2848 - Doosan Puma V550M CNC Vertical Turning Lathes
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Oakham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
from 6th to 16th January 2020
(There will be no clearance on site between 18th December 2019 and 3rd January 2020 inclusive)
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-2 von 2
Los 1: Doosan Puma V550M CNC Vertical Turning Lathe
Doosan Puma V550M CNC Vertical Turning Lathe with Fanuc 32i-Model A Control, C-Axis, Driven Tools, Swarf Conveyor, Coolant Tank. S/No. MT0015-000417 (2011)
Please Note: This lot is located in Oakham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 2: Doosan Puma V550M CNC Vertical Turning Lathe
Doosan Puma V550M CNC Vertical Turning Lathe with Fanuc 21i-TB Control, C-Axis, Driven Tools, 18” 3-Jaw Chuck, Swarf Conveyor, Coolant Tank. S/No. 3V150201 (2004)
Please Note: This lot is located in Oakham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.