2914 - XYZ, Boxford, Miyano & Colchester Lathes, Bridgeport, Boxford & Yang Eagle Milling Machines and Toolroom Equipment
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Tamworth and Burntwood. Please see individual lots for loading information. All/Any tooling is being offered as specifically described.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 11-20 von 65
Los 10: Bridgeport 600-22 Vertical Machining Centre
Bridgeport 600-22 Vertical Machining Centre with Heidenhain 370 Control, Table Size 840 x 420mm, X Axis Travel 600mm, Y Axis Travel 410mm, Z Axis Travel 520mm, 22 Station Tool Changer, Swarf Conveyor. S/No. 721409 (1998)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 11: Bridgeport 600-22 Vertical Machining Centre
Bridgeport 600-22 Vertical Machining Centre with Heidenhain 370 Control, Table Size 840 x 420mm, X Axis Travel 600mm, Y Axis Travel 410mm, Z Axis Travel 520mm, 22 Station Tool Changer. S/No. 720272 (1997)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 12: Bridgeport 600-22 Vertical Machining Centre
Bridgeport 600-22 Vertical Machining Centre with Heidenhain 370 Control, Table Size 840 x 420mm, X Axis Travel 600mm, Y Axis Travel 410mm, Z Axis Travel 520mm, 22 Station Tool Changer, Swarf Conveyor. S/No. 720695 (1997)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 13: Bridgeport VMC 560-16
Bridgeport VMC 560-16 Heidenhain 2500 Control. S/No. 35105
Please Note: This lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Los 14: Adcock & Shipley 3S Universal Bed Miller
Adcock & Shipley 3S Universal Bed Miller, Table Size: 1500mm x 630mm, Double Swivel Head, Spindle Taper 50 Int, 2 Axis DRO.
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 15: Binns & Berry Trident L1000 Gap Bed Lathe
Binns & Berry Trident L1000 Gap Bed Lathe, Swing Over Bed 1000mm, Swing in Gap 1500mm, Swing Over Saddle 850mm, Distance Between Centres 1350mm, Spindle Speeds 4 – 1250rpm, 900mm 4 Jaw Chuck, 4 Way Toolpost, S/No. 61490 (1981) Manuals.
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 16: Alpa RTM 1600 Surface Grinder
Alpa RTM 1600 Surface Grinder, 1520 x 560 Magnetic Chuck, X Travel 1600mm, Y Travel 625mm, Z Travel 700mm, Power Rise & Fall Incremental Down Feed. S/No. 0378003
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 17: Mollart Omnisprint Twin Spindle Drilling Machine
Mollart Omnisprint LO2-750 Twin Spindle Drilling Machine with Fanuc Power Mate Control. S/No. A0565-0400 (2005)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 18: Mollart Omnisprint Twin Spindle Drilling Machine
Mollart Omnisprint Twin Spindle Drilling Machine with GE Fanuc Series 21iM Control. S/No. A461 1200 (2001)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 19: Approx. 90 Drills
Approx. 90 Drills
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.