3503A - On behalf of Electrolux S.r.l. we are offering a selection of refrigeration manufacturing equipment due to investment in new machinery
In Association With
Artikelbeschreibung
COMI SL2000 x 900 x 550mm Thermoforming Machine (1995), UNIMAC Inner Line Punching Machine (2013), IRS Performance Test Carousel (2016), MSK Covertech Tension Tech Stretch Hood Wrapping Machine (2011)
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
Auktion endet am
Käuferprovision
Es gilt ein Aufgeld von 18%.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 22.00%.
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Location
Susegana, Treviso, Italy
Gebühr für die Ausfuhr
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55.00 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Sie müssen sich einloggen, um bieten zu können
Lose 1-4 / 4
Lot 50: COMI SL2000 x 900 x 550mm Thermoforming Machine (1995)
COMI SL2000 x 900 x 550mm Thermoforming Machine. S/No. 646 (1995)
|
TECHNICAL DATA OF THE EQUIPMENT |
|
|
Max. frame inner size mm 2005 x 905 |
Scrap cutter motor power kW 3 |
|
Max. tool base size mm 2000 x 900 |
Scrap conveyor motor power kW 0.37 |
|
Min. tool base size mm 700 x 500 |
Finished workpiece discharge belt motor power kW 0.75 |
|
Max. sheet size mm 2090 x 960 |
Cross-cutting motor power kW 0.25 |
|
Min. sheet size mm 790 x 560 |
Cross-cut scrap conveyor motor power kW 0.22 |
|
Max. tool height mm 800 (550+250) |
Transfer unit motor power kW 1.5 |
|
Maximum formed workpiece height mm 550 |
Auxiliary units max. consumption kW 5.10 |
|
Max. sheet stack height mm 1000 |
Max. installed power kW 375 |
|
Max. pallet height mm 180 |
Tempering unit power kW 52 |
|
Upper heating power kW 83.3 |
Power consumption at 70% load kW 262.5 |
|
Lower heating power kW 71.3 |
Vacuum pumps capacity m3/h 750 (250x3) |
|
Upper preheating power kW 52 |
Tool vacuum tank capacity L 2000 |
|
Lower preheating power kW 46.8 |
Bell vacuum tank capacity L 2000 |
|
Oil pump motor power kW 19 (15+4) |
Required oil quantity L 600 |
|
Vacuum pump motor power kW 23.4 (7.8x3) |
Required air pressure kPa 600 |
|
Sheet centering motors power kW 0.24 (0.12+0.12) |
Incoming water pressure kPa 200-300 |
|
Sheet feed motor power kW 2.2 |
Max. hydraulic operating pressure MPa 18 |
|
Sheet feed width-adjustment motor power kW 2.2 |
Hydraulic operating pressure MPa 10 |
|
Sheet picker motor power kW 0.37 |
Incoming water temperature °C 12-20 |
|
|
|
Lot 51: UNIMAC Inner Line Punching Machine (2013)
UNIMAC Inner Line Punching Machine (2013), Table Dimensions 2000 x 900 x 600mm, Cycle Time 30 Seconds
Lot 63: IRS Performance Test Carousel (2016)
IRS Performance Test Carousel (2016), Cycle Time 60 mins, 118 Stations, Wifi Test, Vahle KSL 5/200 Hs Power Rail
Lot 77: MSK Covertech Tension Tech Stretch Hood Wrapping Machine (2011)
MSK Covertech Tension Tech Stretch Hood Wrapping Machine. S/No. 371-3 (2011)
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.