2674 - Large Selection of Extrusion Blow Moulding & Injection Stretch Blow Moulding Machinery & Ancillary Equipment previously used in the Manufacturing of Detergent & Soap Bottles by Pizzolotto Detersivi dal 1919 srl, Belluno, Italy
Miscellaneous
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Belluno, Italy.
Unfortunately, there are no loading facilities available
on-site. Dismantling and Loading will be at the cost of
the purchaser.
Please click here to view the products manufactured with this equipment
Please click here to view Loading Fees for lots in this auction
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 22.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer. Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 21-30 von 141
Los 7: AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine
AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. SDLL0231 (2003) with Control Panel, Injection Clamping Force 720.7KN, Blow Clamping Force 646.2KN, Mag-plastics Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3600
Los 8: AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine
AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. 9350090 (1993) with Control Panel, Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3600
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 8A: Moulds for AOKI Machine
Moulds for AOKI Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €30
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of lots 8 & 8A
Combination of lots 8 & 8A
AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. 9350090 (1993) with Control Panel, Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for AOKI Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3630
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
8 | AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine |
8A | Moulds for AOKI Machine |
Los 9: TECHNE SYSTEM 4000 TWIN Extrusion Blow Moulding Machine
TECHNE SYSTEM 4000 TWIN Extrusion Blow Moulding Machine. S/No. 90112 (1999) with Microset MT1A Control Panel, 80/25 Extruder, 4 Heads, Clamping Force 135KN, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 4 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €2450
Los 10: TECHNE SYSTEM 15000 SN Extrusion Blow Moulding Machine
TECHNE SYSTEM 15000 SN Extrusion Blow Moulding Machine. S/No. 90461 (2008) with Barber-Colman/Eurotherm Control Panel, 90/25 Extruder, 4 Heads, Clamping Force 220KN, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 3 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3100
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 10A: Moulds for TECHNE SYSTEM 15000SN (4) Pallets
Moulds for TECHNE SYSTEM 15000SN (4) Pallets
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €40
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of lots 10 & 10A
Combination of lots 10 & 10A
TECHNE SYSTEM 15000 SN Extrusion Blow Moulding Machine. S/No. 90461 (2008) with Barber-Colman/Eurotherm Control Panel, 90/25 Extruder, 4 Heads, Clamping Force 220KN, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 3 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for TECHNE SYSTEM 15000SN (4) Pallets
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3140
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
10 | TECHNE SYSTEM 15000 SN Extrusion Blow Moulding Machine |
10A | Moulds for TECHNE SYSTEM 15000SN (4) Pallets |
Los 11: TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine
TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine. S/No. 90063 (1998) with Barber-Colman Control Panel, 90/25 Extruder, 4 Heads, Clamping Force 220KN, Bottle Stripe Facility with Dedicated Control, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 1.5, 2 & 2.5 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3100
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 11A: Moulds for TECHNE SYSTEM 15000S (1) Pallet
Moulds for TECHNE SYSTEM 15000S (1) Pallet
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €20