Los 100: Exeron HSC-Line Digma 5-Axis Machining Centre
| Make: | Exeron |
|---|
Video
Exeron HSC-Line Digma 5-Axis Machining Centre, Rotary Table
Surface 460mm Diameter, Traverses: X = 800mm. Y = 800mm. Z = 500mm,
C (Table Rotation) = 360 deg, B (Table Tilt) 105 deg, Milling
Spindle Nose HSK 50, Max Spindle Speed 42,000RPM, Spindle HVC 150,
27-Position Tool-Changer, Infrared caliper Renishaw (Laser Tool
Setter), Tool Length Measuring, Tool Diameter Measuring
Electronic Hand-Wheel, Cooling Aggregate, Graphite
Preparation (2006)
The machine was fully serviced/overhauled in 2015 by Exeron with new ball screws being fitted, the machine realigned with a ball bar and the 5 axis unit fully checked and realigned plus a standard PM service and grease etc.
Please Note: This lot is located in Stirling. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Location: This lot is located in Stirling. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.