2914 - XYZ, Boxford, Miyano & Colchester Lathes, Bridgeport, Boxford & Yang Eagle Milling Machines and Toolroom Equipment

Engineering

Asta conclusa il

2020-09-02 15:00:00.0

Tempo residuo

Fine asta

Descrizione asta

Please Note: These lots are located in Tamworth and Burntwood. Please see individual lots for loading information. All/Any tooling is being offered as specifically described.

Premio dell'acquirente

Il premio dell'acquirente verrà addebitato a 18.00%.

IVA

IVA applicata pari al 20.00%.

Date ispezioni

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acquirente è responsabile a proprie spese per lo scollegamento, smontaggio e rimozione degli articoli acquistati dal luogo dell'asta. Se l'acquirente intende esportare articoli acquistati all'asta, sarà responsabile a proprie spese a garantire e rispettare tutte le condizioni di esportazione del Regno Unito e l'ottenimento di eventuali licenze di esportazione.

Spunta la casella qui sotto e clicca su conferma


* Nota Bene: - Qualsiasi traduzione uttilizzando ''Google Translate'' non è garantita come una traduzione accurata ed è solo a scopo di guida. La descrizione principale del lotto è in inglese ed e data a migliore conoscenza del banditore. Tuttavia, la precisione non è garantita e deve essere verificata dall'acquirente prima di fare offerte.

Avviso ai compratori

Termine ultimo pagamento

2020-09-04 17:00:00.0

Termine ultimo ritiro

2020-09-17 17:00:00.0

Spedizionieri

Squadre per il carico

Dettagli Esportazione/importazione dal UK

Lotti 1-10 di 65

La chiusura dell'asta relativa ad un lotto verrà posticipata se vengono effettuate offerte nei 10 minuti precedenti la sua chiusura.
Preview image
Chiusura:
02 set 2020 15:30:00 BST
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
18.00%
IVA:
20.00%

Lotto 1: XYZ SLX 555 x 1.75m CNC Lathe

XYZ SLX 555 x 1.75m CNC Lathe with Proto Trak SLX Control, Swing Over Bed 560mm, Distance Between Centres 1750mm, Spindle Speeds 30 – 1800rpm (2014)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
02 set 2020 16:10:00 BST
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
18.00%
IVA:
20.00%

Lotto 1A: Webster & Bennett

Webster & Bennett 42" Table, Extended Height, 46" Swing, Digital Read Out. S/No. 6437-4

Please Note: This lot is located in Burntwood. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
02 set 2020 16:00:00 BST
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
18.00%
IVA:
20.00%

Lotto 2: Boxford T220i CNC Lathe

Boxford T220i CNC Lathe, Swing Over Bed 210mm, X Axis Travel: 150mm, Y Axis Travel 350mm, Distance Between Centres 400mm, Spindle Bore 25mm, Spindle Speeds 200 – 4000rpm, 8 Station Turret. S/No. 11019/1214 (2014)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
02 set 2020 16:20:00 BST
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
18.00%
IVA:
20.00%

Lotto 3: Miyano BNC-42C3 CNC Lathe

Miyano BNC-42C3 CNC Lathe with Fanuc 21i-T Control, Imenca VIP 70 Bar Feed, X Axis Travel 100mm, Y Axis Travel 185mm, 8 Station Turret, Collet Chuck, Parts Chucker. S/No. BC-30188 (2001)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
02 set 2020 16:10:00 BST
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
18.00%
IVA:
20.00%

Lotto 4: Colchester Tornado 220m CNC Lathe

Colchester Tornado 220m CNC Lathe with Fanuc 21-TB Control, Driven Tools, Swing Over Bed 510mm, X Axis Travel 235mm, Y Axis Travel 540mm, C Axis 0.001◦, Spindle Bore 77.5mm, Tailstock, Tornado MBF 1000 Short Magazine Bar Feed, Swarf Conveyor. S/No. T40060 (2003) Manuals.

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
02 set 2020 16:10:00 BST
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
18.00%
IVA:
20.00%

Lotto 5: Colchester Combi 2000 Lathe

Colchester Combi 2000 Lathe with Fanuc 210T Control, 400mm Swing Over Bed, 245mm Swing Over Cross Slide, 585 Swing In Gap, 1250mm Between Centres, 3 Jaw Chuck. S/No. E70003 (1998)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
02 set 2020 15:30:00 BST
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
18.00%
IVA:
20.00%

Lotto 6: Emco Turn 320 CNC Lathe

Emco Turn 320 CNC Lathe with Siemens Control, 8 Station Turret, Tailstock

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
02 set 2020 15:50:00 BST
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
18.00%
IVA:
20.00%

Lotto 7: Boxford 300 VMCi Vertical Machining Centre

Boxford 300 VMCi Vertical Machining Centre, X Axis Travel 304mm, Y Axis 157mm, Z Axis 218mm, 8 Station Tool Changer. S/No. 11157/03/16 (2016)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
02 set 2020 16:10:00 BST
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
18.00%
IVA:
20.00%

Lotto 8: Yang Eagle SMV-600 Vertical Machining Centre

Yang Eagle SMV-600 Vertical Machining Centre with Fanuc O-MD Control, Table Size 750mm x 360mm, X Travel 600mm, Y Travel 410mm, Z Travel 510mm, 20 Station ATC, Manuals. S/No. 200834 (2000)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Chiusura:
02 set 2020 16:10:00 BST
Tempo residuo:
Tempo scaduto
Premio dell'acquirente:
18.00%
IVA:
20.00%

Lotto 9: Bridgeport 800 – 22 Vertical Machining Centre

Bridgeport 800 – 22 Vertical Machining Centre with Heidenhain 370 Control, Table Size 1000mm x 490mm, X Axis Travel 800mm, Y Axis Travel 510mm, Z Axis Travel 500mm, 22 Station Tool Changer. S/No. 820397 (1996)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categorie