Please click here to view a Brochure for this Auction

WFL M35-G 1800 7 Axis Millturn with CNC Siemens 840D SL Control, Maximum Swing Over Bed 600mm, Maximum Swing Over Saddle 520mm, Maximum Distance Between Centres 1800mm, Maximum Turned Diameter 520mm, Maximum Turned Length 1500mm, B1 Rotation -110, +110 Degrees, C1 Rotation 360,000 Degrees, C2 Rotation 360,000 Degrees, X1 Traverse 600mm, Y1 Traverse 250mm, Z1 Traverse 1500mm, Z2 Traverse 1500mm, Z4 Traverse 1510mm, Rapids X1 30m/min, Y1 15m/min, Z1 & Z2 40m/min, B1 138 Degrees /Sec, Spindle Bore 77mm, Turning speeds With Chuck 3300 rpm, Turning Speed Without Chuck 4000 rpm, Milling Spindle Speeds 9000rpm, with 325mm Headstock Chuck SMW Autoblock 3 Jaw Hydraulic, 325mm Tailstock Chuck SMW Autoblock 3 Jaw Hydraulic, Tooling Type Capto C6, 80 Position ATC, Marposs WR1, SHW 3 Point Hydraulic Steady, Model SR-5-ZSW, 45 – 310mm Capacity, SHW 3 Point Hydraulic Steady, Model SLU-X-2ZS, 8 – 101mm Capacity, Manuals, Swarf Conveyor, Swarf Skip, High Pressure Coolant, Paper Filtration Unit, Electrics 400v, 3ph, 50 Hz, Spindle Motor 29/33kw, Sub Spindle Motor 29/33kw, Milling Spindle Motor 15/20kw, Approximate Dimensions: 7500 x 3700 x 2950mm, Approximate Weight 20,000kg. S/No 34154901 (2012) 

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

SMW Autoblok Hydraulic Steady Suitable for WFL Millturn

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

WRP45 Marposs Probe

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of lots 1, 1A, & 1B

1 - WFL M35-G 1800 7 Axis Millturn with CNC Siemens 840D SL Control, Maximum Swing Over Bed 600mm, Maximum Swing Over Saddle 520mm, Maximum Distance Between Centres 1800mm, Maximum Turned Diameter 520mm, Maximum Turned Length 1500mm, B1 Rotation -110, +110 Degrees, C1 Rotation 360,000 Degrees, C2 Rotation 360,000 Degrees, X1 Traverse 600mm, Y1 Traverse 250mm, Z1 Traverse 1500mm, Z2 Traverse 1500mm, Z4 Traverse 1510mm, Rapids X1 30m/min, Y1 15m/min, Z1 & Z2 40m/min, B1 138 Degrees /Sec, Spindle Bore 77mm, Turning speeds With Chuck 3300 rpm, Turning Speed Without Chuck 4000 rpm, Milling Spindle Speeds 9000rpm, with 325mm Headstock Chuck SMW Autoblock 3 Jaw Hydraulic, 325mm Tailstock Chuck SMW Autoblock 3 Jaw Hydraulic, Tooling Type Capto C6, 80 Position ATC, Marposs WR1, SHW 3 Point Hydraulic Steady, Model SR-5-ZSW, 45 – 310mm Capacity, SHW 3 Point Hydraulic Steady, Model SLU-X-2ZS, 8 – 101mm Capacity, Manuals, Swarf Conveyor, Swarf Skip, High Pressure Coolant, Paper Filtration Unit, Electrics 400v, 3ph, 50 Hz, Spindle Motor 29/33kw, Sub Spindle Motor 29/33kw, Milling Spindle Motor 15/20kw, Approximate Dimensions: 7500 x 3700 x 2950mm, Approximate Weight 20,000kg. S/No 34154901 (2012) 

1A - SMW Autoblok Hydraulic Steady Suitable for WFL Millturn

1B - WRP45 Marposs Probe

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

WFL M35-G 1800 7 Axis Millturn with CNC Siemens 840D SL Control, Maximum Swing Over Bed 600mm, Maximum Swing Over Saddle 520mm, Maximum Distance Between Centres 1800mm, Maximum Turned Diameter 520mm, Maximum Turned Length 1500mm, B1 Rotation -110, +110 Degrees, C1 Rotation 360,000 Degrees, C2 Rotation 360,000 Degrees, X1 Traverse 600mm,Y1 Traverse 250mm, Z1 Traverse 1500mm, Z2 Traverse 1500mm, Z4 Traverse 1510mm, Rapids X1 30m/min, Y1 15m/min, Z1 & Z2 40m/min, B1 138 Degrees /Sec, Spindle Bore 77mm, Turning speeds With Chuck 3300 rpm, Turning Speed Without Chuck 4000 rpm, Milling Spindle Speeds 9000rpm, Complete With 325mm Headstock Chuck SMW Autoblock 3 Jaw Hydraulic, 325mm Tailstock Chuck SMW Autoblock 3 Jaw Hydraulic, Tooling Type Capto C6, Complete With 80 Position ATC, Marposs WR1 SHW 3 Point Hydraulic Steady, Model SR-5-ZSW, 45 – 310mm Capacity, Manuals, Swarf Conveyor, Swarf Skip, High Pressure Coolant, Paper Filtration Unit, Electrics 400v, 3ph, 50 Hz, Spindle Motor 29/33kw, Sub Spindle Motor 29/33kw, Milling Spindle Motor 15/20kw, Approximate Dimensions 7500 x 3700 x 2950mm, Approximate Weight 20,000kg. S/No. 34150901 (2006)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mazak Slanturn 50NR CNC Lathe with Mazatrol 640T CNC Control, Swing Over Bed 805mm, Swing Over Saddle 560mm, Distance Between Centres 2000mm, Spindle Speeds 1 – 1600rpm, Spindle Bore 104mm, X Axis Traverse 574mm, Z Axis Traverse 2000mm, Rapids ,X Axis 12m/min, Z 16m/min, with 10 Position Turret, 2 Point Hydraulic Steady, Programmable Tailstock, 385mm 3 Jaw Hydraulic Chuck, Swarf Conveyor, Approximate Dimensions 5815 x 2665 x 2725mm, Approximate Weight 14,000kg. S/No. 193247 (2007)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

DMG CTX 510 Ecoline 3 Axis CNC Lathe with Siemens 810D and Shop Turn CNC Control, Swing Over Bed 680mm, Swing Over Saddle 465mm, Maximum Turned Length 1050mm, Spindle Speeds 32 – 3250rpm, Driven Tooling Speeds 4000rpm, Rapids 30m/min, with C Axis, Driven Tooling, 12 Position Turret, 315mm 3 Jaw Hydraulic Chuck, Programmable Tailstock, Tool Probing, Swarf Conveyor, Approximate Dimensions 5250 x 2300 x 2000mm, Approximate Weight 8100kg. S/No. 8045000336E (2011)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

VDI 40 Live Tooling & VDI Tooling suitable for Capto Tooling and Suitable for DMG CTX 510 Eco.

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Haco FAT TUR 930MN CNC Lathe with Siemens Shop Turn CNC Control, Swing Over Bed 950mm, Swing Over Saddle 630mm, Maximum Distance Between Centres 4000mm, Spindle Speeds 4 1200rpm, Spindle Bore 320mm, Rapids 6m/min, Compete with 2 No 3 Point Fixed Steadies, Boring Bar Steady, 8 Position Duplomatic Turret, Powered Tailstock, Deep Hole Boring Bar, Swarf Conveyor, Main Motor 33kw, Approximate Dimensions 6400 x 2890 x 2170mm, Approximate Weight 10,200kg. S/No. 120452 (2012)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

VDI Capto 50 Tooling

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Doosan 670L 2 Axis CNC Lathe with Fanuc 18i-TB CNC Control, Swing Over Bed 910mm, Swing Over Saddle 670mm, Maximum Distance Between Centres 1850mm, Maximum Turned Length 1800mm, Spindle Speeds 15 – 1500rpm, Spindle Bore 152mm, Feeds 0.001 – 500mm/rev, Rapids 16m/min, Complete With 12 Position Turret, Tool Probing, 2 Point Hydraulic Steady, Swarf Conveyor, Approximate Dimensions 5150 x 2355 x 2150mm, Approximate Weight 14,000kg. S/No. LNL-1056 (2005)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lathe Tooling suitable for Doosan 670L 2 & Capto Tooling

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Daewoo Puma 400B 2 Axis CNC Lathe with Fanuc 21i-TB CNC Control, Swing Over Bed 700mm, Swing Over Saddle 480mm, Max Turned Diameter 550mm, Max Turned Length 1050mm, X Axis Traverse 362mm, Z Axis Traverse 1105mm, Distance Between Centres 1100mm, Spindle Speeds 20 – 2000rpm, Spindle Bore 132mm, Swarf Conveyor, 380mm 3 Jaw Hydraulic Chuck, 10 Position Turret, Tool Probing, Approximate Dimensions 5700 x 2200 x 2050mm, Approximate Weight 8200kg. S/No. PM352725 (2007)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Daewoo Puma 400B 2 Axis CNC Lathe with Fanuc 18i-T CNC Control, Swing Over Bed 700mm, Swing Over Saddle 480mm, Max Turned Diameter 550mm, Max Turned Length 1050mm, X Axis Traverse 362mm, Z Axis Traverse 1105mm, Distance Between Centres 1100mm, Spindle Speeds 20 – 2000rpm, Spindle Bore 132mm, with 2 Point Hydraulic Steady, Swarf Conveyor, 380mm 3 Jaw Hydraulic Chuck, 10 Position Turret, Tool Probing, Approximate Dimensions 5700 x 2200 x 2050mm, Approximate Weight 8200kg. S/No. PM351215 (2002)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Daewoo Puma 300B 2 Axis CNC Lathe with Fanuc 18i-TB CNC Control, Swing Over Bed 570mm, Swing Over Saddle 370mm, Spindle Speeds 35 – 3500rpm, Spindle Bore 90mm, X Axis Traverse 282mm, Z Axis Traverse 1330mm, Max Turned Diameter 400mm, Maximum Turned Length 1298mm, Rapids X Axis 20m/min, Z Axis 24m/min, with 10 Position Turret, 3 Jaw Hydraulic Chuck, Tool Probing, Parts Catcher, Swarf Conveyor, Approximate Dimensions 4900 x 2450 x 2058mm, Approximate Weight 8000kg. S/No. P30L1376 (2003)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Puma 12 CNC Lathe with Fanuc 15T CNC Control, Swing Over Bed 580mm, Swing Over Saddle 380mm, Distance Between Centres 1200mm, 300mm 3 Jaw Hydraulic Chuck, 10 Position Turret, Swarf Conveyor. S/No. 440233

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mazak Variaxis 630-5X-II 5 Axis Machining Centre with Mazatrol Matrix CNC Control, X Axis Traverse 630mm, Y Axis Traverse 765mm, Z Axis Traverse 510mm, A Axis 150 Degrees (+30 to -120) C Axis 360 Degrees (0.001), Spindle Taper 40, Spindle Speeds 12,000rpm, 500mm 3 Jaw Pallet, 40 Station ATC, Through Spindle Coolant, Swarf Conveyor, Renishaw Probe Interface, Swarf Bin, Approximate Dimensions 4350 x 2400 x 3235mm, Approximate Weight 15,500kg. S/No. 200307 (2007)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Haas VF-3D/CE 4 Axis Vertical Machining Centre with Haas CNC Control, Table Dimension 1220 x 460mm, X Axis Traverse 1016mm, Y Axis Traverse 508mm, Z Axis Traverse 635mm, Maximum Table Load 1588kg, Spindle Speeds 8100rpm, Spindle Taper BT 40, Rapids 25, 4m/min, Centre Height of 4th Axis 235mm, 250mm 3 Jaw Chuck with 20 Position ATC, Swarf Auger, Approximate Dimensions 3600 x 2300 x 3000mm, Approximate Weight 6500kg. S/No. 1074573 (2009)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty BT40 Tooling suitable for Haas Machining Centre

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jones & Shipman Ultramat 1000 Easy-E CNC Cylindrical Grinder with GE Fanuc Control, Maximum Swing 320mm, Maximum Diameter Ground 300mm, Maximum Length Ground 1000mm, Infeed Traverse 260mm, Long Traverse 1150mm, Table Swivel 16 Degrees CCW, 10 Degrees CW, Work Head Speeds 1 – 660rpm, Work Head Swivels 105 Degrees, Grinding Wheel Size 457 x 50 x 203mm, Grinding Wheel Speed 45m/sec, Feeds 6m/min, Approximate Dimensions 4000 x 2000 x 2000mm, Approximate Weight 5500kg. S/No. S109217 (2007)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

WMW Model S16/1 AS-N X70 Internal Spindle Grinder, Maximum Swing Inside Guard 560mm, Maximum Distance Between Chuck & Grinding Spindle 1800mm, Cross Feed of Grinding Spindle Carriage 70mm, Work Head Swivel 30 Degrees, Work Head Cross Traverse 300mm, Drop Down Face Grinding, 3 Point Open Steady, Auto Wheel Dresser, Coolant, Magnetic Separator. S/No. 650812.

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

WMW Model S-16-1AS x 710 Internal Spindle Grinder, Maximum Swing Inside Guards 560mm, Maximum Distance Between Chuck & Grinding Spindle 1800mm, Work Head Swivels 30 Degrees, Drop Down Face Grinding, Auto Wheel Dresser, Coolant, Magnetic Separator. S/No. 680193

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Grinding Wheels

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

WMW Erfurt Model SU315 x 1500 Plain Cylindrical Grinder, Maximum Swing 315mm, Maximum Distance Between Centres 1500mm, Table Traverse 1680mm, Table Swivels 6 Degrees Each Way, Work Head Speeds 4 – 500rpm, Work Head Swivels 105 Degrees, Wheel Head Swivel 45 Degrees, Wheel Head Speeds 1385 / 1900rpm, with Magnetic Separator, Coolant, Fume Extraction, Approximate Dimensions 6150 x 2000 x 1500mm, Approximate Weight 5800kg. S/No. 8136

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

WMW Model S16//1ALS-Nx710 Internal Spindle Grinder, Maximum Swing Inside Guard 560mm, Maximum Distance Between Chuck & Grinding Spindle 3000mm, with 3 Point Open Steady, Drop Down Face Grinding, Auto Wheel Dressing, Coolant, Magnetic Separator. Serial No 680951

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

WMW Erfurt Model SU315 x 1500 Plain Cylindrical Grinder, Maximum Swing 315mm, Maximum Distance Between Centres 1500mm, Table Traverse 1680mm, Table Swivels 6 Degrees Each Way, Work Head Speeds 4 – 500rpm, Work Head Swivels 105 Degrees, Wheel Head Swivel 45 Degrees, Wheel Head Speeds 1385 / 1900rpm with Magnetic Separator, Coolant, Fume Extraction, Approximate Dimensions 6150 x 2000 x 1500mm, Approximate Weight 5800kg. S/No. 8133

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sunnen Model HTC 2300W CNC Horizontal Hydraulic Hone, Minimum Diameter 25mm, Maximum Diameter 1000mm, Maximum Outside Diameter 600mm, Maximum Stroke 2000mm, Stroke Feed Rate 1 – 40m/min, Spindle Speeds 15 – 433rpm, Spinde Motor 7kw, Stroke Motor 4.2kw, Maximum Component Weight 6000kg, Approximate Dimensions 6200 x 1200 x 1900mm, Approximate Weight 2600kg. S/No. C00047 (2012)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sunnen HTC-2300W CNC Horizontal Hydraulic Hone, Minimum Diameter 25mm, Maximum Diameter 1000mm, Maximum Outside Diameter 600mm, Maximum Stroke 2000mm, Stroke Feed Rate 1 – 40m/min, Spindle Speeds 15 – 433rpm, Spindle Motor 7kw, Stroke Motor 4.2kw, Maximum Component Weight 6000kg, Approximate Dimensions 6200 x 1200 x 1900mm, Approximate Weight 2600kg. S/No. C00012 (2009)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Fromag Model CNC E3 2-425PPC Keyseater with CNC Control Commander TF15, Tacktive Force 12Kn, Load Bearing 15 Ton, Keyway Width – Maximum 50 mm - 425 mm, Keyway Length – Maximum 406mm, Maximum Stroke Length 431mm, Cutting Speed – Stepless Variable 0-144 FPM, Return Speed - Steplessly Variable 0-164 FPM, Infeed Rate (Infinitely Variable)0 - 0.07874 IPM, with Index Table TA180A2-A, Approximate Dimension 1500 x 1600 x 1500mm, Approximate Weight 1250kg. S/No. 149392 (2012)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tooling for Fromag

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Company’s Own Tooling

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Fromag Model CNC E3 2-425PPC Keyseater, with CNC Control Commander TF15, Tacktive Force 12Kn, Load Bearing 15 Ton, Keyway Width – Maximum 50 mm - 425 mm, Keyway Length – Maximum 406mm, Maximum Stroke Length 431mm, Cutting Speed – Stepless Variable 0-144 FPM, Return Speed - Steplessly Variable 0-164 FPM, Infeed Rate (Infinitely Variable)0 - 0.07874 IPM, Complete With Index Table TA180A2-A, Approximate Dimension 1500 x 1600 x 1500mm, Approximate Weight 1250kg. S/No. 135153 (2008)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tooling for Fromag

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Beaver Universal Turret Milling Machine, Table 1120 x 255mm, Spindle Speeds 70 – 3500rpm, Approximate Dimensions 1700 x 1400 x 2250mm, Approximate Weight 1750mm

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Elliot No. 5 Tool & Cutter Grinder with Swivel Wheel Head, Extraction

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Abwood Vertical Spindle Surface Grinder with 300 x 150mm Magnetic Chuck, Coolant. S/No. 114

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Parkson 2N Horizontal Milling Machine with Swivel Vertical Head, Spindle Speeds 24 – 1330rpm, Spindle Taper 50 Int, Table Dimensions 1300 x 325mm. S/No. 734

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Amada Cutmaster HA250 Automatic Horizontal Bandsaw, Blade Speeds Variable, Feeds Variable, Bade Size 3500 x 25 x 0.889mm, Shuttle Vice, Cut Counter, Coolant, Roller Track. S/No. 452744

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

WinFlex Fin Power Hydraulic Hose Grimper

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Abrasive Pull Down Cut Off Saw

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydraulic Hose Spray Unit

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Kerry 100 Pedestal Drill, Spindle Speeds 70 – 1500rpm, Spindle Taper 3MT with Rise & Fall Table

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Gryphon Double Ended Pedestal Grinder, Wheel Dimension 200 x 20mm, Wheel Speeds 3000rpm with Clear View Guards

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Metabo Type 7211 Double Ended Pedestal Grinder, Wheel Size 200 x 25 x 32mm, Wheel Speed 3000rpm. S/No. 7551

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Buehler Abrasive Pull Down Cut Off Saw with Interlocked Enclosure Hood

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Butter 400 Amp Mig Welder

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Oxford 250 Amp Arc Welder with Cables & Torch

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Nederman Extractor. S/No. DC/001 (2007)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Turbex Heated Parts Washer, Model AC-2.0LD with Temperature Control, Cycle Timer, Approximate Weight 2000kg. S/No. 1675309 (2009)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

New and unused T Control Hot Parts Washing Machine Model Vasarapesukone with 2 Stage Blower/Dryer and 10kw Heater. Fully Stainless Steel Construction with Hydraulic Door Lift. S/No. 172017 (2018)

Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.