2240 - Equipment no longer required due to the Retirement of the Directors at Gramton Engineering Company Ltd & Others
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location:- These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 15.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 11-20 von 79
Los 9: Dean Smith Grace Type 1709 x 60 Gap Bed Centre Lathe
Dean Smith Grace Type 1709 x 60 Gap Bed Centre Lathe. 17" Swing over bed. 24" Swing in gap. 60" Distance Between Centres. 3" Spindle Bore. Spindle Speeds 8 - 900rpm. Dual Dials. Power Drilling Attachment.
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 10: Emco Turn 140 CNC Lathe
Emco Turn 140 CNC Lathe. Emcotronic T1 Control. 340mm Swing Over Bed. 158mm Swing Over Cross Slide. 300mm X & Y Traverse. 30mm Spindle Bore. Spindle Speeds: 150-2500rpm.
Please Note:- This Lot is for Spares & Repairs Only
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 11: XYZ 1330 Gap Bed Centre Lathe
XYZ 1330 Gap Bed Centre Lathe, 13" Swing over bed. 8" Swing over Cross Slide, 18" Swing in gap. 30" Distance Between Centres, 1.3/8" Spindle Bore, Spindle Speeds 53 - 2000rpm, Metric Leadscrew & Dials, 3 & 4 Jaw Chucks, Quick Change Tool Post and Tool Holders
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 12: Colchester Chipmaster Variable Speed Centre Lathe
Colchester Chipmaster Variable Speed Centre Lathe, 11.1/4" Swing over bed. 20" Distance Between Centres. 1.3/8" Spindle Bore. Spindle Speeds: 35-3000rpm. Motor Size 3HP. 3 Jaw Chuck. Quick Change Toolpost. 2 & 3 Point Steadies.
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 13: Bridgeport Interact Series 1 CNC Milling Machine
Bridgeport Interact Series 1 CNC Milling Machine with Heidenhain TNC 151 Control, Table Size: 860mm x 320mm
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 14: Bridgeport Type BR2J Turret Milling Machine
Bridgeport Type BR2J Turret Milling Machine, Variable Speed Head, 42" x 9" Table Size, Power Feed to Table
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 15: Bridgeport Type BR2J Turret Milling Machine
Bridgeport Type BR2J Turret Milling Machine, Variable Speed Head. 48" x 9" Table Size
Please Note: This Machine is for Spares & Repairs Only
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 16: Elliott Model 02 Universal Turret Mill
Elliott Model 02 Universal Turret Mill with 40 ISO Horizontal Spindle, 30 ISO Vertical Spindle, Swivel Table Size: 45" x 11.1/2", Vertical Spindle Speeds: 80-2700rpm, Horizontal Spindle Speeds: 31-1010rpm, Swivel Vertical Head with Power Feed, Power Feed to Table.
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 17: Mas Vertical Mill
Mas Vertical Mill, Table Size 53" x 11.1/2". 50 ISO Spindle Taper, Power Feed to Table on X Axis, Power Feed to Knee, Spindle Speeds 40 - 1250rpm.
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.
Los 18: Tos FNK 25A Turret Milling Machine
Tos FNK 25A Turret Milling Machine, Table Size: 49" x 11.1/2", Spindle 40 ISO, Speeds: 56-4500 rpm
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.