2826 - New, Ex.Demo & Used CNC, Conventional and Toolroom Machinery surplus to the requirements due to the relocation of Gate Machinery International Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Watford, UK. Please see individual lots for loading charges and information.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 101-110 von 191
Los 106: Gate Profitdrill PD-1B Bench Drill
Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor
This is an Ex Demonstration Machine - The recommended list price for this item is £700
Please Note: This Item is located in Watford, UK
Manual handling, preparation and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item.
Unfortunately there is no warranty with this machine.
Los 107: Gate Profitdrill PD-1B Bench Drill
Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor
This is an Ex Demonstration Machine - The recommended list price for this item is £700
Please Note: This Item is located in Watford, UK
Manual handling, preparation and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item.
Unfortunately there is no warranty with this machine.
Los 108: Gate G-330E High Speed Precision Centre Lathe
Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm. S/No. 9611425 (11/2007)
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine. ...
Los 109: Gate G-330E High Speed Precision Centre Lathe
Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm. S/No. 9611433 (11/2007)
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine. ...
Los 110: Gate G-330E High Speed Precision Centre Lathe
Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm.
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine.
Los 111: Gate G-330E High Speed Precision Centre Lathe
Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm.
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine.
Los 112: TFY Turret Mill
TFY Turret Mill with D.R.O
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine.
Los 113: Creusen DS9250 Grinder
Creusen DS9250 Grinder with Stand & Water Cup
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine.
Los 114: Epple MFS-150 Multi Functional Grinder
Epple MFS-150 Multi Functional Grinder, Blade Size: 2950rpm, 230V Motor
This is an Ex Demonstration Machine - The recommended list price for this item is £80
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.
Unfortunately there is no warranty with this machine.
Los 115: Epple DS-150 Double Ended Grinder
Epple DS-150 Double Ended Grinder, Grinding Disk Dimensions: 150 x 20 x 16mm, Speed: 2850min, 230V
This is an Ex Demonstration Machine - The recommended list price for this item is £55
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.