2842 - Exeron HSC-Line Digma 5-Axis Machining Centre
Artikelbeschreibung
Exeron HSC-Line Digma 5-Axis Machining Centre with Rotary Table Surface 460mm Diameter
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
Auktion endet am
Montag 18 Nov 2019 at 04:00 PM GMT
Käuferprovision
Es gilt ein Aufgeld von 18.00%.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00%.
Datum der letzten Zahlung
Mittwoch 20 Nov 2019 at 05:00 PM GMT
Endgültiges Freigabedatum
Donnerstag 5 Dez 2019 at 05:00 PM GMT
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Location: This lot is located in Stirling. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Sie müssen sich einloggen, um bieten zu können
Auktion endet am
Montag 18 Nov 2019 at 04:00 PM GMT
Käuferprovision
Es gilt ein Aufgeld von 18.00%.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00%.
Datum der letzten Zahlung
Mittwoch 20 Nov 2019 at 05:00 PM GMT
Endgültiges Freigabedatum
Donnerstag 5 Dez 2019 at 05:00 PM GMT
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-1 / 1
Lot 100: Exeron HSC-Line Digma 5-Axis Machining Centre
Exeron HSC-Line Digma 5-Axis Machining Centre, Rotary Table
Surface 460mm Diameter, Traverses: X = 800mm. Y = 800mm. Z = 500mm,
C (Table Rotation) = 360 deg, B (Table Tilt) 105 deg, Milling
Spindle Nose HSK 50, Max Spindle Speed 42,000RPM, Spindle HVC 150,
27-Position Tool-Changer, Infrared caliper Renishaw (Laser Tool
Setter), Tool Length Measuring, Tool Diameter Measuring
Electronic Hand-Wheel, Cooling Aggregate, Graphite
Preparation (2006)
The machine was fully serviced/overhauled in 2015 by Exeron with new ball screws being fitted, the machine realigned with a ball bar and the 5 axis unit fully checked and realigned plus a standard PM service and grease etc.
Please Note: This lot is located in Stirling. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.