Centre with Fusion 640 Control, 80-ATC, Swarf Conveyor, Pallet Size 500mm x 500mm, S/No. 150947 (08/2000)

Tooling included with the sale of this machine; Qty of CAT40 Tooling

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Mazak FH 5800 Twin Pallet Horizontal Machining Centre with Fusion 640 Control, 80-ATC, Swarf Conveyor, Pallet Size 500mm x 500mm, S/No. 252148848 (05/2000)

Tooling included with the sale of this machine; Qty of CAT 40 Tools

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

(3) Mazak FH-5800 22 Pallet Horizontal Machining Cell to include:

Mazak FH-5800 22 Pallet Horizontal Machining Cell with PC Fusion 640M Control, 120-ATC, Pallet Size 500mm, Swarf Conveyor, Tipping Skip, S/No. 157918 (08/2001)

Mazak FH-5800 22 Pallet Horizontal Machining Cell with PC Fusion 640M Control, 120-ATC, Pallet Size 500mm, Swarf Conveyor, Tipping Skip, S/No. 157917 (08/2001)

Mazak FH-5800 22 Pallet Horizontal Machining Cell with PC Fusion 640M Control, 120-ATC, Pallet Size 500mm, Swarf Conveyor, Tipping Skip, S/No. 157919 (08/2001)

Mazak 22-Pallet Pool Palletech with Mazak Robot

Tooling included with the sale of this machine; Large Qty CAT40 Tooling

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Fixture 500mm x 500mm with Machine Vice and 8" 3 Jaw Chuck

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tomb Stone 500mm x 500mm

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tomb Stone 500mm x 500mm

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tomb Stone 500mm x 500mm

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tomb Stone 500mm x 500mm with Multi-chuck Fixture, 8" 3 Jaw Chuck

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Fixture 500mm x 500mm with Machine Vice and 5" Chuck

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Fixture 500mm x 500mm 

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Fixture 500mm x 500mm

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Fixture 500mm x 500mm

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tombstone 500mm x 500mm

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tomb Stone 450mm x 450mm with Machine Vice

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Fixture Size 450mm x 450mm with 4 Machine Vices

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Lot 227A - Fixture 500mm x 500mm with Machine Vice and 8" 3 Jaw Chuck

Lot 227B - Tomb Stone 500mm x 500mm

Lot 227C - Tomb Stone 500mm x 500mm

Lot 227D - Tomb Stone 500mm x 500mm

Lot 227E - Tomb Stone 500mm x 500mm

Lot 227F - Fixture 500mm x 500mm with Machine Vice 

Lot 227G - Fixture 500mm x 500mm

Lot 227H - Fixture 500mm x 500mm

Lot 227I - Fixture 500mm x 500mm

Lot 227J - Tombstone 500mm x 500mm

Lot 227K - Tomb Stone 450mm x 450mm with Machine Vice

Lot 227L - Fixture Pallet Size 450mm x 450mm with 4 Machine Vices

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mazak H630 6-Pallet Horizontal Machining Centre with Mazatrol M32 Control, 80-ATC, Pallet Size 630mm x 630mm, Swarf Conveyor, Tipping Skip, Loading Station. S/No. 101877 (1991)

Tooling included with the sale of this machine; Qty of Tooling shown in the Magazine on the machine

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm (UK Time).

Please also view our other auctions ending next week - we have 6 auctions ending on Wednesday 7th & Thursday 8th December -  3 auctions each day at 1pm, 2pm & 3pm

Fixture

Please Note: This lot does not include the pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tombstone, Base size 630mm x 630mm and Machine Vice

Please Note: This lot does not include the Pallet.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Pallet 630mm x 630mm

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Fixtures 800mm x 800mm, 630mm x 630mm, 500mm x 500mm and 12" 3 Jaw Chuck 

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Fixture 630mm x 630mm

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

To inlcude:

Lot 228A - Fixture

Lot 228B - Tombstone, Pallet size 630mm x 630mm and Machine Vice

Lot 228C - Fixture 630mm x 630mm

Lot 228D - Fixtures 800mm x 800mm, 630mm x 630mm, 500mm x 500mm and 12" 3 Jaw Chuck 

Lot 228E - Fixture 630mm x 630mm

Please Note: These Lots are located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Charmilles Agie Cut 20P Wire EDM Machine X, Y, Z Axes, S/No. 3969001150527 (2013)

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mitsubishi FA30 Wire Eroder, X, Y, U, V, Z Axes, Working Area 900mm x 110mm x 650mm Depth, S/No. 04F3V040 (2004)

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Castek Mechantron HK-24 EDM, Table Size 450mm x 260mm, S/No. 9024078 (2002)

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Anti Vibration Boring Bar 1.2m

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Anti Vibration Boring Bar 1.2m

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Anti Vibration Boring Bar 900mm

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Anti Vibration Boring Bar 900mm

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Anti Vibration Boring Bar 900mm

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Anti Vibration Boring Bar 900mm

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Anti Vibration Boring Bar 700mm

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.