2682 - Engineering Equipment available on behalf of a Retained Client
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
With the exception of Lot 2 which is subject to a loading charge.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 41-50 von 81
Los 44: WMW Saalfeld Model BS4A1 Single Spindle Drill
WMW Saalfeld Model BS4A1 Single Spindle Drill, Table Size 700m x 580mm, 4 Morse Taper, Spindle Speeds 63 - 1000rpm, Power Feed to Spindle.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 47: Herbert 2-Spindle In Line Drill
Herbert 2-Spindle In Line Drill, Table 24" x 15", 1-Spindle 2 Morse 448 - 2415. 1-Spindle 3 Morse and Power Feed, Speeds 104 - 502.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 48: Fobco 7/Eight Pillar Drill
Fobco 7/Eight Pillar Drill, Table 20' x 18", Spindle Taper 2 Morse, Spindle Speeds 51 - 2650.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 50: Fobco 7/Eight Pillar Drill
Fobco 7/Eight Pillar Drill, Table 20' x 18", Spindle Taper 2 Morse, Spindle Speeds 51 - 2650.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 51: Pollard Model 150A/1 Geared Head Pedestal Drill
Pollard Model 150A/1 Geared Head Pedestal Drill, Spindle Taper No.3 Morse, Spindle Speeds 86 - 1920rpm, Table Size 24" x 15 1/2", Throat 11 1/4", Power Feeds to Spindle.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 53: AJAX Arboga Type G2508 Gear Head Pedestal Drill
AJAX Arboga Type G2508 Gear Head Pedestal Drill, Table 500mm x 400mm, Throat Size 220mm, Geared Head, 3 Morse Taper, Speeds 100 - 2900rpm, Rack & Pinion Rise and Fall Table.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 54: Jones & Shipman Model 1310 EU Cylindrical Grinding Machine
Jones & Shipman Model 1310 EU Cylindrical Grinding Machine, Capacity 8" x 18", Wheelhead Speeds 1750&2300rpm, Grinding Wheel Sizes 7" - 12", Workhead Speeds 30 - 415rpm, Swivelling Wheelhead, Swivel Table/Swivel Workhead, Imperial Dials, 4 Jaw Chuck, 2 and 3 Point Steadies.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 55: Jones & Shipman 1212E High Precision Cylindrical Grinder
Jones & Shipman 1212E High Precision Cylindrical Grinder, Capacity 3" x 12", Swing Over Table 5" Diameter, Swivel Table 20 Degrees.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 56: Lumsden Vertical Spindle Surface Grinder
Lumsden Vertical Spindle Surface Grinder, Magnetic Table 36" x 10", Grinding Head Diameter 18".
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 57: Jakobson 300 F A Toolroom Surface Grinder
Jakobson 300 F A Toolroom Surface Grinder, Capacity 800mm x 250mm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.